u-boot/board/MAI/bios_emulator/scitech/makedefs/wc32.mk
wdenk 8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00

353 lines
9.2 KiB
Makefile

#############################################################################
#
# SciTech Multi-platform Graphics Library
#
# ========================================================================
#
# The contents of this file are subject to the SciTech MGL Public
# License Version 1.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.scitechsoft.com/mgl-license.txt
#
# Software distributed under the License is distributed on an
# "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc.
#
# The Initial Developer of the Original Code is SciTech Software, Inc.
# All Rights Reserved.
#
# ========================================================================
#
# Descripton: Generic DMAKE startup makefile definitions file. Assumes
# that the SCITECH environment variable has been set to point
# to where all our stuff is installed. You should not need
# to change anything in this file.
#
# Watcom C++ 10.x 32 bit version. Supports Rational's DOS4GW
# DOS Extender, PMODE/W, Causeway, FlashTek's X32-VM,
# Phar Lap's TNT DOS Extender, 32-bit Windows development and
# 32-bit OS/2 development.
#
#############################################################################
# Include standard startup script definitions
.IMPORT: SCITECH
.INCLUDE: "$(SCITECH)\makedefs\startup.mk"
# Import enivornment variables that we use
.IMPORT .IGNORE : USE_TNT USE_X32 USE_X32VM USE_PMODEW STKCALL USE_CAUSEWAY
.IMPORT .IGNORE : USE_WIN386 USE_OS232 USE_OS2GUI WC_LIBBASE NOOPT DOSSTYLE
.IMPORT .IGNORE : OS2_SHELL USE_CODEVIEW USE_DOS32A USE_QNX4 LEAVE_LINKFILE
# We are compiling for a 32 bit envionment
_32BIT_ := 1
# Setup special environment for QNX 4 (Unix'ish)
.IF $(USE_QNX4)
USE_QNX := 1
L := .a # Libraries
LP := lib # LP - Library file prefix (name of file on disk)
LL := lib # Library link prefix (name of library on link command line)
LE := .a # Library link suffix (extension of library on link command line)
.ENDIF
# Default commands for compiling, assembling linking and archiving
CC := wcc386
CPP := wpp386
CFLAGS := -zq-j-s-fpi87
.IF $(USE_NASM)
AS := nasm
ASFLAGS := -t -f obj -d__FLAT__ -dSTDCALL_MANGLE -iINCLUDE -i$(SCITECH)\INCLUDE
.ELSE
.IF $(USE_TASM32)
AS := tasm32
DLL_TASM := tasm32
.ELIF $(USE_TASMX)
AS := tasmx
DLL_TASM := tasmx
.ELSE
AS := tasm
DLL_TASM := tasm
.ENDIF
ASFLAGS := /t /mx /m /w-res /w-mcp /D__FLAT__ /DSTDCALL_MANGLE /iINCLUDE /i$(SCITECH)\INCLUDE
GAS := gcc
GAS_FLAGS := -D__WATCOMC__ -D__SW_3S -D__SW_S -U__GNUC__ -UDJGPP -U__unix__ -Wall -I. -I$(SCITECH)\include -x assembler-with-cpp
