mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
aa14b42d53
This patch intends to add a new proid for Exynos5800 which is a variant of Exynos5420. Product id for Exynos5800 is 0x5422. Both Exynos5420 and Exynos5800 are pin to pin compitable. This gives us an advantage of reusing Exynos5420 clock, pinmux, memory and other settings. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
1005 lines
25 KiB
C
1005 lines
25 KiB
C
/*
|
|
* Clock setup for SMDK5250 board based on EXYNOS5
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/spl.h>
|
|
#include <asm/arch/dwmmc.h>
|
|
|
|
#include "clock_init.h"
|
|
#include "common_setup.h"
|
|
#include "exynos5_setup.h"
|
|
|
|
#define FSYS1_MMC0_DIV_MASK 0xff0f
|
|
#define FSYS1_MMC0_DIV_VAL 0x0701
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct arm_clk_ratios arm_clk_ratios[] = {
|
|
#ifdef CONFIG_EXYNOS5420
|
|
{
|
|
.arm_freq_mhz = 900,
|
|
|
|
.apll_mdiv = 0x96,
|
|
.apll_pdiv = 0x2,
|
|
.apll_sdiv = 0x1,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x3,
|
|
.pclk_dbg_ratio = 0x6,
|
|
.atb_ratio = 0x6,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x0,
|
|
.cpud_ratio = 0x2,
|
|
.arm_ratio = 0x0,
|
|
}
|
|
#else
|
|
{
|
|
.arm_freq_mhz = 600,
|
|
|
|
.apll_mdiv = 0xc8,
|
|
.apll_pdiv = 0x4,
|
|
.apll_sdiv = 0x1,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x1,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x2,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x1,
|
|
.arm_ratio = 0x0,
|
|
}, {
|
|
.arm_freq_mhz = 800,
|
|
|
|
.apll_mdiv = 0x64,
|
|
.apll_pdiv = 0x3,
|
|
.apll_sdiv = 0x0,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x1,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x3,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x2,
|
|
.arm_ratio = 0x0,
|
|
}, {
|
|
.arm_freq_mhz = 1000,
|
|
|
|
.apll_mdiv = 0x7d,
|
|
.apll_pdiv = 0x3,
|
|
.apll_sdiv = 0x0,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x1,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x4,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x2,
|
|
.arm_ratio = 0x0,
|
|
}, {
|
|
.arm_freq_mhz = 1200,
|
|
|
|
.apll_mdiv = 0x96,
|
|
.apll_pdiv = 0x3,
|
|
.apll_sdiv = 0x0,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x3,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x5,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x3,
|
|
.arm_ratio = 0x0,
|
|
}, {
|
|
.arm_freq_mhz = 1400,
|
|
|
|
.apll_mdiv = 0xaf,
|
|
.apll_pdiv = 0x3,
|
|
.apll_sdiv = 0x0,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x3,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x6,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x3,
|
|
.arm_ratio = 0x0,
|
|
}, {
|
|
.arm_freq_mhz = 1700,
|
|
|
|
.apll_mdiv = 0x1a9,
|
|
.apll_pdiv = 0x6,
|
|
.apll_sdiv = 0x0,
|
|
|
|
.arm2_ratio = 0x0,
|
|
.apll_ratio = 0x3,
|
|
.pclk_dbg_ratio = 0x1,
|
|
.atb_ratio = 0x6,
|
|
.periph_ratio = 0x7,
|
|
.acp_ratio = 0x7,
|
|
.cpud_ratio = 0x3,
|
|
