Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-26 22:52:18 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/ttcontrol/vision2/vision2.c
Jason Liu 5195890440 mx5: board: code clean up for checkboard code 
The boot cause code has been factor out to soc common
code,we need drop the part from the board support code

This patch also remove the redundant cpu version print

Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-05-23 08:36:46 +02:00

724 lines
21 KiB
C
Raw Blame History

/*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <mxc_gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/errno.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <linux/fb.h>
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
extern int mx51_fb_init(struct fb_videomode *mode);
static struct fb_videomode nec_nl6448bc26_09c = {
"NEC_NL6448BC26-09C",
60, /* Refresh */
640, /* xres */
480, /* yres */
37650, /* pixclock = 26.56Mhz */
48, /* left margin */
16, /* right margin */
31, /* upper margin */
12, /* lower margin */
96, /* hsync-len */
2, /* vsync-len */
0, /* sync */
FB_VMODE_NONINTERLACED, /* vmode */
0, /* flag */
};
#ifdef CONFIG_HW_WATCHDOG
#include <watchdog.h>
void hw_watchdog_reset(void)
{
int val;
/* toggle watchdog trigger pin */
val = mxc_gpio_get(66);
val = val ? 0 : 1;
mxc_gpio_set(66, val);
}
#endif
static void init_drive_strength(void)
{
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
/* Setting pad options */
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
}
u32 get_board_rev(void)
{
system_rev = get_cpu_rev();
return system_rev;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
return 0;
}
static void setup_weim(void)
{
struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
pweim->csgcr1 = 0x004100b9;
pweim->csgcr2 = 0x00000001;
pweim->csrcr1 = 0x0a018000;
pweim->csrcr2 = 0;
pweim->cswcr1 = 0x0704a240;
}
static void setup_uart(void)
{
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
/* console RX on Pin EIM_D25 */
mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
/* console TX on Pin EIM_D26 */
mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
}
#ifdef CONFIG_MXC_SPI
void spi_io_init(void)
{
/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/*
* SS1 will be used as GPIO because of uninterrupted
* long SPI transmissions (GPIO4_25)
*/
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
}
static void reset_peripherals(int reset)
{
if (reset) {
/* reset_n is on NANDF_D15 */
mxc_gpio_set(89, 0);
mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
#ifdef CONFIG_VISION2_HW_1_0
/*
* set FEC Configuration lines
* set levels of FEC config lines
*/
mxc_gpio_set(75, 0);
mxc_gpio_set(74, 1);
mxc_gpio_set(95, 1);
mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
/* set direction of FEC config lines */
mxc_gpio_set(59, 0);
mxc_gpio_set(60, 0);
mxc_gpio_set(61, 0);
mxc_gpio_set(55, 1);
mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
/* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
#endif
/*
* activate reset_n pin
* Select mux mode: ALT3 mux port: NAND D15
*/
mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
} else {
/* set FEC Control lines */
mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
udelay(500);
#ifdef CONFIG_VISION2_HW_1_0
/* FEC RDATA[3] */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
/* FEC RDATA[2] */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
/* FEC RDATA[1] */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
/* FEC RDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
/* FEC RX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
/* FEC RX_ER */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
/* FEC COL */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
#endif
}
}
static void power_init_mx51(void)
{
unsigned int val;
/* Write needed to Power Gate 2 register */
val = pmic_reg_read(REG_POWER_MISC);
/* enable VCAM with 2.775V to enable read from PMIC */
val = VCAMCONFIG | VCAMEN;
pmic_reg_write(REG_MODE_1, val);
/*
* Set switchers in Auto in NORMAL mode & STANDBY mode
* Setup the switcher mode for SW1 & SW2
*/
val = pmic_reg_read(REG_SW_4);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
pmic_reg_write(REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
val = pmic_reg_read(REG_SW_5);
val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
(SWMODE_MASK << SWMODE3_SHIFT));
val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
pmic_reg_write(REG_SW_5, val);
/* Set VGEN3 to 1.8V, VCAM to 3.0V */
val = pmic_reg_read(REG_SETTING_0);
val &= ~(VCAM_MASK | VGEN3_MASK);
val |= VCAM_3_0;
pmic_reg_write(REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
val = pmic_reg_read(REG_SETTING_1);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
pmic_reg_write(REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
pmic_reg_write(REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(REG_MODE_1, val);
val = pmic_reg_read(REG_POWER_CTL2);
val |= WDIRESET;
pmic_reg_write(REG_POWER_CTL2, val);
udelay(2500);
}
#endif
static void setup_gpios(void)
{
unsigned int i;
/* CAM_SUP_DISn, GPIO1_7 */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
