Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-29 16:10:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mvgbe.c
Tony Dinh f0f98758ed net: marvell: mvgbe: Set PHY page 0 before phy_connect 
For most Kirkwood boards, the PHY page is already set to page 0
(in register 22) before phy_connect is invoked. But some board like
the Zyxel NSA310S (which uses the network chip MV88E1318S), the PHY page
is not set to page 0. There seems to be some bad data remained in
register 22 when the uclass MVGBE about to invoke phy_connect().

This patch enables the uclass MVGBE to always set the PHY page to 0
before phy_connect.

For reference, please see this discussion:
[RFC PATCH v2] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe
and PHY driver for DM Ethernet.
https://lists.denx.de/pipermail/u-boot/2022-April/480946.html

This patch has been tested with the following Kirkwood boards:

NSA310S (88F6702, network chip MV88E1318S)
Sheevaplug (88F6281, network chip MV88E1318)
Pogo V4 (88F6192, network chip 88E1116R)
GF Home(88F6281, network chip 88E1116R)
Dreamplug (88F6281, network chip MV88E1318)
Dell Kace M300 (88F6282, network chip MV88E1318) - out of tree u-boot

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-05-02 07:47:26 +02:00

1049 lines
26 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* (C) Copyright 2003
* Ingo Assmus <ingo.assmus@keymile.com>
*
* based on - Driver for MV64360X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <net.h>
#include <malloc.h>
#include <miiphy.h>
#include <wait_bit.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <asm/types.h>
#include <asm/system.h>
#include <asm/byteorder.h>
#include <asm/arch/cpu.h>
#if defined(CONFIG_ARCH_KIRKWOOD)
#include <asm/arch/soc.h>
#elif defined(CONFIG_ARCH_ORION5X)
#include <asm/arch/orion5x.h>
#endif
#include "mvgbe.h"
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_MVGBE_PORTS
# define CONFIG_MVGBE_PORTS {0, 0}
#endif
#define MV_PHY_ADR_REQUEST 0xee
#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
#define MVGBE_PGADR_REG 22
#if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static int smi_wait_ready(struct mvgbe_device *dmvgbe)
{
int ret;
ret = wait_for_bit_le32(&MVGBE_SMI_REG, MVGBE_PHY_SMI_BUSY_MASK, false,
MVGBE_PHY_SMI_TIMEOUT_MS, false);
if (ret) {
printf("Error: SMI busy timeout\n");
return ret;
}
return 0;
}
static int __mvgbe_mdio_read(struct mvgbe_device *dmvgbe, int phy_adr,
int devad, int reg_ofs)
{
struct mvgbe_registers *regs = dmvgbe->regs;
u32 smi_reg;
u32 timeout;
u16 data = 0;
/* Phyadr read request */
if (phy_adr == MV_PHY_ADR_REQUEST &&
reg_ofs == MV_PHY_ADR_REQUEST) {
/* */
data = (u16) (MVGBE_REG_RD(regs->phyadr) & PHYADR_MASK);
return data;
}
/* check parameters */
if (phy_adr > PHYADR_MASK) {
printf("Err..(%s) Invalid PHY address %d\n",
__func__, phy_adr);
return -EFAULT;
}
if (reg_ofs > PHYREG_MASK) {
printf("Err..(%s) Invalid register offset %d\n",
__func__, reg_ofs);
return -EFAULT;
}
/* wait till the SMI is not busy */
if (smi_wait_ready(dmvgbe) < 0)
return -EFAULT;
/* fill the phy address and regiser offset and read opcode */
smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
| (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS)
| MVGBE_PHY_SMI_OPCODE_READ;
/* write the smi register */
MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
/*wait till read value is ready */
timeout = MVGBE_PHY_SMI_TIMEOUT;
do {
/* read smi register */
smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
if (timeout-- == 0) {
printf("Err..(%s) SMI read ready timeout\n",
__func__);
return -EFAULT;
}
} while (!(smi_reg & MVGBE_PHY_SMI_READ_VALID_MASK));
/* Wait for the data to update in the SMI register */
for (timeout = 0; timeout < MVGBE_PHY_SMI_TIMEOUT; timeout++)
;
data = (u16) (MVGBE_REG_RD(MVGBE_SMI_REG) & MVGBE_PHY_SMI_DATA_MASK);
debug("%s:(adr %d, off %d) value= %04x\n", __func__, phy_adr, reg_ofs,
data);
return data;
}
/*
* smi_reg_read - miiphy_read callback function.