.ENDIF
LD := wlink
LDFLAGS =
.IF $(USE_OS232)
RC := rc
.ELSE
RC := wrc
.ENDIF
.IF $(USE_WIN32)
RCFLAGS := -q /bt=nt
.ELIF $(USE_OS232)
.IF $(USE_OS2GUI)
CFLAGS += -D__OS2_PM__
.ENDIF
.ELSE
RCFLAGS := -q
.ENDIF
LIB := wlib
LIBFLAGS := -q
ILIB := wlib
ILIBFLAGS := -c
INTEL_X86 := 1
# Set the compiler warning level
.IF $(MAX_WARN)
CFLAGS += -w4
.ELSE
CFLAGS += -w1
.ENDIF
# Optionally turn on debugging information (Codeview format)
.IF $(DBG)
.IF $(USE_WIN32)
.IF $(USE_CODEVIEW)
CFLAGS += -d2 -hc
LDFLAGS += D CODEVIEW OPT CVPACK
.ELSE
CFLAGS += -d2
LDFLAGS += D A
.ENDIF
.ELSE
CFLAGS += -d2
LDFLAGS += D A
.ENDIF
LIBFLAGS += -p=768
.IF $(USE_NASM)
ASFLAGS += -F borland -g
.ELSE
.IF $(USE_TASM32)
ASFLAGS += /q # TASM32 fucks up Watcom C++ debug info
.ELIF $(OS2_SHELL)
ASFLAGS += /q # TASM for OS/2 fucks up Watcom C++ debug info
.ELSE
ASFLAGS += /zi
.ENDIF
.ENDIF
.ELSE
.IF $(USE_NASM)
ASFLAGS += -F null
.ELSE
ASFLAGS += /q
.ENDIF
.END
# Optionally turn on optimisations (with or without stack conventions)
.IF $(STKCALL)
.IF $(OPT)
CFLAGS += -onatx-5s-fp5
.ELIF $(OPT_SIZE)
CFLAGS += -onaslmr-5s-fp5
.ELIF $(NOOPT)
CFLAGS += -od-5s
.ELSE
CFLAGS += -3s
.END
.ELSE
.IF $(OPT)
CFLAGS += -onatx-5r-fp5
.ELIF $(OPT_SIZE)
CFLAGS += -onaslmr-5r-fp5
.ELIF $(NOOPT)
CFLAGS += -od-5r
.END
.END
# Optionally turn on direct i387 FPU instructions optimised for Pentium
.IF $(FPU)
CFLAGS += -DFPU387
ASFLAGS += -dFPU387
.END
# Optionally compile a beta release version of a product
.IF $(BETA)
CFLAGS += -DBETA
ASFLAGS += -dBETA
.END
.IF $(USE_TNT) # Use Phar Lap's TNT DOS Extender
CFLAGS += -bt=nt -DTNT
ASFLAGS += -dTNT
LDFLAGS += SYS NT OP STUB=GOTNT.EXE
LIB_OS = DOS32
.ELIF $(USE_X32VM) # Use FlashTek X-32VM DOS extender
CFLAGS += -bt=dos
LDFLAGS += SYS X32RV
DX_CFLAGS += -DX32VM
DX_ASFLAGS += -dX32VM
LIB_OS = DOS32
.ELIF $(USE_X32) # Use FlashTek X-32 DOS extender
CFLAGS += -bt=dos
LDFLAGS += SYS X32R
DX_CFLAGS += -DX32VM
DX_ASFLAGS += -dX32VM
LIB_OS = DOS32
.ELIF $(USE_QNX4) # Build QNX 4 app
CFLAGS += -bt=qnx386
LDFLAGS += SYS QNX386FLAT OP CASEEXACT OP OFFSET=40k OP STACK=32k
CFLAGS += -D__QNX__ -D__UNIX__
ASFLAGS += -d__QNX__ -d__UNIX__
LIB_OS = QNX4
.ELIF $(USE_OS232)
.IF $(BUILD_DLL)
CFLAGS += -bm-bd-bt=os2-sg-DBUILD_DLL
ASFLAGS += -dBUILD_DLL
.ELSE
CFLAGS += -bm-bt=os2-sg
.ENDIF
DX_ASFLAGS += -d__OS2__
LIB_OS = os232
.ELIF $(USE_SNAP) # Build 32 bit Snap app
.IF $(BUILD_DLL)
CFLAGS += -bm-bd-bt=nt-DBUILD_DLL
ASFLAGS += -dBUILD_DLL
.ELSE
CFLAGS += -bm-bt=nt-D_WIN32
.ENDIF
LDFLAGS += OP nodefaultlibs
.IF $(STKCALL)
DEFLIBS := clib3s.lib,math3s.lib,noemu387.lib,
