u-boot/drivers/net/sunxi_emac.c
Paul Kocialkowski 487b3277d4 sunxi: GPIO pin mux hardware-feature-specific function index defines
Each hardware feature exposed through the GPIO pin mux is usually using the same
function index (for a given port), so there is no need to define one value per
pin: one value per hardware feature per port is sufficient, avoids duplication
and makes everything easier to understand.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-04-15 16:17:17 +02:00

521 lines
12 KiB
C

/*
* sunxi_emac.c -- Allwinner A10 ethernet driver
*
* (C) Copyright 2012, Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/err.h>
#include <malloc.h>
#include <miiphy.h>
#include <net.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
/* EMAC register */
struct emac_regs {
u32 ctl; /* 0x00 */
u32 tx_mode; /* 0x04 */
u32 tx_flow; /* 0x08 */
u32 tx_ctl0; /* 0x0c */
u32 tx_ctl1; /* 0x10 */
u32 tx_ins; /* 0x14 */
u32 tx_pl0; /* 0x18 */
u32 tx_pl1; /* 0x1c */
u32 tx_sta; /* 0x20 */
u32 tx_io_data; /* 0x24 */
u32 tx_io_data1;/* 0x28 */
u32 tx_tsvl0; /* 0x2c */
u32 tx_tsvh0; /* 0x30 */
u32 tx_tsvl1; /* 0x34 */
u32 tx_tsvh1; /* 0x38 */
u32 rx_ctl; /* 0x3c */
u32 rx_hash0; /* 0x40 */
u32 rx_hash1; /* 0x44 */
u32 rx_sta; /* 0x48 */
u32 rx_io_data; /* 0x4c */
u32 rx_fbc; /* 0x50 */
u32 int_ctl; /* 0x54 */
u32 int_sta; /* 0x58 */
u32 mac_ctl0; /* 0x5c */
u32 mac_ctl1; /* 0x60 */
u32 mac_ipgt; /* 0x64 */
u32 mac_ipgr; /* 0x68 */
u32 mac_clrt; /* 0x6c */
u32 mac_maxf; /* 0x70 */
u32 mac_supp; /* 0x74 */
u32 mac_test; /* 0x78 */
u32 mac_mcfg; /* 0x7c */
u32 mac_mcmd; /* 0x80 */
u32 mac_madr; /* 0x84 */
u32 mac_mwtd; /* 0x88 */
u32 mac_mrdd; /* 0x8c */
u32 mac_mind; /* 0x90 */
u32 mac_ssrr; /* 0x94 */
u32 mac_a0; /* 0x98 */
u32 mac_a1; /* 0x9c */
};
/* SRAMC register */
struct sunxi_sramc_regs {
u32 ctrl0;
u32 ctrl1;
};
/* 0: Disable 1: Aborted frame enable(default) */
#define EMAC_TX_AB_M (0x1 << 0)
/* 0: CPU 1: DMA(default) */
#define EMAC_TX_TM (0x1 << 1)
#define EMAC_TX_SETUP (0)
/* 0: DRQ asserted 1: DRQ automatically(default) */
#define EMAC_RX_DRQ_MODE (0x1 << 1)
/* 0: CPU 1: DMA(default) */
#define EMAC_RX_TM (0x1 << 2)
/* 0: Normal(default) 1: Pass all Frames */
#define EMAC_RX_PA (0x1 << 4)
/* 0: Normal(default) 1: Pass Control Frames */
#define EMAC_RX_PCF (0x1 << 5)
/* 0: Normal(default) 1: Pass Frames with CRC Error */
#define EMAC_RX_PCRCE (0x1 << 6)
/* 0: Normal(default) 1: Pass Frames with Length Error */
#define EMAC_RX_PLE (0x1 << 7)
/* 0: Normal 1: Pass Frames length out of range(default) */
#define EMAC_RX_POR (0x1 << 8)
/* 0: Not accept 1: Accept unicast Packets(default) */
#define EMAC_RX_UCAD (0x1 << 16)
/* 0: Normal(default) 1: DA Filtering */
#define EMAC_RX_DAF (0x1 << 17)
/* 0: Not accept 1: Accept multicast Packets(default) */
#define EMAC_RX_MCO (0x1 << 20)
/* 0: Disable(default) 1: Enable Hash filter */
#define EMAC_RX_MHF (0x1 << 21)
/* 0: Not accept 1: Accept Broadcast Packets(default) */
#define EMAC_RX_BCO (0x1 << 22)
/* 0: Disable(default) 1: Enable SA Filtering */
#define EMAC_RX_SAF (0x1 << 24)
/* 0: Normal(default) 1: Inverse Filtering */
#define EMAC_RX_SAIF (0x1 << 25)
#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
EMAC_RX_MCO | EMAC_RX_BCO)
/* 0: Disable 1: Enable Receive Flow Control(default) */
#define EMAC_MAC_CTL0_RFC (0x1 << 2)
/* 0: Disable 1: Enable Transmit Flow Control(default) */
#define EMAC_MAC_CTL0_TFC (0x1 << 3)
#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
/* 0: Disable 1: Enable MAC Frame Length Checking(default) */
#define EMAC_MAC_CTL1_FLC (0x1 << 1)
/* 0: Disable(default) 1: Enable Huge Frame */
#define EMAC_MAC_CTL1_HF (0x1 << 2)
/* 0: Disable(default) 1: Enable MAC Delayed CRC */
#define EMAC_MAC_CTL1_DCRC (0x1 << 3)
/* 0: Disable 1: Enable MAC CRC(default) */
#define EMAC_MAC_CTL1_CRC (0x1 << 4)
/* 0: Disable 1: Enable MAC PAD Short frames(default) */
#define EMAC_MAC_CTL1_PC (0x1 << 5)
/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */
