mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
4213d52b33
This implementation allows pwr i2c writing on early SPL stages when DM is not yet setup. Such writing is needed to configure main voltages of PMIC on early SPL for bootloader to boot properly. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Tested-by: Thierry Reding <treding@nvidia.com> # T30 and T124 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Tom <twarren@nvidia.com>
174 lines
5.4 KiB
C
174 lines
5.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* NVIDIA Tegra I2C controller
|
|
*
|
|
* Copyright 2010-2011 NVIDIA Corporation
|
|
*/
|
|
|
|
#ifndef _TEGRA_I2C_H_
|
|
#define _TEGRA_I2C_H_
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
|
|
struct udevice;
|
|
|
|
enum {
|
|
I2C_TIMEOUT_USEC = 10000, /* Wait time for completion */
|
|
I2C_FIFO_DEPTH = 8, /* I2C fifo depth */
|
|
};
|
|
|
|
enum i2c_transaction_flags {
|
|
I2C_IS_WRITE = 0x1, /* for I2C write operation */
|
|
I2C_IS_10_BIT_ADDRESS = 0x2, /* for 10-bit I2C slave address */
|
|
I2C_USE_REPEATED_START = 0x4, /* for repeat start */
|
|
I2C_NO_ACK = 0x8, /* for slave that won't generate ACK */
|
|
I2C_SOFTWARE_CONTROLLER = 0x10, /* for I2C transfer using GPIO */
|
|
I2C_NO_STOP = 0x20,
|
|
};
|
|
|
|
/* Contians the I2C transaction details */
|
|
struct i2c_trans_info {
|
|
/* flags to indicate the transaction details */
|
|
enum i2c_transaction_flags flags;
|
|
u32 address; /* I2C slave device address */
|
|
u32 num_bytes; /* number of bytes to be transferred */
|
|
/*
|
|
* Send/receive buffer. For the I2C send operation this buffer should
|
|
* be filled with the data to be sent to the slave device. For the I2C
|
|
* receive operation this buffer is filled with the data received from
|
|
* the slave device.
|
|
*/
|
|
u8 *buf;
|
|
int is_10bit_address;
|
|
};
|
|
|
|
struct i2c_control {
|
|
u32 tx_fifo;
|
|
u32 rx_fifo;
|
|
u32 packet_status;
|
|
u32 fifo_control;
|
|
u32 fifo_status;
|
|
u32 int_mask;
|
|
u32 int_status;
|
|
};
|
|
|
|
struct dvc_ctlr {
|
|
u32 ctrl1; /* 00: DVC_CTRL_REG1 */
|
|
u32 ctrl2; /* 04: DVC_CTRL_REG2 */
|
|
u32 ctrl3; /* 08: DVC_CTRL_REG3 */
|
|
u32 status; /* 0C: DVC_STATUS_REG */
|
|
u32 ctrl; /* 10: DVC_I2C_CTRL_REG */
|
|
u32 addr_data; /* 14: DVC_I2C_ADDR_DATA_REG */
|
|
u32 reserved_0[2]; /* 18: */
|
|
u32 req; /* 20: DVC_REQ_REGISTER */
|
|
u32 addr_data3; /* 24: DVC_I2C_ADDR_DATA_REG_3 */
|
|
u32 reserved_1[6]; /* 28: */
|
|
u32 cnfg; /* 40: DVC_I2C_CNFG */
|
|
u32 cmd_addr0; /* 44: DVC_I2C_CMD_ADDR0 */
|
|
u32 cmd_addr1; /* 48: DVC_I2C_CMD_ADDR1 */
|
|
u32 cmd_data1; /* 4C: DVC_I2C_CMD_DATA1 */
|
|
u32 cmd_data2; /* 50: DVC_I2C_CMD_DATA2 */
|
|
u32 reserved_2[2]; /* 54: */
|
|
u32 i2c_status; /* 5C: DVC_I2C_STATUS */
|
|
struct i2c_control control; /* 60 ~ 78 */
|
|
};
|
|
|
|
struct i2c_ctlr {
|
|
u32 cnfg; /* 00: I2C_I2C_CNFG */
|
|
u32 cmd_addr0; /* 04: I2C_I2C_CMD_ADDR0 */
|
|
u32 cmd_addr1; /* 08: I2C_I2C_CMD_DATA1 */
|
|
u32 cmd_data1; /* 0C: I2C_I2C_CMD_DATA2 */
|
|
u32 cmd_data2; /* 10: DVC_I2C_CMD_DATA2 */
|
|
u32 reserved_0[2]; /* 14: */
|
|
u32 status; /* 1C: I2C_I2C_STATUS */
|
|
u32 sl_cnfg; /* 20: I2C_I2C_SL_CNFG */
|
|
u32 sl_rcvd; /* 24: I2C_I2C_SL_RCVD */
|
|
u32 sl_status; /* 28: I2C_I2C_SL_STATUS */
|
|
u32 sl_addr1; /* 2C: I2C_I2C_SL_ADDR1 */