.ELSE
DEFLIBS := clib3r.lib,math3r.lib,noemu387.lib,
.ENDIF
LIB_OS = SNAP
.ELIF $(USE_WIN32) # Build 32 bit Windows NT app
.IF $(WIN32_GUI)
.ELSE
CFLAGS += -D__CONSOLE__
.ENDIF
.IF $(BUILD_DLL)
CFLAGS += -bm-bd-bt=nt-sg-DBUILD_DLL -D_WIN32
ASFLAGS += -dBUILD_DLL
.ELSE
CFLAGS += -bm-bt=nt-sg-D_WIN32
.ENDIF
DX_ASFLAGS += -d__WINDOWS32__
LIB_OS = WIN32
DEFLIBS := kernel32.lib,user32.lib,gdi32.lib,advapi32.lib,shell32.lib,winmm.lib,comdlg32.lib,comctl32.lib,ole32.lib,oleaut32.lib,version.lib,winspool.lib,uuid.lib,wsock32.lib,rpcrt4.lib,
.ELIF $(USE_WIN386) # Build 32 bit Win386 extended app
.IF $(BUILD_DLL)
CFLAGS += -bd-bt=windows-DBUILD_DLL
ASFLAGS += -dBUILD_DLL
.ELSE
CFLAGS += -bt=windows
.ENDIF
DX_ASFLAGS += -d__WIN386__
LIB_OS = WIN386
.ELIF $(USE_PMODEW) # PMODE/W
CFLAGS += -bt=dos
USE_DOS4GW := 1
USE_REALDOS := 1
LDFLAGS += SYS PMODEW
DX_CFLAGS += -DDOS4GW
DX_ASFLAGS += -dDOS4GW
LIB_OS = DOS32
.ELIF $(USE_CAUSEWAY) # Causeway
CFLAGS += -bt=dos
USE_DOS4GW := 1
USE_REALDOS := 1
LDFLAGS += SYS CAUSEWAY
DX_CFLAGS += -DDOS4GW
DX_ASFLAGS += -dDOS4GW
LIB_OS = DOS32
.ELIF $(USE_DOS32A) # DOS32/A
CFLAGS += -bt=dos
USE_DOS4GW := 1
USE_REALDOS := 1
LDFLAGS += SYS DOS32A
DX_CFLAGS += -DDOS4GW
DX_ASFLAGS += -dDOS4GW
LIB_OS = DOS32
.ELSE # Use DOS4GW
CFLAGS += -bt=dos
USE_DOS4GW := 1
USE_REALDOS := 1
LDFLAGS += SYS DOS4G
DX_CFLAGS += -DDOS4GW
DX_ASFLAGS += -dDOS4GW
LIB_OS = DOS32
.END
# Disable linking to default C runtime library and PM library
.IF $(NO_RUNTIME)
LDFLAGS += OP nodefaultlibs
DEFLIBS :=
.ELSE
# Place to look for PM library files
.IF $(USE_SNAP) # Build 32 bit Snap app or dll
PMLIB :=
.ELIF $(USE_WIN32)
.IF $(STKCALL)
PMLIB := spm.lib,
.ELSE
PMLIB := pm.lib,
.ENDIF
.ELIF $(USE_OS232)
.IF $(STKCALL)
.IF $(USE_OS2GUI)
PMLIB := spm_pm.lib,
.ELSE
PMLIB := spm.lib,
.ENDIF
.ELSE
.IF $(USE_OS2GUI)
PMLIB := pm_pm.lib,
.ELSE
PMLIB := pm.lib,
.ENDIF
.ENDIF
.ELIF $(USE_QNX4)
.IF $(STKCALL)
PMLIB := libspm.a,
.ELSE
PMLIB := libpm.a,
.ENDIF
.ELIF $(USE_TNT)
.IF $(STKCALL)
PMLIB := tnt\spm.lib,
.ELSE
PMLIB := tnt\pm.lib,
.ENDIF
.ELIF $(USE_X32)
.IF $(STKCALL)
PMLIB := x32\spm.lib,
.ELSE
PMLIB := x32\pm.lib,
.ENDIF
.ELSE
.IF $(STKCALL)
PMLIB := dos4gw\spm.lib,
.ELSE
PMLIB := dos4gw\pm.lib,
.ENDIF
.ENDIF
.ENDIF
# Define the base directory for library files
.IF $(CHECKED)
LIB_BASE_DIR := $(SCITECH_LIB)\lib\debug
CFLAGS += -DCHECKED=1
.ELSE
LIB_BASE_DIR := $(SCITECH_LIB)\lib\release
.ENDIF
# Define where to install library files
LIB_BASE := $(LIB_BASE_DIR)\$(LIB_OS)\$(WC_LIBBASE)
LIB_DEST := $(LIB_BASE)
LDFLAGS += op map
# Define which file contains our rules
RULES_MAK := wc32.mk