.arm_ratio = 0x0,
|
|
}
|
|
#endif
|
|
};
|
|
|
|
struct mem_timings mem_timings[] = {
|
|
#ifdef CONFIG_EXYNOS5420
|
|
{
|
|
.mem_manuf = MEM_MANUF_SAMSUNG,
|
|
.mem_type = DDR_MODE_DDR3,
|
|
.frequency_mhz = 800,
|
|
|
|
/* MPLL @800MHz*/
|
|
.mpll_mdiv = 0xc8,
|
|
.mpll_pdiv = 0x3,
|
|
.mpll_sdiv = 0x1,
|
|
/* CPLL @666MHz */
|
|
.cpll_mdiv = 0xde,
|
|
.cpll_pdiv = 0x4,
|
|
.cpll_sdiv = 0x1,
|
|
/* EPLL @600MHz */
|
|
.epll_mdiv = 0x64,
|
|
.epll_pdiv = 0x2,
|
|
.epll_sdiv = 0x1,
|
|
/* VPLL @430MHz */
|
|
.vpll_mdiv = 0xd7,
|
|
.vpll_pdiv = 0x3,
|
|
.vpll_sdiv = 0x2,
|
|
/* BPLL @800MHz */
|
|
.bpll_mdiv = 0xc8,
|
|
.bpll_pdiv = 0x3,
|
|
.bpll_sdiv = 0x1,
|
|
/* KPLL @600MHz */
|
|
.kpll_mdiv = 0x190,
|
|
.kpll_pdiv = 0x4,
|
|
.kpll_sdiv = 0x2,
|
|
/* DPLL @600MHz */
|
|
.dpll_mdiv = 0x190,
|
|
.dpll_pdiv = 0x4,
|
|
.dpll_sdiv = 0x2,
|
|
/* IPLL @370MHz */
|
|
.ipll_mdiv = 0xb9,
|
|
.ipll_pdiv = 0x3,
|
|
.ipll_sdiv = 0x2,
|
|
/* SPLL @400MHz */
|
|
.spll_mdiv = 0xc8,
|
|
.spll_pdiv = 0x3,
|
|
.spll_sdiv = 0x2,
|
|
/* RPLL @70.5Mhz */
|
|
.rpll_mdiv = 0x5E,
|
|
.rpll_pdiv = 0x2,
|
|
.rpll_sdiv = 0x4,
|
|
|
|
.direct_cmd_msr = {
|
|
0x00020018, 0x00030000, 0x00010046, 0x00000d70,
|
|
0x00000c70
|
|
},
|
|
.timing_ref = 0x000000bb,
|
|
.timing_row = 0x6836650f,
|
|
.timing_data = 0x3630580b,
|
|
.timing_power = 0x41000a26,
|
|
.phy0_dqs = 0x08080808,
|
|
.phy1_dqs = 0x08080808,
|
|
.phy0_dq = 0x08080808,
|
|
.phy1_dq = 0x08080808,
|
|
.phy0_tFS = 0x8,
|
|
.phy1_tFS = 0x8,
|
|
.phy0_pulld_dqs = 0xf,
|
|
.phy1_pulld_dqs = 0xf,
|
|
|
|
.lpddr3_ctrl_phy_reset = 0x1,
|
|
.ctrl_start_point = 0x10,
|
|
.ctrl_inc = 0x10,
|
|
.ctrl_start = 0x1,
|
|
.ctrl_dll_on = 0x1,
|
|
.ctrl_ref = 0x8,
|
|
|
|
.ctrl_force = 0x1a,
|
|
.ctrl_rdlat = 0x0b,
|
|
.ctrl_bstlen = 0x08,
|
|
|
|
.fp_resync = 0x8,
|
|
.iv_size = 0x7,
|
|
.dfi_init_start = 1,
|
|
.aref_en = 1,
|
|
|
|
.rd_fetch = 0x3,
|
|
|
|
.zq_mode_dds = 0x7,
|
|
.zq_mode_term = 0x1,
|
|
.zq_mode_noterm = 1,
|
|
|
|
/*
|
|
* Dynamic Clock: Always Running
|
|
* Memory Burst length: 8
|
|
* Number of chips: 1
|
|
* Memory Bus width: 32 bit
|
|
* Memory Type: DDR3
|
|
* Additional Latancy for PLL: 0 Cycle
|
|
*/
|
|
.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
|
|
DMC_MEMCONTROL_TP_DISABLE |
|
|
DMC_MEMCONTROL_DSREF_DISABLE |
|
|
DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
|
|
DMC_MEMCONTROL_MEM_TYPE_DDR3 |
|
|
DMC_MEMCONTROL_MEM_WIDTH_32BIT |
|
|
DMC_MEMCONTROL_NUM_CHIP_1 |
|
|
DMC_MEMCONTROL_BL_8 |
|
|
DMC_MEMCONTROL_PZQ_DISABLE |
|
|
DMC_MEMCONTROL_MRR_BYTE_7_0,
|
|
.memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT |
|
|
DMC_MEMCONFIGX_CHIP_COL_10 |
|
|
DMC_MEMCONFIGX_CHIP_ROW_15 |
|
|
DMC_MEMCONFIGX_CHIP_BANK_8,
|
|
.prechconfig_tp_cnt = 0xff,
|
|
.dpwrdn_cyc = 0xff,
|
|
.dsref_cyc = 0xffff,
|
|
.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
|
|
DMC_CONCONTROL_TIMEOUT_LEVEL0 |
|
|
DMC_CONCONTROL_RD_FETCH_DISABLE |
|
|
