mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
4549e789c1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| fit_spl_atf.its | ||
| Kconfig | ||
| lion_rk3368.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Here is the step-by-step to boot to U-Boot on RK3368-uQ7 Get the Source and build ATF ============================ > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git > cd arm-trusted-firmware > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin Configure U-Boot ================ > cd ../u-boot > make lion-rk3368_defconfig Build the TPL/SPL stage ======================= > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm > tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img > cat spl/u-boot-spl-dtb.bin >> spl-3368.img Build the full U-Boot and a FIT image including the ATF ======================================================= > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb Flash the image =============== Copy the SPL to offset 32k and the FIT image containing the payloads (U-Boot proper, ATF, devicetree) to offset 256k card. SD-Card ------- > dd if=spl-3368.img of=/dev/sdb seek=64 > dd if=u-boot.itb of=/dev/sdb seek=512 eMMC ---- rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with help of the Rockchip loader binary. > git clone https://github.com/rockchip-linux/rkdeveloptool > cd rkdeveloptool > autoreconf -i && && ./configure && make > git clone https://github.com/rockchip-linux/rkbin.git > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin > ./rkdeveloptool wl 64 ../spl.img > ./rkdeveloptool wl 512 ../u-boot.itb If everything went according to plan, you should see the following output on UART0: <debug_uart> U-Boot TPL board init Trying to boot from BOOTROM Returning to boot ROM... Trying to boot from MMC1 NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 NOTICE: BL31: Built : 18:04:47, Jul 5 2017 U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) Model: Theobroma Systems RK3368-uQ7 SoM DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 Using default environment In: serial@ff180000 Out: serial@ff180000 Err: serial@ff180000 Net: Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e eth0: ethernet@ff290000 Hit any key to stop autoboot: 2