*
* Returns 16bit phy register value, or -EFAULT on error
*/
static int smi_reg_read(struct mii_dev *bus, int phy_adr, int devad,
int reg_ofs)
{
#ifdef CONFIG_DM_ETH
struct mvgbe_device *dmvgbe = bus->priv;
#else
struct eth_device *dev = eth_get_dev_by_name(bus->name);
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
#endif
return __mvgbe_mdio_read(dmvgbe, phy_adr, devad, reg_ofs);
}
static int __mvgbe_mdio_write(struct mvgbe_device *dmvgbe, int phy_adr,
int devad, int reg_ofs, u16 data)
{
struct mvgbe_registers *regs = dmvgbe->regs;
u32 smi_reg;
/* Phyadr write request*/
if (phy_adr == MV_PHY_ADR_REQUEST &&
reg_ofs == MV_PHY_ADR_REQUEST) {
MVGBE_REG_WR(regs->phyadr, data);
return 0;
}
/* check parameters */
if (phy_adr > PHYADR_MASK) {
printf("Err..(%s) Invalid phy address\n", __func__);
return -EINVAL;
}
if (reg_ofs > PHYREG_MASK) {
printf("Err..(%s) Invalid register offset\n", __func__);
return -EFAULT;
}
/* wait till the SMI is not busy */
if (smi_wait_ready(dmvgbe) < 0)
return -EFAULT;
/* fill the phy addr and reg offset and write opcode and data */
smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS);
smi_reg |= (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
| (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS);
smi_reg &= ~MVGBE_PHY_SMI_OPCODE_READ;
/* write the smi register */
MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
return 0;
}
/*
* smi_reg_write - miiphy_write callback function.
*
* Returns 0 if write succeed, -EFAULT on error
*/
static int smi_reg_write(struct mii_dev *bus, int phy_adr, int devad,
int reg_ofs, u16 data)
{
#ifdef CONFIG_DM_ETH
struct mvgbe_device *dmvgbe = bus->priv;
#else
struct eth_device *dev = eth_get_dev_by_name(bus->name);
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
#endif
return __mvgbe_mdio_write(dmvgbe, phy_adr, devad, reg_ofs, data);
}
#endif
/* Stop and checks all queues */
static void stop_queue(u32 * qreg)
{
u32 reg_data;
reg_data = readl(qreg);
if (reg_data & 0xFF) {
/* Issue stop command for active channels only */
writel((reg_data << 8), qreg);
/* Wait for all queue activity to terminate. */
do {
/*
* Check port cause register that all queues
* are stopped
*/
reg_data = readl(qreg);
}
while (reg_data & 0xFF);
}
}
/*
* set_access_control - Config address decode parameters for Ethernet unit
*
* This function configures the address decode parameters for the Gigabit
* Ethernet Controller according the given parameters struct.
*
* @regs Register struct pointer.
* @param Address decode parameter struct.