DMC_CONCONTROL_EMPTY_DISABLE |
|
|
DMC_CONCONTROL_AREF_EN_DISABLE |
|
|
DMC_CONCONTROL_IO_PD_CON_DISABLE,
|
|
.dmc_channels = 1,
|
|
.chips_per_channel = 1,
|
|
.chips_to_configure = 1,
|
|
.send_zq_init = 1,
|
|
.gate_leveling_enable = 1,
|
|
.read_leveling_enable = 0,
|
|
}
|
|
#else
|
|
{
|
|
.mem_manuf = MEM_MANUF_ELPIDA,
|
|
.mem_type = DDR_MODE_DDR3,
|
|
.frequency_mhz = 800,
|
|
.mpll_mdiv = 0xc8,
|
|
.mpll_pdiv = 0x3,
|
|
.mpll_sdiv = 0x0,
|
|
.cpll_mdiv = 0xde,
|
|
.cpll_pdiv = 0x4,
|
|
.cpll_sdiv = 0x2,
|
|
.gpll_mdiv = 0x215,
|
|
.gpll_pdiv = 0xc,
|
|
.gpll_sdiv = 0x1,
|
|
.epll_mdiv = 0x60,
|
|
.epll_pdiv = 0x3,
|
|
.epll_sdiv = 0x3,
|
|
.vpll_mdiv = 0x96,
|
|
.vpll_pdiv = 0x3,
|
|
.vpll_sdiv = 0x2,
|
|
|
|
.bpll_mdiv = 0x64,
|
|
.bpll_pdiv = 0x3,
|
|
.bpll_sdiv = 0x0,
|
|
.pclk_cdrex_ratio = 0x5,
|
|
.direct_cmd_msr = {
|
|
0x00020018, 0x00030000, 0x00010042, 0x00000d70
|
|
},
|
|
.timing_ref = 0x000000bb,
|
|
.timing_row = 0x8c36650e,
|
|
.timing_data = 0x3630580b,
|
|
.timing_power = 0x41000a44,
|
|
.phy0_dqs = 0x08080808,
|
|
.phy1_dqs = 0x08080808,
|
|
.phy0_dq = 0x08080808,
|
|
.phy1_dq = 0x08080808,
|
|
.phy0_tFS = 0x4,
|
|
.phy1_tFS = 0x4,
|
|
.phy0_pulld_dqs = 0xf,
|
|
.phy1_pulld_dqs = 0xf,
|
|
|
|
.lpddr3_ctrl_phy_reset = 0x1,
|
|
.ctrl_start_point = 0x10,
|
|
.ctrl_inc = 0x10,
|
|
.ctrl_start = 0x1,
|
|
.ctrl_dll_on = 0x1,
|
|
.ctrl_ref = 0x8,
|
|
|
|
.ctrl_force = 0x1a,
|
|
.ctrl_rdlat = 0x0b,
|
|
.ctrl_bstlen = 0x08,
|
|
|
|
.fp_resync = 0x8,
|
|
.iv_size = 0x7,
|
|
.dfi_init_start = 1,
|
|
.aref_en = 1,
|
|
|
|
.rd_fetch = 0x3,
|
|
|
|
.zq_mode_dds = 0x7,
|
|
.zq_mode_term = 0x1,
|
|
.zq_mode_noterm = 0,
|
|
|
|
/*
|
|
* Dynamic Clock: Always Running
|
|
* Memory Burst length: 8
|
|
* Number of chips: 1
|
|
* Memory Bus width: 32 bit
|
|
* Memory Type: DDR3
|
|
* Additional Latancy for PLL: 0 Cycle
|
|
*/
|
|
.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
|
|
DMC_MEMCONTROL_TP_DISABLE |
|
|
DMC_MEMCONTROL_DSREF_ENABLE |
|
|
DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
|
|
DMC_MEMCONTROL_MEM_TYPE_DDR3 |
|
|
DMC_MEMCONTROL_MEM_WIDTH_32BIT |
|
|
DMC_MEMCONTROL_NUM_CHIP_1 |
|
|
DMC_MEMCONTROL_BL_8 |
|
|
DMC_MEMCONTROL_PZQ_DISABLE |
|
|
DMC_MEMCONTROL_MRR_BYTE_7_0,
|
|
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
|
|
DMC_MEMCONFIGX_CHIP_COL_10 |
|
|
DMC_MEMCONFIGX_CHIP_ROW_15 |
|
|
DMC_MEMCONFIGX_CHIP_BANK_8,
|
|
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
|
|
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
|
|
.prechconfig_tp_cnt = 0xff,
|
|
.dpwrdn_cyc = 0xff,
|
|
.dsref_cyc = 0xffff,
|
|
.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
|
|
DMC_CONCONTROL_TIMEOUT_LEVEL0 |
|
|
DMC_CONCONTROL_RD_FETCH_DISABLE |
|
|
DMC_CONCONTROL_EMPTY_DISABLE |
|
|
DMC_CONCONTROL_AREF_EN_DISABLE |
|
|
DMC_CONCONTROL_IO_PD_CON_DISABLE,
|
|
.dmc_channels = 2,
|
|
.chips_per_channel = 2,
|
|
.chips_to_configure = 1,
|
|
.send_zq_init = 1,
|
|
.impedance = IMP_OUTPUT_DRV_30_OHM,
