u-boot/board/samsung/smdk5420/smdk5420.c
Sjoerd Simons 68904c8322 ARM: exynos5420: Leave VBUS GPIO configuration up to common code
Since commit 4a271cb1b4 (exynos: usb: Switch USB VBUS GPIOs to be
device tree configured) it's not needed for the board specific files to
turn on the VBUS GPIO by hand as that gets done based on device tree. So
drop the redundant code from the SMDK5420 board file.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22 20:49:41 +09:00

92 lines
1.8 KiB
C

/*
* Copyright (C) 2013 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <i2c.h>
#include <lcd.h>
#include <parade.h>
#include <spi.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/system.h>
#include <asm/arch/dp_info.h>
#include <power/tps65090_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
int exynos_init(void)
{
return 0;
}
#ifdef CONFIG_LCD
static int has_edp_bridge(void)
{
int node;
node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_PARADE_PS8625);
/* No node for bridge in device tree. */
if (node <= 0)
return 0;
/* Default is with bridge ic */
return 1;
}
void exynos_lcd_power_on(void)
{
int ret;
#ifdef CONFIG_POWER_TPS65090
ret = tps65090_init();
if (ret < 0) {
printf("%s: tps65090_init() failed\n", __func__);
return;
}
tps65090_fet_enable(6);
#endif
mdelay(5);
/* TODO(ajaykumar.rs@samsung.com): Use device tree */
gpio_request(EXYNOS5420_GPIO_X35, "edp_slp#");
gpio_direction_output(EXYNOS5420_GPIO_X35, 1); /* EDP_SLP# */
mdelay(10);
gpio_request(EXYNOS5420_GPIO_Y77, "edp_rst#");
gpio_direction_output(EXYNOS5420_GPIO_Y77, 1); /* EDP_RST# */
gpio_request(EXYNOS5420_GPIO_X26, "edp_hpd");
gpio_direction_input(EXYNOS5420_GPIO_X26); /* EDP_HPD */
gpio_set_pull(EXYNOS5420_GPIO_X26, S5P_GPIO_PULL_NONE);
if (has_edp_bridge())
if (parade_init(gd->fdt_blob))
printf("%s: ps8625_init() failed\n", __func__);
}
void exynos_backlight_on(unsigned int onoff)
{
/* For PWM */
gpio_request(EXYNOS5420_GPIO_B20, "backlight_on");
gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_FUNC(0x1));
gpio_set_value(EXYNOS5420_GPIO_B20, 1);
#ifdef CONFIG_POWER_TPS65090
tps65090_fet_enable(1);
#endif
}
#endif
int board_get_revision(void)
{
return 0;
}