mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
85da558762
Commit f11513d997 ("net: phy: realtek: Add tx/rx delay config for
8211e") made the Realtek PHY driver honour the phy-mode DT property,
to set up the proper delay scheme for the RX and TX lines. A similar
change in the kernel revealed that those properties were mostly wrong.
The kernel DTs got updated over the last few months, but we were missing
out on the U-Boot version.
Just sync in the phy-mode properties from the mainline kernel,
v5.17-rc7, to avoid the breaking DT sync that late in the cycle.
This fixes Ethernet operation on the affected boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
206 lines
3.3 KiB
Text
206 lines
3.3 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
|
|
// Based on sun50i-a64-pine64.dts, which is:
|
|
// Copyright (c) 2016 ARM Ltd.
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64-sopine.dtsi"
|
|
|
|
/ {
|
|
model = "SoPine with baseboard";
|
|
compatible = "pine64,sopine-baseboard", "pine64,sopine",
|
|
"allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_vcc1v8: vcc1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
status = "okay";
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
phy-mode = "rgmii-txid";
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
phy-supply = <®_dc1sw>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
hvcc-supply = <®_dldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
ext_rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_vcc1v8>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
mmc-hs200-1_8v;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
®_dc1sw {
|
|
/*
|
|
* Ethernet PHY needs 30ms to properly power up and some more
|
|
* to initialize. 100ms should be plenty of time to finish
|
|
* whole process.
|
|
*/
|
|
regulator-enable-ramp-delay = <100000>;
|
|
regulator-name = "vcc-phy";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-mipi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi";
|
|
};
|
|
|
|
&simplefb_hdmi {
|
|
vcc-hdmi-supply = <®_dldo1>;
|
|
};
|
|
|
|
&sound {
|
|
simple-audio-card,aux-devs = <&codec_analog>;
|
|
simple-audio-card,widgets = "Microphone", "Microphone Jack",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Left DAC", "DACL",
|
|
"Right DAC", "DACR",
|
|
"Headphone Jack", "HP",
|
|
"ADCL", "Left ADC",
|
|
"ADCR", "Right ADC",
|
|
"MIC2", "Microphone Jack";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* On Pi-2 connector */
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* On Euler connector */
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* On Euler connector, RTS/CTS optional */
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|