/* DAB Display EN, GPIO3_1 */
mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
/* WDOG_TRIGGER, GPIO3_2 */
mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
/* Now we need to trigger the watchdog */
WATCHDOG_RESET();
/* Display2 TxEN, GPIO3_3 */
mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
/* DAB Light EN, GPIO3_4 */
mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
/* AUDIO_MUTE, GPIO3_5 */
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
/* SPARE_OUT, GPIO3_6 */
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
/* BEEPER_EN, GPIO3_26 */
mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
/* POWER_OFF, GPIO3_27 */
mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
/* FRAM_WE, GPIO3_30 */
mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
/* EXPANSION_EN, GPIO4_26 */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
/* PWM Output GPIO1_2 */
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);
/*
* Set GPIO1_4 to high and output; it is used to reset
* the system on reboot
*/
mxc_gpio_set(4, 1);
mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(7, 0);
mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
for (i = 65; i < 71; i++) {
mxc_gpio_set(i, 0);
mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
}
mxc_gpio_set(94, 0);
mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
/* Set POWER_OFF high */
mxc_gpio_set(91, 1);
mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(90, 0);
mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(122, 0);
mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(121, 1);
mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
WATCHDOG_RESET();
}
static void setup_fec(void)
{
/*FEC_MDIO*/
mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
/*FEC_MDC*/
mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
/* FEC RDATA[3] */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
/* FEC RDATA[2] */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
/* FEC RDATA[1] */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
/* FEC RDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
/* FEC TDATA[3] */
mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
/* FEC TDATA[2] */
mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
/* FEC TDATA[1] */
mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
/* FEC TDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
/* FEC TX_EN */
mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
/* FEC TX_ER */
mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
/* FEC TX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
/* FEC TX_COL */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
/* FEC RX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
/* FEC RX_CRS */
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
/* FEC RX_ER */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
/* FEC RX_DV */
mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
}
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{MMC_SDHC1_BASE_ADDR, 1},
};
int get_mmc_getcd(u8 *cd, struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
*cd = mxc_gpio_get(0);
else
*cd = 0;
return 0;
}
#ifdef CONFIG_FSL_ESDHC
int board_mmc_init(bd_t *bis)
{
mxc_request_iomux(MX51_PIN_SD1_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_CLK,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA2,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA3,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_GPIO1_0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
PAD_CTL_HYS_ENABLE);
mxc_request_iomux(MX51_PIN_GPIO1_1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
PAD_CTL_HYS_ENABLE);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
int board_early_init_f(void)
{
init_drive_strength();
/* Setup debug led */
mxc_gpio_set(6, 0);
mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* wait a little while to give the pll time to settle */
sdelay(100000);
setup_weim();
setup_uart();
setup_fec();
setup_gpios();
spi_io_init();
return 0;
}
static void backlight(int on)
{
if (on) {
mxc_gpio_set(65, 1);
udelay(10000);
mxc_gpio_set(68, 1);
} else {
mxc_gpio_set(65, 0);
mxc_gpio_set(68, 0);
}
}
void lcd_enable(void)
{
int ret;
mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
mxc_gpio_set(2, 1);
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
ret = mx51_fb_init(&nec_nl6448bc26_09c);
if (ret)
puts("LCD cannot be configured\n");
}
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
power_init_mx51();
reset_peripherals(1);
udelay(2000);
reset_peripherals(0);
udelay(2000);
/* Early revisions require a second reset */
#ifdef CONFIG_VISION2_HW_1_0
reset_peripherals(1);
udelay(2000);
reset_peripherals(0);
udelay(2000);
#endif
return 0;
}
int checkboard(void)
{
puts("Board: TTControl Vision II CPU V\n");
return 0;
}
int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int on;
if (argc < 2)
return cmd_usage(cmdtp);
on = (strcmp(argv[1], "on") == 0);
backlight(on);
return 0;
}
U_BOOT_CMD(
lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd,
"Vision2 Backlight",
"lcdbl [on|off]\n"
);
Reference in a new issue View git blame Copy permalink