u-boot/arch/mips/dts/brcm,bcm6358.dtsi
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

194 lines
3.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
*/
#include <dt-bindings/clock/bcm6358-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/bcm6358-reset.h>
#include "skeleton.dtsi"
/ {
compatible = "brcm,bcm6358";
aliases {
spi0 = &spi;
};
cpus {
reg = <0xfffe0000 0x4>;
#address-cells = <1>;
#size-cells = <0>;
u-boot,dm-pre-reloc;
cpu@0 {
compatible = "brcm,bcm6358-cpu", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
u-boot,dm-pre-reloc;
};
cpu@1 {
compatible = "brcm,bcm6358-cpu", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
u-boot,dm-pre-reloc;
};
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
periph_osc: periph-osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
u-boot,dm-pre-reloc;
};
periph_clk: periph-clk {
compatible = "brcm,bcm6345-clk";
reg = <0xfffe0004 0x4>;
#clock-cells = <1>;
};
};
pflash: nor@1e000000 {
compatible = "cfi-flash";
reg = <0x1e000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
ubus {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
pll_cntl: syscon@fffe0008 {
compatible = "syscon";
reg = <0xfffe0008 0x4>;
};
syscon-reboot {
compatible = "syscon-reboot";
regmap = <&pll_cntl>;
offset = <0x0>;
mask = <0x1>;
};
periph_rst: reset-controller@fffe0034 {
compatible = "brcm,bcm6345-reset";
reg = <0xfffe0034 0x4>;
#reset-cells = <1>;
};
wdt: watchdog@fffe005c {
compatible = "brcm,bcm6345-wdt";
reg = <0xfffe005c 0xc>;
clocks = <&periph_osc>;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdt>;
};
gpio1: gpio-controller@fffe0080 {
compatible = "brcm,bcm6345-gpio";
reg = <0xfffe0080 0x4>, <0xfffe0088 0x4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
status = "disabled";
};
gpio0: gpio-controller@fffe0084 {
compatible = "brcm,bcm6345-gpio";
reg = <0xfffe0084 0x4>, <0xfffe008c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
leds: led-controller@fffe00d0 {
compatible = "brcm,bcm6358-leds";
reg = <0xfffe00d0 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart0: serial@fffe0100 {
compatible = "brcm,bcm6345-uart";
reg = <0xfffe0100 0x18>;
clocks = <&periph_osc>;
status = "disabled";
};
uart1: serial@fffe0120 {
compatible = "brcm,bcm6345-uart";
reg = <0xfffe0120 0x18>;
clocks = <&periph_osc>;
status = "disabled";
};
spi: spi@fffe0800 {
compatible = "brcm,bcm6358-spi";
reg = <0xfffe0800 0x70c>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&periph_clk BCM6358_CLK_SPI>;
resets = <&periph_rst BCM6358_RST_SPI>;
spi-max-frequency = <20000000>;
num-cs = <4>;
status = "disabled";
};
memory-controller@fffe1200 {
compatible = "brcm,bcm6358-mc";
reg = <0xfffe1200 0x4c>;
u-boot,dm-pre-reloc;
};
ehci: usb-controller@fffe1300 {
compatible = "brcm,bcm6358-ehci", "generic-ehci";
reg = <0xfffe1300 0x100>;
phys = <&usbh>;
big-endian;
status = "disabled";
};
ohci: usb-controller@fffe1400 {
compatible = "brcm,bcm6358-ohci", "generic-ohci";
reg = <0xfffe1400 0x100>;
phys = <&usbh>;
big-endian;
status = "disabled";
};
usbh: usb-phy@fffe1500 {
compatible = "brcm,bcm6358-usbh";
reg = <0xfffe1500 0x28>;
#phy-cells = <0>;
resets = <&periph_rst BCM6358_RST_USBH>;
status = "disabled";
};
};
};