#define EMAC_MAC_CTL1_VC (0x1 << 6)
/* 0: Disable(default) 1: Enable MAC auto detect Short frames */
#define EMAC_MAC_CTL1_ADP (0x1 << 7)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_PRE (0x1 << 8)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_LPE (0x1 << 9)
/* 0: Disable(default) 1: Enable no back off */
#define EMAC_MAC_CTL1_NB (0x1 << 12)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_BNB (0x1 << 13)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_ED (0x1 << 14)
#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
EMAC_MAC_CTL1_PC)
#define EMAC_MAC_IPGT 0x15
#define EMAC_MAC_NBTB_IPG1 0xc
#define EMAC_MAC_NBTB_IPG2 0x12
#define EMAC_MAC_CW 0x37
#define EMAC_MAC_RM 0xf
#define EMAC_MAC_MFL 0x0600
/* Receive status */
#define EMAC_CRCERR (0x1 << 4)
#define EMAC_LENERR (0x3 << 5)
#define DMA_CPU_TRRESHOLD 2000
struct emac_eth_dev {
u32 speed;
u32 duplex;
u32 phy_configured;
int link_printed;
};
struct emac_rxhdr {
s16 rx_len;
u16 rx_status;
};
static void emac_inblk_32bit(void *reg, void *data, int count)
{
int cnt = (count + 3) >> 2;
if (cnt) {
u32 *buf = data;
do {
u32 x = readl(reg);
*buf++ = x;
} while (--cnt);
}
}
static void emac_outblk_32bit(void *reg, void *data, int count)
{
int cnt = (count + 3) >> 2;
if (cnt) {
const u32 *buf = data;
do {
writel(*buf++, reg);
} while (--cnt);
}
}
/* Read a word from phyxcer */
static int emac_phy_read(const char *devname, unsigned char addr,
unsigned char reg, unsigned short *value)
{
struct eth_device *dev = eth_get_dev_by_name(devname);
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
/* issue the phy address and reg */
writel(addr << 8 | reg, &regs->mac_madr);
/* pull up the phy io line */
writel(0x1, &regs->mac_mcmd);
/* Wait read complete */
mdelay(1);
/* push down the phy io line */
writel(0x0, &regs->mac_mcmd);
/* and write data */
*value = readl(&regs->mac_mrdd);
return 0;
}
/* Write a word to phyxcer */
static int emac_phy_write(const char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
struct eth_device *dev = eth_get_dev_by_name(devname);
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
/* issue the phy address and reg */
writel(addr << 8 | reg, &regs->mac_madr);
/* pull up the phy io line */
writel(0x1, &regs->mac_mcmd);
/* Wait write complete */
mdelay(1);
/* push down the phy io line */
writel(0x0, &regs->mac_mcmd);
/* and write data */
writel(value, &regs->mac_mwtd);
return 0;
}
static void emac_setup(struct eth_device *dev)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
u32 reg_val;
u16 phy_val;
u32 duplex_flag;
/* Set up TX */
writel(EMAC_TX_SETUP, &regs->tx_mode);
/* Set up RX */
writel(EMAC_RX_SETUP, &regs->rx_ctl);
/* Set MAC */
/* Set MAC CTL0 */
writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
/* Set MAC CTL1 */
emac_phy_read(dev->name, 1, 0, &phy_val);
debug("PHY SETUP, reg 0 value: %x\n", phy_val);
duplex_flag = !!(phy_val & (1 << 8));
reg_val = 0;
if (duplex_flag)
reg_val = (0x1 << 0);
writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
/* Set up IPGT */
writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
/* Set up IPGR */
writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
/* Set up Collison window */
writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
/* Set up Max Frame Length */
writel(EMAC_MAC_MFL, &regs->mac_maxf);
}
static void emac_reset(struct eth_device *dev)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
debug("resetting device\n");
/* RESET device */
writel(0, &regs->ctl);
udelay(200);
writel(1, &regs->ctl);
udelay(200);
}
static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_eth_dev *priv = dev->priv;
u16 phy_reg;
/* Init EMAC */
/* Flush RX FIFO */
setbits_le32(&regs->rx_ctl, 0x8);
udelay(1);
/* Init MAC */
/* Soft reset MAC */
clrbits_le32(&regs->mac_ctl0, 0x1 << 15);
/* Clear RX counter */
writel(0x0, &regs->rx_fbc);
udelay(1);
/* Set up EMAC */
emac_setup(dev);
writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