|
|
.gate_leveling_enable = 0,
|
|
}, {
|
|
.mem_manuf = MEM_MANUF_SAMSUNG,
|
|
.mem_type = DDR_MODE_DDR3,
|
|
.frequency_mhz = 800,
|
|
.mpll_mdiv = 0xc8,
|
|
.mpll_pdiv = 0x3,
|
|
.mpll_sdiv = 0x0,
|
|
.cpll_mdiv = 0xde,
|
|
.cpll_pdiv = 0x4,
|
|
.cpll_sdiv = 0x2,
|
|
.gpll_mdiv = 0x215,
|
|
.gpll_pdiv = 0xc,
|
|
.gpll_sdiv = 0x1,
|
|
.epll_mdiv = 0x60,
|
|
.epll_pdiv = 0x3,
|
|
.epll_sdiv = 0x3,
|
|
.vpll_mdiv = 0x96,
|
|
.vpll_pdiv = 0x3,
|
|
.vpll_sdiv = 0x2,
|
|
|
|
.bpll_mdiv = 0x64,
|
|
.bpll_pdiv = 0x3,
|
|
.bpll_sdiv = 0x0,
|
|
.pclk_cdrex_ratio = 0x5,
|
|
.direct_cmd_msr = {
|
|
0x00020018, 0x00030000, 0x00010000, 0x00000d70
|
|
},
|
|
.timing_ref = 0x000000bb,
|
|
.timing_row = 0x8c36650e,
|
|
.timing_data = 0x3630580b,
|
|
.timing_power = 0x41000a44,
|
|
.phy0_dqs = 0x08080808,
|
|
.phy1_dqs = 0x08080808,
|
|
.phy0_dq = 0x08080808,
|
|
.phy1_dq = 0x08080808,
|
|
.phy0_tFS = 0x8,
|
|
.phy1_tFS = 0x8,
|
|
.phy0_pulld_dqs = 0xf,
|
|
.phy1_pulld_dqs = 0xf,
|
|
|
|
.lpddr3_ctrl_phy_reset = 0x1,
|
|
.ctrl_start_point = 0x10,
|
|
.ctrl_inc = 0x10,
|
|
.ctrl_start = 0x1,
|
|
.ctrl_dll_on = 0x1,
|
|
.ctrl_ref = 0x8,
|
|
|
|
.ctrl_force = 0x1a,
|
|
.ctrl_rdlat = 0x0b,
|
|
.ctrl_bstlen = 0x08,
|
|
|
|
.fp_resync = 0x8,
|
|
.iv_size = 0x7,
|
|
.dfi_init_start = 1,
|
|
.aref_en = 1,
|
|
|
|
.rd_fetch = 0x3,
|
|
|
|
.zq_mode_dds = 0x5,
|
|
.zq_mode_term = 0x1,
|
|
.zq_mode_noterm = 1,
|
|
|
|
/*
|
|
* Dynamic Clock: Always Running
|
|
* Memory Burst length: 8
|
|
* Number of chips: 1
|
|
* Memory Bus width: 32 bit
|
|
* Memory Type: DDR3
|
|
* Additional Latancy for PLL: 0 Cycle
|
|
*/
|
|
.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_DISABLE |
|
|
DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
|
|
DMC_MEMCONTROL_TP_DISABLE |
|
|
DMC_MEMCONTROL_DSREF_ENABLE |
|
|
DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
|
|
DMC_MEMCONTROL_MEM_TYPE_DDR3 |
|
|
DMC_MEMCONTROL_MEM_WIDTH_32BIT |
|
|
DMC_MEMCONTROL_NUM_CHIP_1 |
|
|
DMC_MEMCONTROL_BL_8 |
|
|
DMC_MEMCONTROL_PZQ_DISABLE |
|
|
DMC_MEMCONTROL_MRR_BYTE_7_0,
|
|
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
|
|
DMC_MEMCONFIGX_CHIP_COL_10 |
|
|
DMC_MEMCONFIGX_CHIP_ROW_15 |
|
|
DMC_MEMCONFIGX_CHIP_BANK_8,
|
|
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
|
|
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
|
|
.prechconfig_tp_cnt = 0xff,
|
|
.dpwrdn_cyc = 0xff,
|
|
.dsref_cyc = 0xffff,
|
|
.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
|
|
DMC_CONCONTROL_TIMEOUT_LEVEL0 |
|
|
DMC_CONCONTROL_RD_FETCH_DISABLE |
|
|
DMC_CONCONTROL_EMPTY_DISABLE |
|
|
DMC_CONCONTROL_AREF_EN_DISABLE |
|
|
DMC_CONCONTROL_IO_PD_CON_DISABLE,
|
|
.dmc_channels = 2,
|
|
.chips_per_channel = 2,
|
|
.chips_to_configure = 1,
|
|
.send_zq_init = 1,
|
|
.impedance = IMP_OUTPUT_DRV_40_OHM,
|
|
.gate_leveling_enable = 1,
|
|
}
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* Get the required memory type and speed (SPL version).