*/
static void set_access_control(struct mvgbe_registers *regs,
struct mvgbe_winparam *param)
{
u32 access_prot_reg;
/* Set access control register */
access_prot_reg = MVGBE_REG_RD(regs->epap);
/* clear window permission */
access_prot_reg &= (~(3 << (param->win * 2)));
access_prot_reg |= (param->access_ctrl << (param->win * 2));
MVGBE_REG_WR(regs->epap, access_prot_reg);
/* Set window Size reg (SR) */
MVGBE_REG_WR(regs->barsz[param->win].size,
(((param->size / 0x10000) - 1) << 16));
/* Set window Base address reg (BA) */
MVGBE_REG_WR(regs->barsz[param->win].bar,
(param->target | param->attrib | param->base_addr));
/* High address remap reg (HARR) */
if (param->win < 4)
MVGBE_REG_WR(regs->ha_remap[param->win], param->high_addr);
/* Base address enable reg (BARER) */
if (param->enable == 1)
MVGBE_REG_BITS_RESET(regs->bare, (1 << param->win));
else
MVGBE_REG_BITS_SET(regs->bare, (1 << param->win));
}
static void set_dram_access(struct mvgbe_registers *regs)
{
struct mvgbe_winparam win_param;
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
/* Set access parameters for DRAM bank i */
win_param.win = i; /* Use Ethernet window i */
/* Window target - DDR */
win_param.target = MVGBE_TARGET_DRAM;
/* Enable full access */
win_param.access_ctrl = EWIN_ACCESS_FULL;
win_param.high_addr = 0;
/* Get bank base and size */
win_param.base_addr = gd->bd->bi_dram[i].start;
win_param.size = gd->bd->bi_dram[i].size;
if (win_param.size == 0)
win_param.enable = 0;
else
win_param.enable = 1; /* Enable the access */
/* Enable DRAM bank */
switch (i) {
case 0:
win_param.attrib = EBAR_DRAM_CS0;
break;
case 1:
win_param.attrib = EBAR_DRAM_CS1;
break;
case 2:
win_param.attrib = EBAR_DRAM_CS2;
break;
case 3:
win_param.attrib = EBAR_DRAM_CS3;
break;
default:
/* invalid bank, disable access */
win_param.enable = 0;
win_param.attrib = 0;
break;
}
/* Set the access control for address window(EPAPR) RD/WR */
set_access_control(regs, &win_param);
}
}
/*
* port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
*
* Go through all the DA filter tables (Unicast, Special Multicast & Other
* Multicast) and set each entry to 0.
*/
static void port_init_mac_tables(struct mvgbe_registers *regs)
{
int table_index;
/* Clear DA filter unicast table (Ex_dFUT) */
for (table_index = 0; table_index < 4; ++table_index)
MVGBE_REG_WR(regs->dfut[table_index], 0);
for (table_index = 0; table_index < 64; ++table_index) {
/* Clear DA filter special multicast table (Ex_dFSMT) */
MVGBE_REG_WR(regs->dfsmt[table_index], 0);
/* Clear DA filter other multicast table (Ex_dFOMT) */
MVGBE_REG_WR(regs->dfomt[table_index], 0);
}
}
/*
* port_uc_addr - This function Set the port unicast address table
*
* This function locates the proper entry in the Unicast table for the
* specified MAC nibble and sets its properties according to function
* parameters.
* This function add/removes MAC addresses from the port unicast address
* table.
*
* @uc_nibble Unicast MAC Address last nibble.
* @option 0 = Add, 1 = remove address.
*
* RETURN: 1 if output succeeded. 0 if option parameter is invalid.
*/
static int port_uc_addr(struct mvgbe_registers *regs, u8 uc_nibble,
int option)
{
u32 unicast_reg;
u32 tbl_offset;
u32 reg_offset;
/* Locate the Unicast table entry */
uc_nibble = (0xf & uc_nibble);
/* Register offset from unicast table base */
tbl_offset = (uc_nibble / 4);
/* Entry offset within the above register */
reg_offset = uc_nibble % 4;
switch (option) {
case REJECT_MAC_ADDR:
/*
* Clear accepts frame bit at specified unicast
* DA table entry
*/
unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
unicast_reg &= (0xFF << (8 * reg_offset));
MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
break;
case ACCEPT_MAC_ADDR:
/* Set accepts frame bit at unicast DA filter table entry */
unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
unicast_reg &= (0xFF << (8 * reg_offset));
unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset));
MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
break;
default:
return 0;
}
return 1;
}
/*
* port_uc_addr_set - This function Set the port Unicast address.
