u-boot/drivers/ddr/imx/phy/helper.c
Peng Fan 23387416da ddr: imx8m: helper: load ddr firmware according to binman symbols
By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after
we update the binman dtsi to drop 0x8000/0x4000 length for the firmware.

And that could save binary size for many KBs.

Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Alper: Check BINMAN_SYMS_OK instead]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26 11:29:02 +02:00

220 lines
6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*/
#include <common.h>
#include <binman_sym.h>
#include <log.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/ddr.h>
#include <asm/sections.h>
DECLARE_GLOBAL_DATA_PTR;
#define IMEM_LEN 32768 /* byte */
#define DMEM_LEN 16384 /* byte */
#define IMEM_2D_OFFSET 49152
#define IMEM_OFFSET_ADDR 0x00050000
#define DMEM_OFFSET_ADDR 0x00054000
#define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
binman_sym_declare(ulong, ddr_1d_imem_fw, image_pos);
binman_sym_declare(ulong, ddr_1d_imem_fw, size);
binman_sym_declare(ulong, ddr_1d_dmem_fw, image_pos);
binman_sym_declare(ulong, ddr_1d_dmem_fw, size);
#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
binman_sym_declare(ulong, ddr_2d_imem_fw, image_pos);
binman_sym_declare(ulong, ddr_2d_imem_fw, size);
binman_sym_declare(ulong, ddr_2d_dmem_fw, image_pos);
binman_sym_declare(ulong, ddr_2d_dmem_fw, size);
#endif
/* We need PHY iMEM PHY is 32KB padded */
void ddr_load_train_firmware(enum fw_type type)
{
u32 tmp32, i;
u32 error = 0;
unsigned long pr_to32, pr_from32;
uint32_t fw_offset = type ? IMEM_2D_OFFSET : 0;
unsigned long imem_start = (unsigned long)&_end + fw_offset;
unsigned long dmem_start;
unsigned long imem_len = IMEM_LEN, dmem_len = DMEM_LEN;
#ifdef CONFIG_SPL_OF_CONTROL
if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) {
imem_start = roundup((unsigned long)&_end +
fdt_totalsize(gd->fdt_blob), 4) +
fw_offset;
}
#endif
dmem_start = imem_start + imem_len;
if (BINMAN_SYMS_OK) {
switch (type) {
case FW_1D_IMAGE:
imem_start = binman_sym(ulong, ddr_1d_imem_fw, image_pos);
imem_len = binman_sym(ulong, ddr_1d_imem_fw, size);
dmem_start = binman_sym(ulong, ddr_1d_dmem_fw, image_pos);
dmem_len = binman_sym(ulong, ddr_1d_dmem_fw, size);
break;
case FW_2D_IMAGE:
#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
imem_start = binman_sym(ulong, ddr_2d_imem_fw, image_pos);
imem_len = binman_sym(ulong, ddr_2d_imem_fw, size);
dmem_start = binman_sym(ulong, ddr_2d_dmem_fw, image_pos);
dmem_len = binman_sym(ulong, ddr_2d_dmem_fw, size);
#endif
break;
}
}
pr_from32 = imem_start;
pr_to32 = IMEM_OFFSET_ADDR;
for (i = 0x0; i < imem_len; ) {
tmp32 = readl(pr_from32);
writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
pr_to32 += 1;
writew((tmp32 >> 16) & 0x0000ffff,
DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
pr_to32 += 1;
pr_from32 += 4;
i += 4;
}
pr_from32 = dmem_start;
pr_to32 = DMEM_OFFSET_ADDR;
for (i = 0x0; i < dmem_len; ) {
tmp32 = readl(pr_from32);
writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
pr_to32 += 1;
