mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
c970e8954f
When we clear a pmic_bus bit, we do a read-modify-write operation. We waste some time however, by writing back the exact samea value that was already set in the chip. Let us thus only do the write in case data was changed. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
125 lines
2.8 KiB
C
125 lines
2.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Sunxi PMIC bus access helpers
|
|
*
|
|
* The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
|
|
* axp223 uses the rsb bus, these functions abstract this.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/p2wi.h>
|
|
#include <asm/arch/rsb.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/pmic_bus.h>
|
|
|
|
#define AXP152_I2C_ADDR 0x30
|
|
|
|
#define AXP209_I2C_ADDR 0x34
|
|
|
|
#define AXP221_CHIP_ADDR 0x68
|
|
#define AXP221_CTRL_ADDR 0x3e
|
|
#define AXP221_INIT_DATA 0x3e
|
|
|
|
/* AXP818 device and runtime addresses are same as AXP223 */
|
|
#define AXP223_DEVICE_ADDR 0x3a3
|
|
#define AXP223_RUNTIME_ADDR 0x2d
|
|
|
|
int pmic_bus_init(void)
|
|
{
|
|
/* This cannot be 0 because it is used in SPL before BSS is ready */
|
|
static int needs_init = 1;
|
|
__maybe_unused int ret;
|
|
|
|
if (!needs_init)
|
|
return 0;
|
|
|
|
#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
|
|
# ifdef CONFIG_MACH_SUN6I
|
|
p2wi_init();
|
|
ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
|
|
AXP221_INIT_DATA);
|
|
# elif defined CONFIG_MACH_SUN8I_R40
|
|
/* Nothing. R40 uses the AXP221s in I2C mode */
|
|
ret = 0;
|
|
# else
|
|
ret = rsb_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
|
|
# endif
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
needs_init = 0;
|
|
return 0;
|
|
}
|
|
|
|
int pmic_bus_read(u8 reg, u8 *data)
|
|
{
|
|
#ifdef CONFIG_AXP152_POWER
|
|
return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
|
|
#elif defined CONFIG_AXP209_POWER
|
|
return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
|
|
#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
|
|
# ifdef CONFIG_MACH_SUN6I
|
|
return p2wi_read(reg, data);
|
|
# elif defined CONFIG_MACH_SUN8I_R40
|
|
return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
|
|
# else
|
|
return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
|
|
# endif
|
|
#endif
|
|
}
|
|
|
|
int pmic_bus_write(u8 reg, u8 data)
|
|
{
|
|
#ifdef CONFIG_AXP152_POWER
|
|
return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
|
|
#elif defined CONFIG_AXP209_POWER
|
|
return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
|
|
#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
|
|
# ifdef CONFIG_MACH_SUN6I
|
|
return p2wi_write(reg, data);
|
|
# elif defined CONFIG_MACH_SUN8I_R40
|
|
return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
|
|
# else
|
|
return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
|
|
# endif
|
|
#endif
|
|
}
|
|
|
|
int pmic_bus_setbits(u8 reg, u8 bits)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = pmic_bus_read(reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((val & bits) == bits)
|
|
return 0;
|
|
|
|
val |= bits;
|
|
return pmic_bus_write(reg, val);
|
|
}
|
|
|
|
int pmic_bus_clrbits(u8 reg, u8 bits)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = pmic_bus_read(reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val & bits))
|
|
return 0;
|
|
|
|
val &= ~bits;
|
|
return pmic_bus_write(reg, val);
|
|
}
|