*/
static void port_uc_addr_set(struct mvgbe_device *dmvgbe, u8 *p_addr)
{
struct mvgbe_registers *regs = dmvgbe->regs;
u32 mac_h;
u32 mac_l;
mac_l = (p_addr[4] << 8) | (p_addr[5]);
mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
(p_addr[3] << 0);
MVGBE_REG_WR(regs->macal, mac_l);
MVGBE_REG_WR(regs->macah, mac_h);
/* Accept frames of this address */
port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR);
}
/*
* mvgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
*/
static void mvgbe_init_rx_desc_ring(struct mvgbe_device *dmvgbe)
{
struct mvgbe_rxdesc *p_rx_desc;
int i;
/* initialize the Rx descriptors ring */
p_rx_desc = dmvgbe->p_rxdesc;
for (i = 0; i < RINGSZ; i++) {
p_rx_desc->cmd_sts =
MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
p_rx_desc->buf_size = PKTSIZE_ALIGN;
p_rx_desc->byte_cnt = 0;
p_rx_desc->buf_ptr = dmvgbe->p_rxbuf + i * PKTSIZE_ALIGN;
if (i == (RINGSZ - 1))
p_rx_desc->nxtdesc_p = dmvgbe->p_rxdesc;
else {
p_rx_desc->nxtdesc_p = (struct mvgbe_rxdesc *)
((u32) p_rx_desc + MV_RXQ_DESC_ALIGNED_SIZE);
p_rx_desc = p_rx_desc->nxtdesc_p;
}
}
dmvgbe->p_rxdesc_curr = dmvgbe->p_rxdesc;
}
static int __mvgbe_init(struct mvgbe_device *dmvgbe, u8 *enetaddr,
const char *name)
{
struct mvgbe_registers *regs = dmvgbe->regs;
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \
!defined(CONFIG_PHYLIB) && \
!defined(CONFIG_DM_ETH) && \
defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
int i;
#endif
/* setup RX rings */
mvgbe_init_rx_desc_ring(dmvgbe);
/* Clear the ethernet port interrupts */
MVGBE_REG_WR(regs->ic, 0);
MVGBE_REG_WR(regs->ice, 0);
/* Unmask RX buffer and TX end interrupt */
MVGBE_REG_WR(regs->pim, INT_CAUSE_UNMASK_ALL);
/* Unmask phy and link status changes interrupts */
MVGBE_REG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
set_dram_access(regs);
port_init_mac_tables(regs);
port_uc_addr_set(dmvgbe, enetaddr);
/* Assign port configuration and command. */
MVGBE_REG_WR(regs->pxc, PRT_CFG_VAL);
MVGBE_REG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
MVGBE_REG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
/* Assign port SDMA configuration */
MVGBE_REG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
MVGBE_REG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL);
MVGBE_REG_WR(regs->tqx[0].tqxtbc,
(QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL);
/* Turn off the port/RXUQ bandwidth limitation */
MVGBE_REG_WR(regs->pmtu, 0);
/* Set maximum receive buffer to 9700 bytes */
MVGBE_REG_WR(regs->psc0, MVGBE_MAX_RX_PACKET_9700BYTE
| (MVGBE_REG_RD(regs->psc0) & MRU_MASK));
/* Enable port initially */
MVGBE_REG_BITS_SET(regs->psc0, MVGBE_SERIAL_PORT_EN);
/*
* Set ethernet MTU for leaky bucket mechanism to 0 - this will
* disable the leaky bucket mechanism .