|
|
*
|
|
* In SPL we have no device tree, so we use the machine parameters
|
|
*
|
|
* @param mem_type Returns memory type
|
|
* @param frequency_mhz Returns memory speed in MHz
|
|
* @param arm_freq Returns ARM clock speed in MHz
|
|
* @param mem_manuf Return Memory Manufacturer name
|
|
*/
|
|
static void clock_get_mem_selection(enum ddr_mode *mem_type,
|
|
unsigned *frequency_mhz, unsigned *arm_freq,
|
|
enum mem_manuf *mem_manuf)
|
|
{
|
|
struct spl_machine_param *params;
|
|
|
|
params = spl_get_machine_params();
|
|
*mem_type = params->mem_type;
|
|
*frequency_mhz = params->frequency_mhz;
|
|
*arm_freq = params->arm_freq_mhz;
|
|
*mem_manuf = params->mem_manuf;
|
|
}
|
|
|
|
/* Get the ratios for setting ARM clock */
|
|
struct arm_clk_ratios *get_arm_ratios(void)
|
|
{
|
|
struct arm_clk_ratios *arm_ratio;
|
|
enum ddr_mode mem_type;
|
|
enum mem_manuf mem_manuf;
|
|
unsigned frequency_mhz, arm_freq;
|
|
int i;
|
|
|
|
clock_get_mem_selection(&mem_type, &frequency_mhz,
|
|
&arm_freq, &mem_manuf);
|
|
|
|
for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
|
|
i++, arm_ratio++) {
|
|
if (arm_ratio->arm_freq_mhz == arm_freq)
|
|
return arm_ratio;
|
|
}
|
|
|
|
/* will hang if failed to find clock ratio */
|
|
while (1)
|
|
;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
struct mem_timings *clock_get_mem_timings(void)
|
|
{
|
|
struct mem_timings *mem;
|
|
enum ddr_mode mem_type;
|
|
enum mem_manuf mem_manuf;
|
|
unsigned frequency_mhz, arm_freq;
|
|
int i;
|
|
|
|
clock_get_mem_selection(&mem_type, &frequency_mhz,
|
|
&arm_freq, &mem_manuf);
|
|
for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
|
|
i++, mem++) {
|
|
if (mem->mem_type == mem_type &&
|
|
mem->frequency_mhz == frequency_mhz &&
|
|
mem->mem_manuf == mem_manuf)
|
|
return mem;
|
|
}
|
|
|
|
/* will hang if failed to find memory timings */
|
|
while (1)
|
|
;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void exynos5250_system_clock_init(void)
|
|
{
|
|
struct exynos5_clock *clk =
|
|
(struct exynos5_clock *)samsung_get_base_clock();
|
|
struct mem_timings *mem;
|
|
struct arm_clk_ratios *arm_clk_ratio;
|
|
u32 val, tmp;
|
|
|
|
mem = clock_get_mem_timings();
|
|
arm_clk_ratio = get_arm_ratios();
|
|
|
|
clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
|
|
do {
|
|
val = readl(&clk->mux_stat_cpu);
|
|
} while ((val | MUX_APLL_SEL_MASK) != val);
|
|
|
|
clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
|
|
do {
|
|
val = readl(&clk->mux_stat_core1);
|
|
} while ((val | MUX_MPLL_SEL_MASK) != val);
|
|
|
|
clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
|
|
clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
|
|
clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
|
|
clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
|
|
tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
|
|
| MUX_GPLL_SEL_MASK;
|
|
do {
|
|
val = readl(&clk->mux_stat_top2);
|
|
} while ((val | tmp) != val);
|
|
|
|
clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
|
|
do {
|
|
val = readl(&clk->mux_stat_cdrex);
|
|
} while ((val | MUX_BPLL_SEL_MASK) != val);
|
|
|
|
/* PLL locktime */
|
|
writel(mem->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
|
|
writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
|
|
writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
|
|
writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
|
|
writel(mem->gpll_pdiv * PLL_X_LOCK_FACTOR, &clk->gpll_lock);
|
|
writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
|
|
writel(mem->vpll_pdiv * PLL_X_LOCK_FACTOR, &clk->vpll_lock);
|
|
|
|
writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
|
|
|
|
writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
|
|
do {
|
|
val = readl(&clk->mux_stat_cpu);
|
|
} while ((val | HPM_SEL_SCLK_MPLL) != val);
|
|
|
|
val = arm_clk_ratio->arm2_ratio << 28
|
|
| arm_clk_ratio->apll_ratio << 24
|
|
| arm_clk_ratio->pclk_dbg_ratio << 20
|
|
| arm_clk_ratio->atb_ratio << 16
|
|
| arm_clk_ratio->periph_ratio << 12
|
|
| arm_clk_ratio->acp_ratio << 8
|
|
| arm_clk_ratio->cpud_ratio << 4
|
|
| arm_clk_ratio->arm_ratio;
|
|
writel(val, &clk->div_cpu0);
|
|
do {
|
|
val = readl(&clk->div_stat_cpu0);
|
|
} while (0 != val);
|
|
|
|
writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
|
|
do {
|
|
