mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
240ece49c7
Update README to use 4.19.35_1.1.0 released firmware images. Signed-off-by: Peng Fan <peng.fan@nxp.com> |
||
|---|---|---|
| .. | ||
| imx8qxp_mek.c | ||
| imximage.cfg | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
| uboot-container.cfg | ||
U-Boot for the NXP i.MX8QXP EVK board Quick Start =========== - Build the ARM Trusted firmware binary - Get scfw_tcm.bin and ahab-container.img - Build U-Boot - Flash the binary into the SD card - Boot Get and Build the ARM Trusted firmware ====================================== $ git clone https://source.codeaurora.org/external/imx/imx-atf $ cd imx-atf/ $ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0 $ make PLAT=imx8qx bl31 Get scfw_tcm.bin and ahab-container.img ============================== $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin $ chmod +x imx-sc-firmware-1.2.7.1.bin $ ./imx-sc-firmware-1.2.7.1.bin $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin $ chmod +x imx-seco-2.3.1.bin $ ./imx-seco-2.3.1.bin Copy the following binaries to U-Boot folder: $ cp imx-atf/build/imx8qx/release/bl31.bin . $ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img $ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin . Build U-Boot ============ $ make imx8qxp_mek_defconfig $ make flash.bin Flash the binary into the SD card ================================= Burn the flash.bin binary to SD card offset 32KB: $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 Boot ==== Set Boot switch SW2: 1100.