*/
MVGBE_REG_WR(regs->pmtu, 0);
/* Assignment of Rx CRDB of given RXUQ */
MVGBE_REG_WR(regs->rxcdp[RXUQ], (u32) dmvgbe->p_rxdesc_curr);
/* ensure previous write is done before enabling Rx DMA */
isb();
/* Enable port Rx. */
MVGBE_REG_WR(regs->rqc, (1 << RXUQ));
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \
!defined(CONFIG_PHYLIB) && \
!defined(CONFIG_DM_ETH) && \
defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
/* Wait up to 5s for the link status */
for (i = 0; i < 5; i++) {
u16 phyadr;
miiphy_read(name, MV_PHY_ADR_REQUEST,
MV_PHY_ADR_REQUEST, &phyadr);
/* Return if we get link up */
if (miiphy_link(name, phyadr))
return 0;
udelay(1000000);
}
printf("No link on %s\n", name);
return -1;
#endif
return 0;
}
#ifndef CONFIG_DM_ETH
static int mvgbe_init(struct eth_device *dev)
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
return __mvgbe_init(dmvgbe, dmvgbe->dev.enetaddr, dmvgbe->dev.name);
}
#endif
static void __mvgbe_halt(struct mvgbe_device *dmvgbe)
{
struct mvgbe_registers *regs = dmvgbe->regs;
/* Disable all gigE address decoder */
MVGBE_REG_WR(regs->bare, 0x3f);
stop_queue(&regs->tqc);
stop_queue(&regs->rqc);
/* Disable port */
MVGBE_REG_BITS_RESET(regs->psc0, MVGBE_SERIAL_PORT_EN);
/* Set port is not reset */
MVGBE_REG_BITS_RESET(regs->psc1, 1 << 4);
#ifdef CONFIG_SYS_MII_MODE
/* Set MMI interface up */
MVGBE_REG_BITS_RESET(regs->psc1, 1 << 3);
#endif
/* Disable & mask ethernet port interrupts */
MVGBE_REG_WR(regs->ic, 0);
MVGBE_REG_WR(regs->ice, 0);
MVGBE_REG_WR(regs->pim, 0);
MVGBE_REG_WR(regs->peim, 0);
}
#ifndef CONFIG_DM_ETH
static int mvgbe_halt(struct eth_device *dev)
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
__mvgbe_halt(dmvgbe);
return 0;
}
#endif
#ifdef CONFIG_DM_ETH
static int mvgbe_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
port_uc_addr_set(dev_get_priv(dev), pdata->enetaddr);
return 0;
}
#else
static int mvgbe_write_hwaddr(struct eth_device *dev)
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
/* Programs net device MAC address after initialization */
port_uc_addr_set(dmvgbe, dmvgbe->dev.enetaddr);
return 0;
}
#endif
static int __mvgbe_send(struct mvgbe_device *dmvgbe, void *dataptr,
int datasize)
{
struct mvgbe_registers *regs = dmvgbe->regs;
struct mvgbe_txdesc *p_txdesc = dmvgbe->p_txdesc;
void *p = (void *)dataptr;
u32 cmd_sts;
u32 txuq0_reg_addr;
/* Copy buffer if it's misaligned */
if ((u32) dataptr & 0x07) {
if (datasize > PKTSIZE_ALIGN) {
printf("Non-aligned data too large (%d)\n",
datasize);
return -1;
}
memcpy(dmvgbe->p_aligned_txbuf, p, datasize);
p = dmvgbe->p_aligned_txbuf;
}
p_txdesc->cmd_sts = MVGBE_ZERO_PADDING | MVGBE_GEN_CRC;
p_txdesc->cmd_sts |= MVGBE_TX_FIRST_DESC | MVGBE_TX_LAST_DESC;
p_txdesc->cmd_sts |= MVGBE_BUFFER_OWNED_BY_DMA;
p_txdesc->cmd_sts |= MVGBE_TX_EN_INTERRUPT;
p_txdesc->buf_ptr = (u8 *) p;
p_txdesc->byte_cnt = datasize;
/* Set this tc desc as zeroth TXUQ */
txuq0_reg_addr = (u32)&regs->tcqdp[TXUQ];
writel((u32) p_txdesc, txuq0_reg_addr);
/* ensure tx desc writes above are performed before we start Tx DMA */
isb();
/* Apply send command using zeroth TXUQ */
MVGBE_REG_WR(regs->tqc, (1 << TXUQ));
