u-boot/arch/arm/mach-k3/include/mach/j721e_spl.h
Vignesh Raghavendra 7ce6c8ae58 arm: mach-k3: Add HyperFlash boot mode support
HBMC controller on TI K3 SoC provides MMIO access to HyperFlash similar
to legacy Parallel CFI NOR flashes. Therefore alias HyperFlash bootmode
to NOR boot to enable SPL to load next stage using NOR boot flow.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-09-15 18:51:52 +05:30

45 lines
1.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef _ASM_ARCH_J721E_SPL_H_
#define _ASM_ARCH_J721E_SPL_H_
/* With BootMode B = 0 */
#include <linux/bitops.h>
#define BOOT_DEVICE_HYPERFLASH 0x00
#define BOOT_DEVICE_OSPI 0x01
#define BOOT_DEVICE_QSPI 0x02
#define BOOT_DEVICE_SPI 0x03
#define BOOT_DEVICE_ETHERNET 0x04
#define BOOT_DEVICE_I2C 0x06
#define BOOT_DEVICE_UART 0x07
#define BOOT_DEVICE_NOR BOOT_DEVICE_HYPERFLASH
/* With BootMode B = 1 */
#define BOOT_DEVICE_MMC2 0x10
#define BOOT_DEVICE_MMC1 0x11
#define BOOT_DEVICE_DFU 0x12
#define BOOT_DEVICE_UFS 0x13
#define BOOT_DEVIE_GPMC 0x14
#define BOOT_DEVICE_PCIE 0x15
#define BOOT_DEVICE_MMC2_2 0x16
#define BOOT_DEVICE_RAM 0x17
/* Backup boot modes with MCU Only = 0 */
#define BACKUP_BOOT_DEVICE_RAM 0x0
#define BACKUP_BOOT_DEVICE_USB 0x1
#define BACKUP_BOOT_DEVICE_UART 0x3
#define BACKUP_BOOT_DEVICE_ETHERNET 0x4
#define BACKUP_BOOT_DEVICE_MMC2 0x5
#define BACKUP_BOOT_DEVICE_SPI 0x6
#define BACKUP_BOOT_DEVICE_I2C 0x7
#define BOOT_MODE_B_SHIFT 4
#define BOOT_MODE_B_MASK BIT(4)
#define K3_PRIMARY_BOOTMODE 0x0
#define K3_BACKUP_BOOTMODE 0x1
#endif