u-boot/arch/arm
Patrice Chotard 20fe38e75a clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
Move SYSCFG clock setup into configure_clocks() instead of calling
clock_setup() from board file.

As this clock is only needed in case of ethernet enabled and as
both stm32f4 and stm32f7 are using the Designware ethernet IP,
we use CONFIG_ETH_DESIGNWARE to only enable this clock if needed.

Move the RMII setup from board_early_init_f() to board_init()
to insure that RMII bit is set only when clock driver is initialized.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28 09:39:15 -05:00
..
cpu common: board_f: vid: Add VID specific API to adjust core voltage 2018-01-23 11:20:46 -08:00
dts ARM: dts: stm32: Add STMMAC clocks for stm32f746 2018-01-28 09:39:15 -05:00
include clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks() 2018-01-28 09:39:15 -05:00
lib arm: bootm-fdt.c: fix compiler warning 2018-01-28 09:39:05 -05:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 board: laird: add WB50N CPU module 2017-11-29 22:36:59 -05:00
mach-bcm283x add support for Raspberry Pi Zero W 2017-12-04 09:59:02 -05:00
mach-davinci Convert CONFIG_SOC_DA8XX et al to Kconfig 2018-01-22 20:09:26 -05:00
mach-exynos usb: net: migrate USB Ethernet adapters to Kconfig 2017-09-08 10:23:00 -04:00
mach-highbank
mach-imx Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-keystone cmd: ti: Generalize cmd_ddr3 command 2018-01-19 15:49:26 -05:00
mach-kirkwood ata: Migrate CONFIG_MVSATA_IDE to Kconfig 2017-12-12 18:16:06 -05:00
mach-meson ARM: arch-meson: fix writel arguments order 2017-12-18 13:06:30 -05:00
mach-mvebu arm: mvebu: enable boot from NAND 2017-11-30 08:30:27 +01:00
mach-omap2 arm: mach-omap2: Pass args to secure ROM in SRAM in SPL 2018-01-28 09:39:05 -05:00
mach-orion5x spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
mach-qemu ARM: qemu-arm: Add support for AArch64 2018-01-19 15:49:30 -05:00
mach-rmobile ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig 2018-01-24 23:27:21 +01:00
mach-rockchip rockchip: rk3288: enable rockusb support on rk3288 based device 2018-01-10 11:11:06 +01:00
mach-s5pc1xx
mach-snapdragon db820c: add qualcomm dragonboard 820C support 2018-01-15 16:29:02 -05:00
mach-socfpga ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32 2018-01-26 13:08:03 -05:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 board: stm32: Add stm32f429-evaluation board support 2018-01-28 09:39:05 -05:00
mach-sunxi sunxi: set the default CPUx frequency of H5 to 816MHz 2017-12-02 21:55:25 +05:30
mach-tegra ARM: Tegra186: calculate load addresses at boot 2018-01-12 10:12:32 -07:00
mach-uniphier ARM: uniphier: hide memory top by platform hook instead of CONFIG 2018-01-09 21:58:19 +09:00
mach-versatile
mach-zynq mtd: zynq: nand: Move board_nand_init() function to board.c 2017-11-29 08:02:40 +01:00
thumb1/include/asm/proc-armv
config.mk binman: arm: Include the binman symbol table 2017-12-12 19:53:45 -07:00
Kconfig sunxi: imply CONFIG_OF_LIBFDT_OVERLAY 2018-01-26 20:02:33 +05:30
Kconfig.debug
Makefile imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00