/*
* wait for packet xmit completion
*/
cmd_sts = readl(&p_txdesc->cmd_sts);
while (cmd_sts & MVGBE_BUFFER_OWNED_BY_DMA) {
/* return fail if error is detected */
if ((cmd_sts & (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME)) ==
(MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME) &&
cmd_sts & (MVGBE_UR_ERROR | MVGBE_RL_ERROR)) {
printf("Err..(%s) in xmit packet\n", __func__);
return -1;
}
cmd_sts = readl(&p_txdesc->cmd_sts);
};
return 0;
}
#ifndef CONFIG_DM_ETH
static int mvgbe_send(struct eth_device *dev, void *dataptr, int datasize)
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
return __mvgbe_send(dmvgbe, dataptr, datasize);
}
#endif
static int __mvgbe_recv(struct mvgbe_device *dmvgbe, uchar **packetp)
{
struct mvgbe_rxdesc *p_rxdesc_curr = dmvgbe->p_rxdesc_curr;
u32 cmd_sts;
u32 timeout = 0;
u32 rxdesc_curr_addr;
unsigned char *data;
int rx_bytes = 0;
*packetp = NULL;
/* wait untill rx packet available or timeout */
do {
if (timeout < MVGBE_PHY_SMI_TIMEOUT)
timeout++;
else {
debug("%s time out...\n", __func__);
return -1;
}
} while (readl(&p_rxdesc_curr->cmd_sts) & MVGBE_BUFFER_OWNED_BY_DMA);
if (p_rxdesc_curr->byte_cnt != 0) {
debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n",
__func__, (u32) p_rxdesc_curr->byte_cnt,
(u32) p_rxdesc_curr->buf_ptr,
(u32) p_rxdesc_curr->cmd_sts);
}
/*
* In case received a packet without first/last bits on
* OR the error summary bit is on,
* the packets needs to be dropeed.
*/
cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
if ((cmd_sts &
(MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC))
!= (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC)) {
printf("Err..(%s) Dropping packet spread on"
" multiple descriptors\n", __func__);
} else if (cmd_sts & MVGBE_ERROR_SUMMARY) {
printf("Err..(%s) Dropping packet with errors\n",
__func__);
} else {
/* !!! call higher layer processing */
debug("%s: Sending Received packet to"
" upper layer (net_process_received_packet)\n",
__func__);
data = (p_rxdesc_curr->buf_ptr + RX_BUF_OFFSET);
rx_bytes = (int)(p_rxdesc_curr->byte_cnt -
RX_BUF_OFFSET);
*packetp = data;
}
/*
* free these descriptors and point next in the ring
*/
p_rxdesc_curr->cmd_sts =
MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
p_rxdesc_curr->byte_cnt = 0;
rxdesc_curr_addr = (u32)&dmvgbe->p_rxdesc_curr;
writel((unsigned)p_rxdesc_curr->nxtdesc_p, rxdesc_curr_addr);
return rx_bytes;
}
#ifndef CONFIG_DM_ETH
static int mvgbe_recv(struct eth_device *dev)
{
struct mvgbe_device *dmvgbe = to_mvgbe(dev);
uchar *packet;
int ret;
ret = __mvgbe_recv(dmvgbe, &packet);
if (ret < 0)
return ret;
net_process_received_packet(packet, ret);
return 0;
}
#endif
#if defined(CONFIG_PHYLIB) || defined(CONFIG_DM_ETH)
#if defined(CONFIG_DM_ETH)
static struct phy_device *__mvgbe_phy_init(struct udevice *dev,
struct mii_dev *bus,
phy_interface_t phy_interface,
int phyid)
#else
static struct phy_device *__mvgbe_phy_init(struct eth_device *dev,
struct mii_dev *bus,
phy_interface_t phy_interface,
int phyid)
#endif
{
struct phy_device *phydev;
/* Set phy address of the port */
miiphy_write(dev->name, MV_PHY_ADR_REQUEST, MV_PHY_ADR_REQUEST,