writew((tmp32 >> 16) & 0x0000ffff,
DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
pr_to32 += 1;
pr_from32 += 4;
i += 4;
}
debug("check ddr_pmu_train_imem code\n");
pr_from32 = imem_start;
pr_to32 = IMEM_OFFSET_ADDR;
for (i = 0x0; i < imem_len; ) {
tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff);
pr_to32 += 1;
tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR +
ddrphy_addr_remap(pr_to32)) & 0x0000ffff) << 16);
if (tmp32 != readl(pr_from32)) {
debug("%lx %lx\n", pr_from32, pr_to32);
error++;
}
pr_from32 += 4;
pr_to32 += 1;
i += 4;
}
if (error)
printf("check ddr_pmu_train_imem code fail=%d\n", error);
else
debug("check ddr_pmu_train_imem code pass\n");
debug("check ddr4_pmu_train_dmem code\n");
pr_from32 = dmem_start;
pr_to32 = DMEM_OFFSET_ADDR;
for (i = 0x0; i < dmem_len;) {
tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff);
pr_to32 += 1;
tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR +
ddrphy_addr_remap(pr_to32)) & 0x0000ffff) << 16);
if (tmp32 != readl(pr_from32)) {
debug("%lx %lx\n", pr_from32, pr_to32);
error++;
}
pr_from32 += 4;
pr_to32 += 1;
i += 4;
}
if (error)
printf("check ddr_pmu_train_dmem code fail=%d", error);
else
debug("check ddr_pmu_train_dmem code pass\n");
}
void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr,
unsigned int num)
{
int i = 0;
/* enable the ddrphy apb */
dwc_ddrphy_apb_wr(0xd0000, 0x0);
dwc_ddrphy_apb_wr(0xc0080, 0x3);
for (i = 0; i < num; i++) {
ddrphy_csr->val = dwc_ddrphy_apb_rd(ddrphy_csr->reg);
ddrphy_csr++;
}
/* disable the ddrphy apb */
dwc_ddrphy_apb_wr(0xc0080, 0x2);
dwc_ddrphy_apb_wr(0xd0000, 0x1);
}
void dram_config_save(struct dram_timing_info *timing_info,
unsigned long saved_timing_base)
{
int i = 0;
struct dram_timing_info *saved_timing = (struct dram_timing_info *)saved_timing_base;
struct dram_cfg_param *cfg;
saved_timing->ddrc_cfg_num = timing_info->ddrc_cfg_num;
saved_timing->ddrphy_cfg_num = timing_info->ddrphy_cfg_num;
saved_timing->ddrphy_trained_csr_num = ddrphy_trained_csr_num;
saved_timing->ddrphy_pie_num = timing_info->ddrphy_pie_num;
/* save the fsp table */
for (i = 0; i < 4; i++)
saved_timing->fsp_table[i] = timing_info->fsp_table[i];
cfg = (struct dram_cfg_param *)(saved_timing_base +
sizeof(*timing_info));
/* save ddrc config */
saved_timing->ddrc_cfg = cfg;
for (i = 0; i < timing_info->ddrc_cfg_num; i++) {
cfg->reg = timing_info->ddrc_cfg[i].reg;
cfg->val = timing_info->ddrc_cfg[i].val;
cfg++;
}
/* save ddrphy config */
saved_timing->ddrphy_cfg = cfg;
for (i = 0; i < timing_info->ddrphy_cfg_num; i++) {
cfg->reg = timing_info->ddrphy_cfg[i].reg;
cfg->val = timing_info->ddrphy_cfg[i].val;
cfg++;
}
/* save the ddrphy csr */
saved_timing->ddrphy_trained_csr = cfg;
for (i = 0; i < ddrphy_trained_csr_num; i++) {
cfg->reg = ddrphy_trained_csr[i].reg;
cfg->val = ddrphy_trained_csr[i].val;
cfg++;
}
/* save the ddrphy pie */
saved_timing->ddrphy_pie = cfg;
for (i = 0; i < timing_info->ddrphy_pie_num; i++) {
cfg->reg = timing_info->ddrphy_pie[i].reg;
cfg->val = timing_info->ddrphy_pie[i].val;
cfg++;
}
}