mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
6ab77bb14f
Commit 65cc0e2a65 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
this meant that the value was no longer available to the Makefile. This
caused imxrt to fail to boot. All the other boards that used this
variable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.
This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.
Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
124 lines
4.3 KiB
Makefile
124 lines
4.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/
|
|
quiet_cmd_mkomapsecimg = SECURE $@
|
|
ifneq ($(TI_SECURE_DEV_PKG),)
|
|
ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),)
|
|
ifneq ($(CONFIG_SPL_BUILD),)
|
|
cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
|
|
$(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_SPL_TEXT_BASE) \
|
|
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
|
|
else
|
|
cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
|
|
$(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_TEXT_BASE) \
|
|
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
|
|
endif
|
|
else
|
|
cmd_mkomapsecimg = echo "WARNING:" \
|
|
"$(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh not found." \
|
|
"$@ was NOT secured!"; cp $< $@
|
|
endif
|
|
else
|
|
cmd_mkomapsecimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
|
|
"variable must be defined for TI secure devices. \
|
|
$@ was NOT secured!"; cp $< $@
|
|
endif
|
|
|
|
ifdef CONFIG_SPL_LOAD_FIT
|
|
quiet_cmd_omapsecureimg = SECURE $@
|
|
ifneq ($(TI_SECURE_DEV_PKG),)
|
|
ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
|
|
cmd_omapsecureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
|
|
$< $@ \
|
|
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
|
|
else
|
|
cmd_omapsecureimg = echo "WARNING:" \
|
|
"$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
|
|
"$@ was NOT secured!"; cp $< $@
|
|
endif
|
|
else
|
|
cmd_omapsecureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
|
|
"variable must be defined for TI secure devices." \
|
|
"$@ was NOT secured!"; cp $< $@
|
|
endif
|
|
endif
|
|
|
|
|
|
# Standard X-LOADER target (QPSI, NOR flash)
|
|
u-boot-spl_HS_X-LOADER: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
|
|
# For MLO targets (SD card boot) the final file name that is copied to the SD
|
|
# card FAT partition must be MLO, so we make a copy of the output file to a new
|
|
# file with that name
|
|
u-boot-spl_HS_MLO: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
@if [ -f $@ ]; then \
|
|
cp -f $@ MLO; \
|
|
fi
|
|
|
|
# Standard 2ND target (certain peripheral boot modes)
|
|
u-boot-spl_HS_2ND: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
|
|
# Standard ULO target (certain peripheral boot modes)
|
|
u-boot-spl_HS_ULO: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
|
|
# Standard ISSW target (certain devices, various boot modes), when copied to
|
|
# an SD card FAT partition this file must be called "MLO", we make a copy with
|
|
# this name to make this clear
|
|
u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
@if [ -f $@ ]; then \
|
|
cp -f $@ MLO; \
|
|
fi
|
|
|
|
# For SPI flash on AM335x and AM43xx, these require special byte swap handling
|
|
# so we use the SPI_X-LOADER target instead of X-LOADER and let the
|
|
# create-boot-image.sh script handle that
|
|
u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
|
|
# For supporting single stage boot on keystone, the image is a full u-boot
|
|
# file, not an SPL. This will work for all boot devices, other than SPI
|
|
# flash. On Keystone devices when booting from an SD card FAT partition this
|
|
# file must be called "MLO"
|
|
u-boot_HS_MLO: $(obj)/u-boot.bin
|
|
$(call if_changed,mkomapsecimg)
|
|
@if [ -f $@ ]; then \
|
|
cp -f $@ MLO; \
|
|
fi
|
|
|
|
# For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
|
|
# file, not an SPL. In this case the mkomapsecimg command looks for a
|
|
# u-boot-HS_* prefix
|
|
u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
|
|
$(call if_changed,mkomapsecimg)
|
|
|
|
# For supporting the SPL loading and interpreting of FIT images whose
|
|
# components are pre-processed before being integrated into the FIT image in
|
|
# order to secure them in some way
|
|
ifdef CONFIG_SPL_LOAD_FIT
|
|
|
|
MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
|
|
-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
|
|
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
|
|
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
|
|
|
|
OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
|
|
$(OF_LIST_TARGETS): dtbs
|
|
|
|
%.dtb_HS: %.dtb FORCE
|
|
$(call if_changed,omapsecureimg)
|
|
|
|
u-boot-nodtb_HS.bin: u-boot-nodtb.bin FORCE
|
|
$(call if_changed,omapsecureimg)
|
|
|
|
u-boot_HS.img: u-boot-nodtb_HS.bin u-boot.img $(patsubst %.dtb,%.dtb_HS,$(OF_LIST_TARGETS)) FORCE
|
|
$(call if_changed,mkimage)
|
|
$(Q)if [ -f $@ ]; then \
|
|
cp -f $@ u-boot.img; \
|
|
fi
|
|
|
|
endif
|