phyid);
/* Make sure the selected PHY page is 0 before connecting */
miiphy_write(dev->name, phyid, MVGBE_PGADR_REG, 0);
phydev = phy_connect(bus, phyid, dev, phy_interface);
if (!phydev) {
printf("phy_connect failed\n");
return NULL;
}
phy_config(phydev);
phy_startup(phydev);
return phydev;
}
#endif /* CONFIG_PHYLIB || CONFIG_DM_ETH */
#if defined(CONFIG_PHYLIB) && !defined(CONFIG_DM_ETH)
int mvgbe_phylib_init(struct eth_device *dev, int phyid)
{
struct mii_dev *bus;
struct phy_device *phydev;
int ret;
bus = mdio_alloc();
if (!bus) {
printf("mdio_alloc failed\n");
return -ENOMEM;
}
bus->read = smi_reg_read;
bus->write = smi_reg_write;
strcpy(bus->name, dev->name);
ret = mdio_register(bus);
if (ret) {
printf("mdio_register failed\n");
free(bus);
return -ENOMEM;
}
phydev = __mvgbe_phy_init(dev, bus, PHY_INTERFACE_MODE_RGMII, phyid);
if (!phydev)
return -ENODEV;
return 0;
}
#endif
static int mvgbe_alloc_buffers(struct mvgbe_device *dmvgbe)
{
dmvgbe->p_rxdesc = memalign(PKTALIGN,
MV_RXQ_DESC_ALIGNED_SIZE * RINGSZ + 1);
if (!dmvgbe->p_rxdesc)
goto error1;
dmvgbe->p_rxbuf = memalign(PKTALIGN,
RINGSZ * PKTSIZE_ALIGN + 1);
if (!dmvgbe->p_rxbuf)
goto error2;
dmvgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN);
if (!dmvgbe->p_aligned_txbuf)
goto error3;
dmvgbe->p_txdesc = memalign(PKTALIGN, sizeof(struct mvgbe_txdesc) + 1);
if (!dmvgbe->p_txdesc)
goto error4;
return 0;
error4:
free(dmvgbe->p_aligned_txbuf);
error3:
free(dmvgbe->p_rxbuf);
error2:
free(dmvgbe->p_rxdesc);
error1:
return -ENOMEM;
}
#ifndef CONFIG_DM_ETH
int mvgbe_initialize(struct bd_info *bis)
{
struct mvgbe_device *dmvgbe;
struct eth_device *dev;
int devnum;
int ret;
u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;
for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) {
/*skip if port is configured not to use */
if (used_ports[devnum] == 0)
continue;
dmvgbe = malloc(sizeof(struct mvgbe_device));
if (!dmvgbe)
return -ENOMEM;
memset(dmvgbe, 0, sizeof(struct mvgbe_device));
ret = mvgbe_alloc_buffers(dmvgbe);
if (ret) {
printf("Err.. %s Failed to allocate memory\n",
__func__);
free(dmvgbe);
return ret;
}
dev = &dmvgbe->dev;
/* must be less than sizeof(dev->name) */
sprintf(dev->name, "egiga%d", devnum);
switch (devnum) {
case 0:
dmvgbe->regs = (void *)MVGBE0_BASE;
break;
#if defined(MVGBE1_BASE)
case 1:
dmvgbe->regs = (void *)MVGBE1_BASE;
break;
#endif
default: /* this should never happen */
printf("Err..(%s) Invalid device number %d\n",
__func__, devnum);
return -1;
}
dev->init = (void *)mvgbe_init;
dev->halt = (void *)mvgbe_halt;
dev->send = (void *)mvgbe_send;
dev->recv = (void *)mvgbe_recv;
dev->write_hwaddr = (void *)mvgbe_write_hwaddr;
eth_register(dev);
#if defined(CONFIG_PHYLIB)
mvgbe_phylib_init(dev, PHY_BASE_ADR + devnum);
#elif defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strlcpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
mdiodev->read = smi_reg_read;
mdiodev->write = smi_reg_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
/* Set phy address of the port */
miiphy_write(dev->name, MV_PHY_ADR_REQUEST,
MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