val = readl(&clk->div_stat_cpu1);
|
|
} while (0 != val);
|
|
|
|
/* Set APLL */
|
|
writel(APLL_CON1_VAL, &clk->apll_con1);
|
|
val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
|
|
arm_clk_ratio->apll_sdiv);
|
|
writel(val, &clk->apll_con0);
|
|
while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set MPLL */
|
|
writel(MPLL_CON1_VAL, &clk->mpll_con1);
|
|
val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
|
|
writel(val, &clk->mpll_con0);
|
|
while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set BPLL */
|
|
writel(BPLL_CON1_VAL, &clk->bpll_con1);
|
|
val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
|
|
writel(val, &clk->bpll_con0);
|
|
while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set CPLL */
|
|
writel(CPLL_CON1_VAL, &clk->cpll_con1);
|
|
val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
|
|
writel(val, &clk->cpll_con0);
|
|
while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set GPLL */
|
|
writel(GPLL_CON1_VAL, &clk->gpll_con1);
|
|
val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
|
|
writel(val, &clk->gpll_con0);
|
|
while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set EPLL */
|
|
writel(EPLL_CON2_VAL, &clk->epll_con2);
|
|
writel(EPLL_CON1_VAL, &clk->epll_con1);
|
|
val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
|
|
writel(val, &clk->epll_con0);
|
|
while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set VPLL */
|
|
writel(VPLL_CON2_VAL, &clk->vpll_con2);
|
|
writel(VPLL_CON1_VAL, &clk->vpll_con1);
|
|
val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
|
|
writel(val, &clk->vpll_con0);
|
|
while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
|
|
;
|
|
|
|
writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
|
|
writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
|
|
while (readl(&clk->div_stat_core0) != 0)
|
|
;
|
|
|
|
writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
|
|
while (readl(&clk->div_stat_core1) != 0)
|
|
;
|
|
|
|
writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
|
|
while (readl(&clk->div_stat_sysrgt) != 0)
|
|
;
|
|
|
|
writel(CLK_DIV_ACP_VAL, &clk->div_acp);
|
|
while (readl(&clk->div_stat_acp) != 0)
|
|
;
|
|
|
|
writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
|
|
while (readl(&clk->div_stat_syslft) != 0)
|
|
;
|
|
|
|
writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
|
|
writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
|
|
writel(TOP2_VAL, &clk->src_top2);
|
|
writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
|
|
|
|
writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
|
|
while (readl(&clk->div_stat_top0))
|
|
;
|
|
|
|
writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
|
|
while (readl(&clk->div_stat_top1))
|
|
;
|
|
|
|
writel(CLK_SRC_LEX_VAL, &clk->src_lex);
|
|
while (1) {
|
|
val = readl(&clk->mux_stat_lex);
|
|
if (val == (val | 1))
|
|
break;
|
|
}
|
|
|
|
writel(CLK_DIV_LEX_VAL, &clk->div_lex);
|
|
while (readl(&clk->div_stat_lex))
|
|
;
|
|
|
|
writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
|
|
while (readl(&clk->div_stat_r0x))
|
|
;
|
|
|
|
writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
|
|
while (readl(&clk->div_stat_r0x))
|
|
;
|
|
|
|
writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
|
|
while (readl(&clk->div_stat_r1x))
|
|
;
|
|
|
|
writel(CLK_REG_DISABLE, &clk->src_cdrex);
|
|
|
|
writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
|
|
while (readl(&clk->div_stat_cdrex))
|
|
;
|
|
|
|
val = readl(&clk->src_cpu);
|
|
val |= CLK_SRC_CPU_VAL;
|
|
writel(val, &clk->src_cpu);
|
|
|
|
val = readl(&clk->src_top2);
|
|
val |= CLK_SRC_TOP2_VAL;
|
|
writel(val, &clk->src_top2);
|
|
|
|
val = readl(&clk->src_core1);
|
|
val |= CLK_SRC_CORE1_VAL;
|
|
writel(val, &clk->src_core1);
|
|
|
|
writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
|
|
writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
|
|
while (readl(&clk->div_stat_fsys0))
|
|
;
|
|
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
|
|
writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);
|
|
|
|
writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
|
|
writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
|
|
|
|
writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
|
|
writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
