mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
280 lines
7 KiB
C
280 lines
7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <cpu_func.h>
|
|
#include <env.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <mvebu_mmc.h>
|
|
|
|
void reset_cpu(void)
|
|
{
|
|
struct kwcpu_registers *cpureg =
|
|
(struct kwcpu_registers *)KW_CPU_REG_BASE;
|
|
|
|
writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
|
|
&cpureg->rstoutn_mask);
|
|
writel(readl(&cpureg->sys_soft_rst) | 1,
|
|
&cpureg->sys_soft_rst);
|
|
while (1) ;
|
|
}
|
|
|
|
/*
|
|
* Window Size
|
|
* Used with the Base register to set the address window size and location.
|
|
* Must be programmed from LSB to MSB as sequence of ones followed by
|
|
* sequence of zeros. The number of ones specifies the size of the window in
|
|
* 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
|
|
* NOTE: A value of 0x0 specifies 64-KByte size.
|
|
*/
|
|
unsigned int kw_winctrl_calcsize(unsigned int sizeval)
|
|
{
|
|
int i;
|
|
unsigned int j = 0;
|
|
u32 val = sizeval >> 1;
|
|
|
|
for (i = 0; val >= 0x10000; i++) {
|
|
j |= (1 << i);
|
|
val = val >> 1;
|
|
}
|
|
return (0x0000ffff & j);
|
|
}
|
|
|
|
static const struct mbus_win windows[] = {
|
|
/* Window 0: PCIE MEM address space */
|
|
{ KW_DEFADR_PCI_MEM, KW_DEFADR_PCI_MEM_SIZE,
|
|
KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_MEM },
|
|
|
|
/* Window 1: PCIE IO address space */
|
|
{ KW_DEFADR_PCI_IO, KW_DEFADR_PCI_IO_SIZE,
|
|
KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_IO },
|
|
|
|
/* Window 2: NAND Flash address space */
|
|
{ KW_DEFADR_NANDF, 1024 * 1024 * 128,
|
|
KWCPU_TARGET_MEMORY, KWCPU_ATTR_NANDFLASH },
|
|
|
|
/* Window 3: SPI Flash address space */
|
|
{ KW_DEFADR_SPIF, 1024 * 1024 * 128,
|
|
KWCPU_TARGET_MEMORY, KWCPU_ATTR_SPIFLASH },
|
|
|
|
/* Window 4: BOOT Memory address space */
|
|
{ KW_DEFADR_BOOTROM, 1024 * 1024 * 128,
|
|
KWCPU_TARGET_MEMORY, KWCPU_ATTR_BOOTROM },
|
|
|
|
/* Window 5: Security SRAM address space */
|
|
{ KW_DEFADR_SASRAM, 1024 * 64,
|
|
KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM },
|
|
};
|
|
|
|
/*
|
|
* SYSRSTn Duration Counter Support
|
|
*
|
|
* Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
|
|
* When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
|
|
* The SYSRSTn duration counter is useful for implementing a manufacturer
|
|
* or factory reset. Upon a long reset assertion that is greater than a
|
|
* pre-configured environment variable value for sysrstdelay,
|
|
* The counter value is stored in the SYSRSTn Length Counter Register
|
|
* The counter is based on the 25-MHz reference clock (40ns)
|
|
* It is a 29-bit counter, yielding a maximum counting duration of
|
|
* 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
|
|
* it remains at this value until counter reset is triggered by setting
|
|
* bit 31 of KW_REG_SYSRST_CNT
|
|
*/
|
|
static void kw_sysrst_action(void)
|
|
{
|
|
int ret;
|
|
char *s = env_get("sysrstcmd");
|
|
|
|
if (!s) {
|
|
debug("Error.. %s failed, check sysrstcmd\n",
|
|
__FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
debug("Starting %s process...\n", __FUNCTION__);
|
|
ret = run_command(s, 0);
|
|
if (ret != 0)
|
|
debug("Error.. %s failed\n", __FUNCTION__);
|
|
else
|
|
debug("%s process finished\n", __FUNCTION__);
|
|
}
|
|
|
|
static void kw_sysrst_check(void)
|
|
{
|
|
u32 sysrst_cnt, sysrst_dly;
|
|
char *s;
|
|
|
|
/*
|
|
* no action if sysrstdelay environment variable is not defined
|
|
*/
|
|
s = env_get("sysrstdelay");
|
|
if (s == NULL)
|
|
return;
|
|
|
|
/* read sysrstdelay value */
|
|
sysrst_dly = (u32)dectoul(s, NULL);
|
|
|
|
/* read SysRst Length counter register (bits 28:0) */
|
|
sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT));
|
|
debug("H/w Rst hold time: %d.%d secs\n",
|
|
sysrst_cnt / SYSRST_CNT_1SEC_VAL,
|
|
sysrst_cnt % SYSRST_CNT_1SEC_VAL);
|
|
|
|
/* clear the counter for next valid read*/