#endif
}
return 0;
}
#endif
#ifdef CONFIG_DM_ETH
static int mvgbe_port_is_fixed_link(struct mvgbe_device *dmvgbe)
{
return dmvgbe->phyaddr > PHY_MAX_ADDR;
}
static int mvgbe_start(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
int ret;
ret = __mvgbe_init(dmvgbe, pdata->enetaddr, dev->name);
if (ret)
return ret;
if (!mvgbe_port_is_fixed_link(dmvgbe)) {
dmvgbe->phydev = __mvgbe_phy_init(dev, dmvgbe->bus,
dmvgbe->phy_interface,
dmvgbe->phyaddr);
if (!dmvgbe->phydev)
return -ENODEV;
}
return 0;
}
static int mvgbe_send(struct udevice *dev, void *packet, int length)
{
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
return __mvgbe_send(dmvgbe, packet, length);
}
static int mvgbe_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
return __mvgbe_recv(dmvgbe, packetp);
}
static void mvgbe_stop(struct udevice *dev)
{
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
__mvgbe_halt(dmvgbe);
}
static int mvgbe_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
struct mii_dev *bus;
int ret;
ret = mvgbe_alloc_buffers(dmvgbe);
if (ret)
return ret;
dmvgbe->regs = (void __iomem *)pdata->iobase;
bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate MDIO bus\n");
return -ENOMEM;
}
bus->read = smi_reg_read;
bus->write = smi_reg_write;
snprintf(bus->name, sizeof(bus->name), dev->name);
bus->priv = dmvgbe;
dmvgbe->bus = bus;
ret = mdio_register(bus);
if (ret < 0)
return ret;
return 0;
}
static const struct eth_ops mvgbe_ops = {
.start = mvgbe_start,
.send = mvgbe_send,
.recv = mvgbe_recv,
.stop = mvgbe_stop,
.write_hwaddr = mvgbe_write_hwaddr,
};
static int mvgbe_of_to_plat(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
struct mvgbe_device *dmvgbe = dev_get_priv(dev);
void *blob = (void *)gd->fdt_blob;
int node = dev_of_offset(dev);
int fl_node;
int pnode;
unsigned long addr;
pdata->iobase = dev_read_addr(dev);
pdata->phy_interface = -1;
pnode = fdt_node_offset_by_compatible(blob, node,
"marvell,kirkwood-eth-port");
/* Get phy-mode / phy_interface from DT */
pdata->phy_interface = dev_read_phy_mode(dev);
if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
pdata->phy_interface = PHY_INTERFACE_MODE_GMII;
dmvgbe->phy_interface = pdata->phy_interface;
/* fetch 'fixed-link' property */
fl_node = fdt_subnode_offset(blob, pnode, "fixed-link");
if (fl_node != -FDT_ERR_NOTFOUND) {
/* set phy_addr to invalid value for fixed link */
dmvgbe->phyaddr = PHY_MAX_ADDR + 1;
dmvgbe->duplex = fdtdec_get_bool(blob, fl_node, "full-duplex");
dmvgbe->speed = fdtdec_get_int(blob, fl_node, "speed", 0);
} else {
/* Now read phyaddr from DT */
addr = fdtdec_lookup_phandle(blob, pnode, "phy-handle");
if (addr > 0)
dmvgbe->phyaddr = fdtdec_get_int(blob, addr, "reg", 0);
}
return 0;
}
static const struct udevice_id mvgbe_ids[] = {
{ .compatible = "marvell,kirkwood-eth" },
{ }
};
U_BOOT_DRIVER(mvgbe) = {
.name = "mvgbe",
.id = UCLASS_ETH,
.of_match = mvgbe_ids,
.of_to_plat = mvgbe_of_to_plat,
.probe = mvgbe_probe,
.ops = &mvgbe_ops,
.priv_auto = sizeof(struct mvgbe_device),
.plat_auto = sizeof(struct eth_pdata),
};
#endif /* CONFIG_DM_ETH */
Reference in a new issue View git blame Copy permalink