|
|
u32 sl_addr2; /* 30: I2C_I2C_SL_ADDR2 */
|
|
u32 reserved_1[2]; /* 34: */
|
|
u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */
|
|
u32 reserved_2[4]; /* 40: */
|
|
struct i2c_control control; /* 50 ~ 68 */
|
|
u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */
|
|
};
|
|
|
|
/* bit fields definitions for IO Packet Header 1 format */
|
|
#define PKT_HDR1_PROTOCOL_SHIFT 4
|
|
#define PKT_HDR1_PROTOCOL_MASK (0xf << PKT_HDR1_PROTOCOL_SHIFT)
|
|
#define PKT_HDR1_CTLR_ID_SHIFT 12
|
|
#define PKT_HDR1_CTLR_ID_MASK (0xf << PKT_HDR1_CTLR_ID_SHIFT)
|
|
#define PKT_HDR1_PKT_ID_SHIFT 16
|
|
#define PKT_HDR1_PKT_ID_MASK (0xff << PKT_HDR1_PKT_ID_SHIFT)
|
|
#define PROTOCOL_TYPE_I2C 1
|
|
|
|
/* bit fields definitions for IO Packet Header 2 format */
|
|
#define PKT_HDR2_PAYLOAD_SIZE_SHIFT 0
|
|
#define PKT_HDR2_PAYLOAD_SIZE_MASK (0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT)
|
|
|
|
/* bit fields definitions for IO Packet Header 3 format */
|
|
#define PKT_HDR3_READ_MODE_SHIFT 19
|
|
#define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT)
|
|
#define PKT_HDR3_REPEAT_START_SHIFT 16
|
|
#define PKT_HDR3_REPEAT_START_MASK (1 << PKT_HDR3_REPEAT_START_SHIFT)
|
|
#define PKT_HDR3_SLAVE_ADDR_SHIFT 0
|
|
#define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT)
|
|
|
|
#define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT 26
|
|
#define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK \
|
|
(1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT)
|
|
|
|
/* I2C_CNFG */
|
|
#define I2C_CNFG_NEW_MASTER_FSM_SHIFT 11
|
|
#define I2C_CNFG_NEW_MASTER_FSM_MASK (1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT)
|
|
#define I2C_CNFG_PACKET_MODE_SHIFT 10
|
|
#define I2C_CNFG_PACKET_MODE_MASK (1 << I2C_CNFG_PACKET_MODE_SHIFT)
|
|
|
|
/* I2C_SL_CNFG */
|
|
#define I2C_SL_CNFG_NEWSL_SHIFT 2
|
|
#define I2C_SL_CNFG_NEWSL_MASK (1 << I2C_SL_CNFG_NEWSL_SHIFT)
|
|
|
|
/* I2C_FIFO_STATUS */
|
|
#define TX_FIFO_FULL_CNT_SHIFT 0
|
|
#define TX_FIFO_FULL_CNT_MASK (0xf << TX_FIFO_FULL_CNT_SHIFT)
|
|
#define TX_FIFO_EMPTY_CNT_SHIFT 4
|
|
#define TX_FIFO_EMPTY_CNT_MASK (0xf << TX_FIFO_EMPTY_CNT_SHIFT)
|
|
|
|
/* I2C_INTERRUPT_STATUS */
|
|
#define I2C_INT_XFER_COMPLETE_SHIFT 7
|
|
#define I2C_INT_XFER_COMPLETE_MASK (1 << I2C_INT_XFER_COMPLETE_SHIFT)
|
|
#define I2C_INT_NO_ACK_SHIFT 3
|
|
#define I2C_INT_NO_ACK_MASK (1 << I2C_INT_NO_ACK_SHIFT)
|
|
#define I2C_INT_ARBITRATION_LOST_SHIFT 2
|
|
#define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT)
|
|
|
|
/* I2C_CLK_DIVISOR_REGISTER */
|
|
#define CLK_DIV_STD_FAST_MODE 0x19
|
|
#define CLK_DIV_HS_MODE 1
|
|
#define CLK_MULT_STD_FAST_MODE 8
|
|
|
|
/**
|
|
* Returns the bus number of the DVC controller
|
|
*
|
|
* Return: number of bus, or -1 if there is no DVC active
|
|
*/
|
|
int tegra_i2c_get_dvc_bus(struct udevice **busp);
|
|
|
|
/* Pre-dm section used for initial setup of PMIC */
|
|
#define I2C_SEND_2_BYTES 0x0A02
|
|
|
|
static inline void tegra_i2c_ll_write(uint addr, uint data)
|
|
{
|
|
struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
|
|
|
|
writel(addr, ®->cmd_addr0);
|
|
writel(0x2, ®->cnfg);
|
|
|
|
writel(data, ®->cmd_data1);
|
|
writel(I2C_SEND_2_BYTES, ®->cnfg);
|
|
}
|
|
|
|
void pmic_enable_cpu_vdd(void);
|
|
|
|
#endif /* _TEGRA_I2C_H_ */
|