mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 19:23:07 +00:00
f29eaadeb5
This patch adds the dtsi/dts files needed to support the Marvell Octeon TX2 CN913x DB. This is only the base port with not all interfaces supported fully. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
166 lines
3.8 KiB
Text
166 lines
3.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018-2021 Marvell International Ltd.
|
|
*/
|
|
|
|
#undef CP110_NAME
|
|
#undef CP110_NUM
|
|
#undef CP110_PCIE_MEM_SIZE
|
|
#undef CP110_PCIEx_CPU_MEM_BASE
|
|
#undef CP110_PCIEx_BUS_MEM_BASE
|
|
|
|
/* CP110-1 Settings */
|
|
#define CP110_NAME cp1
|
|
#define CP110_NUM 1
|
|
#define CP110_PCIE_MEM_SIZE(iface) (0xf00000)
|
|
#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe2000000 + (iface) * 0x1000000)
|
|
#define CP110_PCIEx_BUS_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
|
|
|
|
#include "armada-cp110.dtsi"
|
|
|
|
/ {
|
|
model = "Marvell CN9131 development board";
|
|
compatible = "marvell,cn9131-db";
|
|
|
|
aliases {
|
|
gpio3 = &cp1_gpio0;
|
|
gpio4 = &cp1_gpio1;
|
|
};
|
|
|
|
cp1 {
|
|
config-space {
|
|
cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cp1_xhci0_vbus_pins>;
|
|
regulator-name = "cp1-xhci0-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <100000>;
|
|
regulator-force-boot-off;
|
|
gpio = <&cp1_gpio0 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
cp1_reg_usb3_current_lim0: cp1_usb3_current_limiter@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-min-microamp = <900000>;
|
|
regulator-max-microamp = <900000>;
|
|
regulator-force-boot-off;
|
|
gpio = <&cp1_gpio0 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
cp1_pcie_reset_pins: cp1-pcie-reset-pins {
|
|
marvell,pins = <0>;
|
|
marvell,function = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cp1_i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cp1_i2c0_pins>;
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* CON40 */
|
|
&cp1_pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cp1_pcie_reset_pins>;
|
|
marvell,reset-gpio = <&cp1_gpio0 0 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
num-lanes = <2>;
|
|
/* non-prefetchable memory */
|
|
ranges = <0x82000000 0 0xe2000000 0 0xe2000000 0 0xf00000>;
|
|
};
|
|
|
|
&cp1_pinctl {
|
|
compatible = "marvell,mvebu-pinctrl",
|
|
"marvell,cp115-standalone-pinctrl";
|
|
bank-name ="cp1-110";
|
|
|
|
/* MPP Bus:
|
|
* [0-12] GPIO
|
|
* [13-16] SPI1
|
|
* [17-27] GPIO (Default)
|
|
* [28] SATA1_PRESENT_ACTIVEn
|
|
* [29-34] GPIO (Default)
|
|
* [35-36] xSMI
|
|
* [37-38] I2C0
|
|
* [39-62] GPIO
|
|
*/
|
|
/* 0 1 2 3 4 5 6 7 8 9 */
|
|
pin-func = < 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
|
|
0x0 0x0 0x0 0x3 0x3 0x3 0x3 0x0 0x0 0x0
|
|
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x9 0x0
|
|
0x0 0x0 0x0 0x0 0x0 0x7 0x7 0x2 0x2 0x0
|
|
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
|
|
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
|
|
0x0 0x0 0x0 >;
|
|
|
|
cp1_i2c0_pins: cp1-i2c-pins-0 {
|
|
marvell,pins = < 37 38 >;
|
|
marvell,function = <2>;
|
|
};
|
|
cp1_spi0_pins: cp1-spi-pins-0 {
|
|
marvell,pins = < 13 14 15 16 >;
|
|
marvell,function = <3>;
|
|
};
|
|
cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
|
|
marvell,pins = <3>;
|
|
marvell,function = <0>;
|
|
};
|
|
};
|
|
|
|
/* CON32 */
|
|
&cp1_sata0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* U24 */
|
|
&cp1_spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cp1_spi0_pins>;
|
|
reg = <0x700680 0x50>, /* control */
|
|
<0x2000000 0x1000000>, /* CS0 */
|
|
<0 0xffffffff>, /* CS1 */
|
|
<0 0xffffffff>, /* CS2 */
|
|
<0 0xffffffff>; /* CS3 */
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
compatible = "jedec,spi-nor", "spi-flash";
|
|
reg = <0x0>;
|
|
/* On-board MUX does not allow higher frequencies */
|
|
spi-max-frequency = <40000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0x0 0x200000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "Filesystem";
|
|
reg = <0x200000 0xe00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* CON58 */
|
|
&cp1_usb3_1 {
|
|
vbus-supply = <&cp1_reg_usb3_vbus0>;
|
|
current-limiter = <&cp1_reg_usb3_current_lim0>;
|
|
vbus-disable-delay = <500>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cp1_utmi1 {
|
|
status = "okay";
|
|
};
|