u-boot/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
Patrick Delaunay ff07cc9ed1 scripts: remove some configs in config_whitelist.txt
Remove some config finishing by _ badly added by
scripts/build-whitelist.sh when joker is used in comments.

for example:
  doc/uImage.FIT/command_syntax_extensions.txt:
     ... #ifdef CONFIG_OF_*  |	...

  cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \
     FLASH|MMC|FAT|EXT4|\

Remove also configs only used in comments:
- CONFIG_BOOGER in include/linux/kconfig.h
- CONFIG_COMMANDS
- CONFIG_INIT_IGNORE_ERROR
- CONFIG_REG_*
- CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-10-15 07:55:17 -04:00

92 lines
2.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015
* Texas Instruments Incorporated
*
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef _DRA7_IODELAY_H_
#define _DRA7_IODELAY_H_
#include <asm/arch/sys_proto.h>
/* CFG REG_0 */
#define CFG_REG_0_OFFSET 0xC
#define CFG_REG_ROM_READ_SHIFT 1
#define CFG_REG_ROM_READ_MASK (1 << 1)
#define CFG_REG_CALIB_STRT_SHIFT 0
#define CFG_REG_CALIB_STRT_MASK (1 << 0)
#define CFG_REG_CALIB_STRT 1
#define CFG_REG_CALIB_END 0
#define CFG_REG_ROM_READ_START (1 << 1)
#define CFG_REG_ROM_READ_END (0 << 1)
/* CFG REG_2 */
#define CFG_REG_2_OFFSET 0x14
#define CFG_REG_REFCLK_PERIOD_SHIFT 0
#define CFG_REG_REFCLK_PERIOD_MASK (0xFFFF << 0)
#define CFG_REG_REFCLK_PERIOD 0x2EF
/* CFG REG_8 */
#define CFG_REG_8_OFFSET 0x2C
#define CFG_IODELAY_UNLOCK_KEY 0x0000AAAA
#define CFG_IODELAY_LOCK_KEY 0x0000AAAB
/* CFG REG_3/4 */
#define CFG_REG_3_OFFSET 0x18
#define CFG_REG_4_OFFSET 0x1C
#define CFG_REG_DLY_CNT_SHIFT 16
#define CFG_REG_DLY_CNT_MASK (0xFFFF << 16)
#define CFG_REG_REF_CNT_SHIFT 0
#define CFG_REG_REF_CNT_MASK (0xFFFF << 0)
/* CTRL_CORE_SMA_SW_0 */
#define CTRL_ISOLATE_SHIFT 2
#define CTRL_ISOLATE_MASK (1 << 2)
#define ISOLATE_IO 1
#define DEISOLATE_IO 0
/* CTRL_CORE_SMA_SW_1 */
#define RGMII2_ID_MODE_N_MASK (1 << 26)
#define RGMII1_ID_MODE_N_MASK (1 << 25)
/* PRM_IO_PMCTRL */
#define PMCTRL_ISOCLK_OVERRIDE_SHIFT 0
#define PMCTRL_ISOCLK_OVERRIDE_MASK (1 << 0)
#define PMCTRL_ISOCLK_STATUS_SHIFT 1
#define PMCTRL_ISOCLK_STATUS_MASK (1 << 1)
#define PMCTRL_ISOCLK_OVERRIDE_CTRL 1
#define PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL 0
#define ERR_CALIBRATE_IODELAY 0x1
#define ERR_DEISOLATE_IO 0x2
#define ERR_ISOLATE_IO 0x4
#define ERR_UPDATE_DELAY 0x8
#define ERR_CPDE 0x3
#define ERR_FPDE 0x5
/* CFG_XXX */
#define CFG_X_SIGNATURE_SHIFT 12
#define CFG_X_SIGNATURE_MASK (0x3F << 12)
#define CFG_X_LOCK_SHIFT 10
#define CFG_X_LOCK_MASK (0x1 << 10)
#define CFG_X_COARSE_DLY_SHIFT 5
#define CFG_X_COARSE_DLY_MASK (0x1F << 5)
#define CFG_X_FINE_DLY_SHIFT 0
#define CFG_X_FINE_DLY_MASK (0x1F << 0)
#define CFG_X_SIGNATURE 0x29
#define CFG_X_LOCK 1
void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
struct iodelay_cfg_entry const *iodelay,
int niodelays);
void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
struct iodelay_cfg_entry const *iodelay,
int niodelays);
int __recalibrate_iodelay_start(void);
void __recalibrate_iodelay_end(int ret);
int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array,
int niodelays);
#endif