mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
c925be73a0
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip
PX30 in a micro Qseven-compatible form-factor.
PX30-µQ7 features:
* CPU: quad-core Cortex-A35
* DRAM: 2GB dual-channel
* eMMC: onboard eMMC
* SD/MMC
* TI DP83825I 10/100Mbps PHY
* USB:
* USB2.0 dual role port
* 3x USB2.0 host via onboard USB2.0 hub
* Display: MIPI-DSI
* Camera: MIPI-CSI
* onboard 2.4GHz WiFi + Bluetooth module
* Companion Controller: on-board additional microcontroller
(STM32 Cortex-M0 or ATtiny):
* RTC
* fan controller
* CAN (only STM32)
The non-U-Boot DTS files are imported from Linux v6.2-rc2.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
100 lines
3 KiB
Text
100 lines
3 KiB
Text
if ROCKCHIP_PX30
|
|
|
|
config TARGET_EVB_PX30
|
|
bool "EVB_PX30"
|
|
help
|
|
This target config option used for below listed px30 boards.
|
|
|
|
EVB_PX30:
|
|
* EVB_PX30 is an evaluation board for Rockchip PX30.
|
|
|
|
config TARGET_ODROID_GO2
|
|
bool "ODROID_GO2"
|
|
|
|
config TARGET_PX30_CORE
|
|
bool "Engicam PX30.Core"
|
|
help
|
|
PX30.Core EDIMM2.2:
|
|
* PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
|
|
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam.
|
|
* PX30.Core needs to mount on top of EDIMM2.2 for creating complete
|
|
PX30.Core EDIMM2.2 Starter Kit.
|
|
|
|
PX30.Core CTOUCH2:
|
|
* PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
|
|
* CTOUCH2.0 is a general purpose Carrier board with capacitive
|
|
touch interface support.
|
|
* PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
|
|
PX30.Core C.TOUCH Carrier board.
|
|
|
|
PX30.Core CTOUCH2-OF10:
|
|
* PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
|
|
* CTOUCH2.0 is a general purpose Carrier board with capacitive
|
|
touch interface support.
|
|
* 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
|
|
* PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
|
|
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
|
|
|
|
config TARGET_RINGNECK_PX30
|
|
bool "Theobroma Systems PX30-µQ7 (Ringneck)"
|
|
help
|
|
The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm,
|
|
MXM-230 connector) system-on-module from Theobroma Systems[1],
|
|
featuring the Rockchip PX30.
|
|
|
|
It provides the following feature set:
|
|
* up to 4GB DDR4
|
|
* up to 128GB on-module eMMC (with 8-bit 1.8V interface)
|
|
* SD card (on a baseboard) via edge connector
|
|
* Fast Ethernet with on-module TI DP83825I PHY
|
|
* MIPI-DSI/LVDS
|
|
* MIPI-CSI
|
|
* USB
|
|
- 1x USB 2.0 dual-role
|
|
- 3x USB 2.0 host
|
|
* on-module companion controller (STM32 Cortex-M0 or ATtiny), implementing:
|
|
- low-power RTC functionality (ISL1208 emulation)
|
|
- fan controller (AMC6821 emulation)
|
|
- USB<->CAN bridge controller (STM32 only)
|
|
* on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi
|
|
* on-module NXP SE05x Secure Element
|
|
|
|
config ROCKCHIP_BOOT_MODE_REG
|
|
default 0xff010200
|
|
|
|
config ROCKCHIP_STIMER_BASE
|
|
default 0xff220020
|
|
|
|
config SYS_SOC
|
|
default "px30"
|
|
|
|
config SYS_MALLOC_F_LEN
|
|
default 0x400
|
|
|
|
config SPL_SERIAL
|
|
default y
|
|
|
|
config TPL_LDSCRIPT
|
|
default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
|
|
|
|
config TPL_TEXT_BASE
|
|
default 0xff0e1000
|
|
|
|
config TPL_STACK
|
|
default 0xff0e4fff
|
|
|
|
config DEBUG_UART_CHANNEL
|
|
int "Mux channel to use for debug UART2/UART3"
|
|
depends on DEBUG_UART_BOARD_INIT
|
|
default 0
|
|
help
|
|
UART2 and UART3 can use two different set of pins to route the output.
|
|
For using the UART for early debugging the route to use needs
|
|
to be declared (0 or 1).
|
|
|
|
source "board/engicam/px30_core/Kconfig"
|
|
source "board/hardkernel/odroid_go2/Kconfig"
|
|
source "board/rockchip/evb_px30/Kconfig"
|
|
source "board/theobroma-systems/ringneck_px30/Kconfig"
|
|
|
|
endif
|