dev->enetaddr[2], &regs->mac_a1);
writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
dev->enetaddr[5], &regs->mac_a0);
mdelay(1);
emac_reset(dev);
/* PHY POWER UP */
emac_phy_read(dev->name, 1, 0, &phy_reg);
emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
mdelay(1);
emac_phy_read(dev->name, 1, 0, &phy_reg);
priv->speed = miiphy_speed(dev->name, 0);
priv->duplex = miiphy_duplex(dev->name, 0);
/* Print link status only once */
if (!priv->link_printed) {
printf("ENET Speed is %d Mbps - %s duplex connection\n",
priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
priv->link_printed = 1;
}
/* Set EMAC SPEED depend on PHY */
clrsetbits_le32(&regs->mac_supp, 1 << 8,
((phy_reg & (0x1 << 13)) >> 13) << 8);
/* Set duplex depend on phy */
clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
((phy_reg & (0x1 << 8)) >> 8) << 0);
/* Enable RX/TX */
setbits_le32(&regs->ctl, 0x7);
return 0;
}
static void sunxi_emac_eth_halt(struct eth_device *dev)
{
/* Nothing to do here */
}
static int sunxi_emac_eth_recv(struct eth_device *dev)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_rxhdr rxhdr;
u32 rxcount;
u32 reg_val;
int rx_len;
int rx_status;
int good_packet;
/* Check packet ready or not */
/* Race warning: The first packet might arrive with
* the interrupts disabled, but the second will fix
*/
rxcount = readl(&regs->rx_fbc);
if (!rxcount) {
/* Had one stuck? */
rxcount = readl(&regs->rx_fbc);
if (!rxcount)
return 0;
}
reg_val = readl(&regs->rx_io_data);
if (reg_val != 0x0143414d) {
/* Disable RX */
clrbits_le32(&regs->ctl, 0x1 << 2);
/* Flush RX FIFO */
setbits_le32(&regs->rx_ctl, 0x1 << 3);
while (readl(&regs->rx_ctl) & (0x1 << 3))
;
/* Enable RX */
setbits_le32(&regs->ctl, 0x1 << 2);
return 0;
}
/* A packet ready now
* Get status/length
*/
good_packet = 1;
emac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
rx_len = rxhdr.rx_len;
rx_status = rxhdr.rx_status;
/* Packet Status check */
if (rx_len < 0x40) {
good_packet = 0;
debug("RX: Bad Packet (runt)\n");
}
/* rx_status is identical to RSR register. */
if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
good_packet = 0;
if (rx_status & EMAC_CRCERR)
printf("crc error\n");
if (rx_status & EMAC_LENERR)
printf("length error\n");
}
/* Move data from EMAC */
if (good_packet) {
if (rx_len > DMA_CPU_TRRESHOLD) {
printf("Received packet is too big (len=%d)\n", rx_len);
} else {
emac_inblk_32bit((void *)&regs->rx_io_data,
NetRxPackets[0], rx_len);
/* Pass to upper layer */
NetReceive(NetRxPackets[0], rx_len);
return rx_len;
}
}
return 0;
}
static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
/* Select channel 0 */
writel(0, &regs->tx_ins);
/* Write packet */
emac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
/* Set TX len */
writel(len, &regs->tx_pl0);
/* Start translate from fifo to phy */
setbits_le32(&regs->tx_ctl0, 1);
return 0;
}
int sunxi_emac_initialize(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_sramc_regs *sram =
(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
struct emac_regs *regs =
(struct emac_regs *)SUNXI_EMAC_BASE;
struct eth_device *dev;
struct emac_eth_dev *priv;
int pin;
dev = malloc(sizeof(*dev));
if (dev == NULL)
return -ENOMEM;
priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
if (!priv) {
free(dev);
return -ENOMEM;
}
memset(dev, 0, sizeof(*dev));
memset(priv, 0, sizeof(struct emac_eth_dev));
/* Map SRAM to EMAC */
setbits_le32(&sram->ctrl1, 0x5 << 2);
/* Configure pin mux settings for MII Ethernet */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
/* Set up clock gating */
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
/* Set MII clock */
clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
dev->iobase = (int)regs;
dev->priv = priv;
dev->init = sunxi_emac_eth_init;
dev->halt = sunxi_emac_eth_halt;
dev->send = sunxi_emac_eth_send;
dev->recv = sunxi_emac_eth_recv;
strcpy(dev->name, "emac");
eth_register(dev);
miiphy_register(dev->name, emac_phy_read, emac_phy_write);
return 0;
}