|
|
writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
|
|
writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
|
|
|
|
writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
|
|
writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
|
|
writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
|
|
writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
|
|
writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
|
|
|
|
/* FIMD1 SRC CLK SELECTION */
|
|
writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);
|
|
|
|
val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
|
|
| MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
|
|
| MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
|
|
| MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
|
|
writel(val, &clk->div_fsys2);
|
|
}
|
|
|
|
static void exynos5420_system_clock_init(void)
|
|
{
|
|
struct exynos5420_clock *clk =
|
|
(struct exynos5420_clock *)samsung_get_base_clock();
|
|
struct mem_timings *mem;
|
|
struct arm_clk_ratios *arm_clk_ratio;
|
|
u32 val;
|
|
|
|
mem = clock_get_mem_timings();
|
|
arm_clk_ratio = get_arm_ratios();
|
|
|
|
/* PLL locktime */
|
|
writel(arm_clk_ratio->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
|
|
writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
|
|
writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
|
|
writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
|
|
writel(mem->dpll_pdiv * PLL_LOCK_FACTOR, &clk->dpll_lock);
|
|
writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
|
|
writel(mem->vpll_pdiv * PLL_LOCK_FACTOR, &clk->vpll_lock);
|
|
writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock);
|
|
writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock);
|
|
writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock);
|
|
writel(mem->rpll_pdiv * PLL_X_LOCK_FACTOR, &clk->rpll_lock);
|
|
|
|
setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK);
|
|
|
|
writel(0, &clk->src_top6);
|
|
|
|
writel(0, &clk->src_cdrex);
|
|
writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
|
|
writel(HPM_RATIO, &clk->div_cpu1);
|
|
writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
|
|
|
|
/* switch A15 clock source to OSC clock before changing APLL */
|
|
clrbits_le32(&clk->src_cpu, APLL_FOUT);
|
|
|
|
/* Set APLL */
|
|
writel(APLL_CON1_VAL, &clk->apll_con1);
|
|
val = set_pll(arm_clk_ratio->apll_mdiv,
|
|
arm_clk_ratio->apll_pdiv,
|
|
arm_clk_ratio->apll_sdiv);
|
|
writel(val, &clk->apll_con0);
|
|
while ((readl(&clk->apll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* now it is safe to switch to APLL */
|
|
setbits_le32(&clk->src_cpu, APLL_FOUT);
|
|
|
|
writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
|
|
writel(CLK_DIV_KFC_VAL, &clk->div_kfc0);
|
|
|
|
/* switch A7 clock source to OSC clock before changing KPLL */
|
|
clrbits_le32(&clk->src_kfc, KPLL_FOUT);
|
|
|
|
/* Set KPLL*/
|
|
writel(KPLL_CON1_VAL, &clk->kpll_con1);
|
|
val = set_pll(mem->kpll_mdiv, mem->kpll_pdiv, mem->kpll_sdiv);
|
|
writel(val, &clk->kpll_con0);
|
|
while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* now it is safe to switch to KPLL */
|
|
setbits_le32(&clk->src_kfc, KPLL_FOUT);
|
|
|
|
/* Set MPLL */
|
|
writel(MPLL_CON1_VAL, &clk->mpll_con1);
|
|
val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
|
|
writel(val, &clk->mpll_con0);
|
|
while ((readl(&clk->mpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set DPLL */
|
|
writel(DPLL_CON1_VAL, &clk->dpll_con1);
|
|
val = set_pll(mem->dpll_mdiv, mem->dpll_pdiv, mem->dpll_sdiv);
|
|
writel(val, &clk->dpll_con0);
|
|
while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set EPLL */
|
|
writel(EPLL_CON2_VAL, &clk->epll_con2);
|
|
writel(EPLL_CON1_VAL, &clk->epll_con1);
|
|
val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
|
|
writel(val, &clk->epll_con0);
|
|
while ((readl(&clk->epll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set CPLL */
|
|
writel(CPLL_CON1_VAL, &clk->cpll_con1);
|
|
val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
|
|
writel(val, &clk->cpll_con0);
|
|
while ((readl(&clk->cpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set IPLL */
|
|
writel(IPLL_CON1_VAL, &clk->ipll_con1);
|
|
val = set_pll(mem->ipll_mdiv, mem->ipll_pdiv, mem->ipll_sdiv);
