mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
18ba012b9b
edb93xx: Fix SDRAM initialization by issuing a precharge all command before forcing the precharge and select mode register update mode before programming the mode registers. Write to the SDRAM banks in order to force a precharge, reading causes the edb93xx boards to hang Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
146 lines
3.8 KiB
C
146 lines
3.8 KiB
C
/*
|
|
* Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
|
|
*
|
|
* Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include "sdram_cfg.h"
|
|
#include "early_udelay.h"
|
|
|
|
#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \
|
|
(SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
|
|
|
|
#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
|
|
(SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0
|
|
|
|
static void precharge_all_banks(void);
|
|
static void setup_refresh_timer(void);
|
|
static void program_mode_registers(void);
|
|
|
|
void sdram_cfg(void)
|
|
{
|
|
struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
|
|
|
|
writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
|
|
|
|
/* Issue continous NOP commands */
|
|
writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
|
|
|
|
early_udelay(200);
|
|
|
|
precharge_all_banks();
|
|
|
|
setup_refresh_timer();
|
|
|
|
program_mode_registers();
|
|
|
|
/* Select normal operation mode */
|
|
writel(GLCONFIG_CKE, &sdram->glconfig);
|
|
}
|
|
|
|
static void precharge_all_banks(void)
|
|
{
|
|
struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
|
|
|
|
/* Issue PRECHARGE ALL commands */
|
|
writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig);
|
|
|
|
/*
|
|
* Errata of most EP93xx revisions say that PRECHARGE ALL isn't always
|
|
* issued
|
|
*
|
|
* Cirrus proposes a workaround which consists in performing a read from
|
|
* each bank to force the precharge. This causes some boards to hang.
|
|
* Writing to the SDRAM banks instead of reading has the same
|
|
* side-effect (the SDRAM controller issues the necessary precharges),
|
|
* but is known to work on all supported boards
|
|
*/
|
|
|
|
PRECHARGE_BANK(0);
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS >= 2)
|
|
PRECHARGE_BANK(1);
|
|
#endif
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS >= 3)
|
|
PRECHARGE_BANK(2);
|
|
#endif
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS == 4)
|
|
PRECHARGE_BANK(3);
|
|
#endif
|
|
}
|
|
|
|
static void setup_refresh_timer(void)
|
|
{
|
|
struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
|
|
|
|
/* Load refresh timer with 10 to issue refresh every 10 cycles */
|
|
writel(0x0a, &sdram->refrshtimr);
|
|
|
|
/*
|
|
* Wait at least 80 clock cycles to provide 8 refresh cycles
|
|
* to all SDRAMs
|
|
*/
|
|
early_udelay(1);
|
|
|
|
/*
|
|
* Program refresh timer with normal value
|
|
* We need 8192 refresh cycles every 64ms
|
|
* at 15ns (HCLK >= 66MHz) per cycle:
|
|
* 64ms / 8192 = 7.8125us
|
|
* 7.8125us / 15ns = 520 (0x208)
|
|
*/
|
|
/*
|
|
* TODO: redboot uses 0x1e0 for the slowest possible device
|
|
* but i don't understand how this value is calculated
|
|
*/
|
|
writel(0x208, &sdram->refrshtimr);
|
|
}
|
|
|
|
static void program_mode_registers(void)
|
|
{
|
|
struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
|
|
|
|
/* Select mode register update mode */
|
|
writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
|
|
|
|
/*
|
|
* The mode registers are programmed by performing a read from each
|
|
* SDRAM bank. The value of the address that is read defines the value
|
|
* that is written into the mode register
|
|
*/
|
|
|
|
PROGRAM_MODE_REG(0);
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS >= 2)
|
|
PROGRAM_MODE_REG(1);
|
|
#endif
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS >= 3)
|
|
PROGRAM_MODE_REG(2);
|
|
#endif
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS == 4)
|
|
PROGRAM_MODE_REG(3);
|
|
#endif
|
|
}
|