|
|
writel(1 << 31, KW_REG_SYSRST_CNT);
|
|
|
|
/*
|
|
* sysrst_action:
|
|
* if H/w Reset key is pressed and hold for time
|
|
* more than sysrst_dly in seconds
|
|
*/
|
|
if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly)
|
|
kw_sysrst_action();
|
|
}
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
char *rev = "??";
|
|
u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
|
|
u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
|
|
|
|
if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
|
|
printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
|
|
return -1;
|
|
}
|
|
|
|
switch (revid) {
|
|
case 0:
|
|
if (devid == 0x6281)
|
|
rev = "Z0";
|
|
else if (devid == 0x6282)
|
|
rev = "A0";
|
|
break;
|
|
case 1:
|
|
rev = "A1";
|
|
break;
|
|
case 2:
|
|
rev = "A0";
|
|
break;
|
|
case 3:
|
|
rev = "A1";
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
printf("SoC: Kirkwood 88F%04x_%s\n", devid, rev);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DISPLAY_CPUINFO */
|
|
|
|
#ifdef CONFIG_ARCH_CPU_INIT
|
|
int arch_cpu_init(void)
|
|
{
|
|
u32 reg;
|
|
struct kwcpu_registers *cpureg =
|
|
(struct kwcpu_registers *)KW_CPU_REG_BASE;
|
|
|
|
/* Linux expects the internal registers to be at 0xf1000000 */
|
|
writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);
|
|
|
|
/* Enable and invalidate L2 cache in write through mode */
|
|
writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
|
|
invalidate_l2_cache();
|
|
|
|
#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
|
|
/*
|
|
* Configures the I/O voltage of the pads connected to Egigabit
|
|
* Ethernet interface to 1.8V
|
|
* By default it is set to 3.3V
|
|
*/
|
|
reg = readl(KW_REG_MPP_OUT_DRV_REG);
|
|
reg |= (1 << 7);
|
|
writel(reg, KW_REG_MPP_OUT_DRV_REG);
|
|
#endif
|
|
#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
|
|
/*
|
|
* Set egiga port0/1 in normal functional mode
|
|
* This is required becasue on kirkwood by default ports are in reset mode
|
|
* OS egiga driver may not have provision to set them in normal mode
|
|
* and if u-boot is build without network support, network may fail at OS level
|
|
*/
|
|
reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
|
|
reg &= ~(1 << 4); /* Clear PortReset Bit */
|
|
writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
|
|
reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
|
|
reg &= ~(1 << 4); /* Clear PortReset Bit */
|
|
writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
|
|
#endif
|
|
#ifdef CONFIG_KIRKWOOD_PCIE_INIT
|
|
/*
|
|
* Enable PCI Express Port0
|
|
*/
|
|
reg = readl(&cpureg->ctrl_stat);
|
|
reg |= (1 << 0); /* Set PEX0En Bit */
|
|
writel(reg, &cpureg->ctrl_stat);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ARCH_CPU_INIT */
|
|
|
|
/*
|
|
* SOC specific misc init
|
|
*/
|
|
#if defined(CONFIG_ARCH_MISC_INIT)
|
|
int arch_misc_init(void)
|
|
{
|
|
volatile u32 temp;
|
|
|
|
/*CPU streaming & write allocate */
|
|
temp = readfr_extra_feature_reg();
|
|
temp &= ~(1 << 28); /* disable wr alloc */
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
temp = readfr_extra_feature_reg();
|
|
temp &= ~(1 << 29); /* streaming disabled */
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
/* L2Cache settings */
|
|
temp = readfr_extra_feature_reg();
|
|
/* Disable L2C pre fetch - Set bit 24 */
|
|
temp |= (1 << 24);
|
|
/* enable L2C - Set bit 22 */
|
|
temp |= (1 << 22);
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
/* Change reset vector to address 0x0 */
|
|
temp = get_cr();
|
|
set_cr(temp & ~CR_V);
|
|
|
|
/* Configure mbus windows */
|
|
mvebu_mbus_probe(windows, ARRAY_SIZE(windows));
|
|
|
|
/* checks and execute resset to factory event */
|
|
kw_sysrst_check();
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ARCH_MISC_INIT */
|
|
|
|
#ifdef CONFIG_MVGBE
|
|
int cpu_eth_init(struct bd_info *bis)
|
|
{
|
|
mvgbe_initialize(bis);
|
|
return 0;
|
|
}
|
|
#endif
|