|
|
writel(val, &clk->ipll_con0);
|
|
while ((readl(&clk->ipll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set VPLL */
|
|
writel(VPLL_CON1_VAL, &clk->vpll_con1);
|
|
val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
|
|
writel(val, &clk->vpll_con0);
|
|
while ((readl(&clk->vpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set BPLL */
|
|
writel(BPLL_CON1_VAL, &clk->bpll_con1);
|
|
val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
|
|
writel(val, &clk->bpll_con0);
|
|
while ((readl(&clk->bpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set SPLL */
|
|
writel(SPLL_CON1_VAL, &clk->spll_con1);
|
|
val = set_pll(mem->spll_mdiv, mem->spll_pdiv, mem->spll_sdiv);
|
|
writel(val, &clk->spll_con0);
|
|
while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
/* Set RPLL */
|
|
writel(RPLL_CON2_VAL, &clk->rpll_con2);
|
|
writel(RPLL_CON1_VAL, &clk->rpll_con1);
|
|
val = set_pll(mem->rpll_mdiv, mem->rpll_pdiv, mem->rpll_sdiv);
|
|
writel(val, &clk->rpll_con0);
|
|
while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0)
|
|
;
|
|
|
|
writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0);
|
|
writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1);
|
|
|
|
writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
|
|
writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
|
|
writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
|
|
writel(CLK_SRC_TOP7_VAL, &clk->src_top7);
|
|
|
|
writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
|
|
writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
|
|
writel(CLK_DIV_TOP2_VAL, &clk->div_top2);
|
|
|
|
writel(0, &clk->src_top10);
|
|
writel(0, &clk->src_top11);
|
|
writel(0, &clk->src_top12);
|
|
|
|
writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
|
|
writel(CLK_SRC_TOP4_VAL, &clk->src_top4);
|
|
writel(CLK_SRC_TOP5_VAL, &clk->src_top5);
|
|
|
|
/* DISP1 BLK CLK SELECTION */
|
|
writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp10);
|
|
writel(CLK_DIV_DISP1_0_VAL, &clk->div_disp10);
|
|
|
|
/* AUDIO BLK */
|
|
writel(AUDIO0_SEL_EPLL, &clk->src_mau);
|
|
writel(DIV_MAU_VAL, &clk->div_mau);
|
|
|
|
/* FSYS */
|
|
writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
|
|
writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
|
|
writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
|
|
writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
|
|
|
|
writel(CLK_SRC_ISP_VAL, &clk->src_isp);
|
|
writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
|
|
writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
|
|
|
|
writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
|
|
writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
|
|
|
|
writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
|
|
writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
|
|
writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
|
|
writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
|
|
writel(CLK_DIV_PERIC4_VAL, &clk->div_peric4);
|
|
|
|
writel(CLK_DIV_CPERI1_VAL, &clk->div_cperi1);
|
|
|
|
writel(CLK_DIV2_RATIO, &clk->clkdiv2_ratio);
|
|
writel(CLK_DIV4_RATIO, &clk->clkdiv4_ratio);
|
|
writel(CLK_DIV_G2D, &clk->div_g2d);
|
|
|
|
writel(CLK_SRC_TOP6_VAL, &clk->src_top6);
|
|
writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
|
|
writel(CLK_SRC_KFC_VAL, &clk->src_kfc);
|
|
}
|
|
|
|
void system_clock_init(void)
|
|
{
|
|
if (proid_is_exynos5420() || proid_is_exynos5800())
|
|
exynos5420_system_clock_init();
|
|
else
|
|
exynos5250_system_clock_init();
|
|
}
|
|
|
|
void clock_init_dp_clock(void)
|
|
{
|
|
struct exynos5_clock *clk =
|
|
(struct exynos5_clock *)samsung_get_base_clock();
|
|
|
|
/* DP clock enable */
|
|
setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
|
|
|
|
/* We run DP at 267 Mhz */
|
|
setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
|
|
}
|
|
|
|
/*
|
|
* Set clock divisor value for booting from EMMC.
|
|
* Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
|
|
*/
|
|
void emmc_boot_clk_div_set(void)
|
|
{
|
|
struct exynos5_clock *clk =
|
|
(struct exynos5_clock *)samsung_get_base_clock();
|
|
unsigned int div_mmc;
|
|
|
|
div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
|
|
div_mmc |= FSYS1_MMC0_DIV_VAL;
|
|
writel(div_mmc, (unsigned int) &clk->div_fsys1);
|
|
}
|