mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
8c1b717218
Add 32bpp framebuffer support for the Atmel HLCDC driver. This is needed for output bpp higher than 16bpp. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
220 lines
6 KiB
C
220 lines
6 KiB
C
/*
|
|
* Driver for AT91/AT32 MULTI LAYER LCD Controller
|
|
*
|
|
* Copyright (C) 2012 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <lcd.h>
|
|
#include <atmel_hlcdc.h>
|
|
|
|
#if defined(CONFIG_LCD_LOGO)
|
|
#include <bmp_logo.h>
|
|
#endif
|
|
|
|
/* configurable parameters */
|
|
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
|
|
#define ATMEL_LCDC_DMA_BURST_LEN 8
|
|
#ifndef ATMEL_LCDC_GUARD_TIME
|
|
#define ATMEL_LCDC_GUARD_TIME 1
|
|
#endif
|
|
|
|
#define ATMEL_LCDC_FIFO_SIZE 512
|
|
|
|
#define lcdc_readl(reg) __raw_readl((reg))
|
|
#define lcdc_writel(reg, val) __raw_writel((val), (reg))
|
|
|
|
/*
|
|
* the CLUT register map as following
|
|
* RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
|
|
*/
|
|
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
|
|
{
|
|
lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk)
|
|
| ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk)
|
|
| ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk),
|
|
panel_info.mmio + ATMEL_LCDC_LUT(regno));
|
|
}
|
|
|
|
ushort *configuration_get_cmap(void)
|
|
{
|
|
#if defined(CONFIG_LCD_LOGO)
|
|
return bmp_logo_palette;
|
|
#else
|
|
return NULL;
|
|
#endif
|
|
}
|
|
|
|
void lcd_ctrl_init(void *lcdbase)
|
|
{
|
|
unsigned long value;
|
|
struct lcd_dma_desc *desc;
|
|
struct atmel_hlcd_regs *regs;
|
|
|
|
if (!has_lcdc())
|
|
return; /* No lcdc */
|
|
|
|
regs = (struct atmel_hlcd_regs *)panel_info.mmio;
|
|
|
|
/* Disable DISP signal */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
|
|
udelay(1);
|
|
/* Disable synchronization */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
|
|
udelay(1);
|
|
/* Disable pixel clock */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
|
|
udelay(1);
|
|
/* Disable PWM */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
|
|
udelay(1);
|
|
|
|
/* Set pixel clock */
|
|
value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
|
|
if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
|
|
value++;
|
|
|
|
if (value < 1) {
|
|
/* Using system clock as pixel clock */
|
|
lcdc_writel(®s->lcdc_lcdcfg0,
|
|
LCDC_LCDCFG0_CLKDIV(0)
|
|
| LCDC_LCDCFG0_CGDISHCR
|
|
| LCDC_LCDCFG0_CGDISHEO
|
|
| LCDC_LCDCFG0_CGDISOVR1
|
|
| LCDC_LCDCFG0_CGDISBASE
|
|
| panel_info.vl_clk_pol
|
|
| LCDC_LCDCFG0_CLKSEL);
|
|
|
|
} else {
|
|
lcdc_writel(®s->lcdc_lcdcfg0,
|
|
LCDC_LCDCFG0_CLKDIV(value - 2)
|
|
| LCDC_LCDCFG0_CGDISHCR
|
|
| LCDC_LCDCFG0_CGDISHEO
|
|
| LCDC_LCDCFG0_CGDISOVR1
|
|
| LCDC_LCDCFG0_CGDISBASE
|
|
| panel_info.vl_clk_pol);
|
|
}
|
|
|
|
/* Initialize control register 5 */
|
|
value = 0;
|
|
|
|
value |= panel_info.vl_sync;
|
|
|
|
#ifndef LCD_OUTPUT_BPP
|
|
/* Output is 24bpp */
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
|
|
#else
|
|
switch (LCD_OUTPUT_BPP) {
|
|
case 12:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
|
|
break;
|
|
case 16:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
|
|
break;
|
|
case 18:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
|
|
break;
|
|
case 24:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME);
|
|
value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
|
|
lcdc_writel(®s->lcdc_lcdcfg5, value);
|
|
|
|
/* Vertical & Horizontal Timing */
|
|
value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1);
|
|
value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg1, value);
|
|
|
|
value = LCDC_LCDCFG2_VBPW(panel_info.vl_upper_margin);
|
|
value |= LCDC_LCDCFG2_VFPW(panel_info.vl_lower_margin - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg2, value);
|
|
|
|
value = LCDC_LCDCFG3_HBPW(panel_info.vl_left_margin - 1);
|
|
value |= LCDC_LCDCFG3_HFPW(panel_info.vl_right_margin - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg3, value);
|
|
|
|
/* Display size */
|
|
value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1);
|
|
value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg4, value);
|
|
|
|
lcdc_writel(®s->lcdc_basecfg0,
|
|
LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
|
|
|
|
switch (NBITS(panel_info.vl_bpix)) {
|
|
case 16:
|
|
lcdc_writel(®s->lcdc_basecfg1,
|
|
LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
|
|
break;
|
|
case 32:
|
|
lcdc_writel(®s->lcdc_basecfg1,
|
|
LCDC_BASECFG1_RGBMODE_24BPP_RGB_888);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
lcdc_writel(®s->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
|
|
lcdc_writel(®s->lcdc_basecfg3, 0);
|
|
lcdc_writel(®s->lcdc_basecfg4, LCDC_BASECFG4_DMA);
|
|
|
|
/* Disable all interrupts */
|
|
lcdc_writel(®s->lcdc_lcdidr, ~0UL);
|
|
lcdc_writel(®s->lcdc_baseidr, ~0UL);
|
|
|
|
/* Setup the DMA descriptor, this descriptor will loop to itself */
|
|
desc = (struct lcd_dma_desc *)(lcdbase - 16);
|
|
|
|
desc->address = (u32)lcdbase;
|
|
/* Disable DMA transfer interrupt & descriptor loaded interrupt. */
|
|
desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
|
|
| LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
|
|
desc->next = (u32)desc;
|
|
|
|
/* Flush the DMA descriptor if we enabled dcache */
|
|
flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc));
|
|
|
|
lcdc_writel(®s->lcdc_baseaddr, desc->address);
|
|
lcdc_writel(®s->lcdc_basectrl, desc->control);
|
|
lcdc_writel(®s->lcdc_basenext, desc->next);
|
|
lcdc_writel(®s->lcdc_basecher, LCDC_BASECHER_CHEN |
|
|
LCDC_BASECHER_UPDATEEN);
|
|
|
|
/* Enable LCD */
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
|
|
udelay(1);
|
|
|
|
/* Enable flushing if we enabled dcache */
|
|
lcd_set_flush_dcache(1);
|
|
}
|