mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
8f27bf114e
Use device tree to set MAC address of the Ethernet chip. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
334 lines
8.1 KiB
C
334 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2016-2018 Toradex, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/arch-tegra/ap.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <env_internal.h>
|
|
#include <fdt_support.h>
|
|
#include <pci_tegra.h>
|
|
#include <linux/delay.h>
|
|
#include <power/as3722.h>
|
|
#include <power/pmic.h>
|
|
|
|
#include "../common/tdx-common.h"
|
|
#include "pinmux-config-apalis-tk1.h"
|
|
|
|
#define LAN_DEV_OFF_N TEGRA_GPIO(O, 6)
|
|
#define LAN_RESET_N TEGRA_GPIO(S, 2)
|
|
#define FAN_EN TEGRA_GPIO(DD, 2)
|
|
#define LAN_WAKE_N TEGRA_GPIO(O, 5)
|
|
#ifdef CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT
|
|
#define PEX_PERST_N TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
|
|
#define RESET_MOCI_CTRL TEGRA_GPIO(U, 4)
|
|
#endif /* CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT */
|
|
#define VCC_USBH TEGRA_GPIO(T, 6)
|
|
#define VCC_USBH_V1_0 TEGRA_GPIO(N, 5)
|
|
#define VCC_USBO1 TEGRA_GPIO(T, 5)
|
|
#define VCC_USBO1_V1_0 TEGRA_GPIO(N, 4)
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
|
|
NVBOOTTYPE_RECOVERY) {
|
|
printf("USB recovery mode, attempting to boot Toradex Easy "
|
|
"Installer\n");
|
|
env_set("bootdelay", "-2");
|
|
env_set("defargs", "pcie_aspm=off user_debug=30");
|
|
env_set("fdt_high", "");
|
|
env_set("initrd_high", "");
|
|
|
|
env_set("setup", "env set setupargs igb_mac=${ethaddr} "
|
|
"consoleblank=0 no_console_suspend=1 "
|
|
"console=${console},${baudrate}n8 ${memargs}");
|
|
env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet "
|
|
"autoinstall");
|
|
env_set("vidargs", "video=HDMI-A-1:640x480-16@60D");
|
|
env_set("bootcmd", "run setup; env set bootargs ${defargs} "
|
|
"${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000"
|
|
"#config@${soc}-${fdt_module}-${fdt_board}.dtb");
|
|
}
|
|
|
|
/* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */
|
|
gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication");
|
|
gpio_direction_input(TEGRA_GPIO(V, 0));
|
|
if (gpio_get_value(TEGRA_GPIO(V, 0))) {
|
|
/*
|
|
* if using the default device tree for new V1.2 and later HW,
|
|
* use version for older V1.0 and V1.1 HW
|
|
*/
|
|
char *fdt_env = env_get("fdt_module");
|
|
|
|
if (fdt_env && !strcmp(FDT_MODULE, fdt_env)) {
|
|
env_set("fdt_module", FDT_MODULE_V1_0);
|
|
printf("patching fdt_module to " FDT_MODULE_V1_0
|
|
" for older V1.0 and V1.1 HW\n");
|
|
}
|
|
|
|
/* activate USB power enable GPIOs */
|
|
gpio_request(VCC_USBH_V1_0, "VCC_USBH");
|
|
gpio_direction_output(VCC_USBH_V1_0, 1);
|
|
gpio_request(VCC_USBO1_V1_0, "VCC_USBO1");
|
|
gpio_direction_output(VCC_USBO1_V1_0, 1);
|
|
} else {
|
|
/* activate USB power enable GPIOs */
|
|
gpio_request(VCC_USBH, "VCC_USBH");
|
|
gpio_direction_output(VCC_USBH, 1);
|
|
gpio_request(VCC_USBO1, "VCC_USBO1");
|
|
gpio_direction_output(VCC_USBO1, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Model: Toradex Apalis TK1 2GB\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
|
{
|
|
u8 enetaddr[6];
|
|
|
|
/* MAC addr */
|
|
if (eth_env_get_enetaddr("ethaddr", enetaddr)) {
|
|
int err = fdt_find_and_setprop(blob,
|
|
"/pcie@1003000/pci@2,0/ethernet@0,0",
|
|
"local-mac-address", enetaddr, 6, 0);
|
|
|
|
/* Older device trees might have used a different node name */
|
|
if (err < 0)
|
|
err = fdt_find_and_setprop(blob,
|
|
"/pcie@1003000/pci@2,0/pcie@0",
|
|
"local-mac-address", enetaddr, 6, 0);
|
|
|
|
if (err >= 0)
|
|
puts(" MAC address updated...\n");
|
|
}
|
|
|
|
return ft_common_board_setup(blob, bd);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Routine: pinmux_init
|
|
* Description: Do individual peripheral pinmux configs
|
|
*/
|
|
void pinmux_init(void)
|
|
{
|
|
pinmux_clear_tristate_input_clamping();
|
|
|
|
gpio_config_table(apalis_tk1_gpio_inits,
|
|
ARRAY_SIZE(apalis_tk1_gpio_inits));
|
|
|
|
pinmux_config_pingrp_table(apalis_tk1_pingrps,
|
|
ARRAY_SIZE(apalis_tk1_pingrps));
|
|
|
|
pinmux_config_drvgrp_table(apalis_tk1_drvgrps,
|
|
ARRAY_SIZE(apalis_tk1_drvgrps));
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_TEGRA
|
|
/* TODO: Convert to driver model */
|
|
static int as3722_sd_enable(struct udevice *pmic, unsigned int sd)
|
|
{
|
|
int err;
|
|
|
|
if (sd > 6)
|
|
return -EINVAL;
|
|
|
|
err = pmic_clrsetbits(pmic, AS3722_SD_CONTROL, 0, 1 << sd);
|
|
if (err) {
|
|
pr_err("failed to update SD control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* TODO: Convert to driver model */
|
|
static int as3722_ldo_enable(struct udevice *pmic, unsigned int ldo)
|
|
{
|
|
int err;
|
|
u8 ctrl_reg = AS3722_LDO_CONTROL0;
|
|
|
|
if (ldo > 11)
|
|
return -EINVAL;
|
|
|
|
if (ldo > 7) {
|
|
ctrl_reg = AS3722_LDO_CONTROL1;
|
|
ldo -= 8;
|
|
}
|
|
|
|
err = pmic_clrsetbits(pmic, ctrl_reg, 0, 1 << ldo);
|
|
if (err) {
|
|
pr_err("failed to update LDO control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_pcie_board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_PMIC,
|
|
DM_DRIVER_GET(pmic_as3722), &dev);
|
|
if (ret) {
|
|
pr_err("failed to find AS3722 PMIC: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = as3722_sd_enable(dev, 4);
|
|
if (ret < 0) {
|
|
pr_err("failed to enable SD4: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = as3722_sd_set_voltage(dev, 4, 0x24);
|
|
if (ret < 0) {
|
|
pr_err("failed to set SD4 voltage: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio_request(LAN_DEV_OFF_N, "LAN_DEV_OFF_N");
|
|
gpio_request(LAN_RESET_N, "LAN_RESET_N");
|
|
gpio_request(LAN_WAKE_N, "LAN_WAKE_N");
|
|
|
|
#ifdef CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT
|
|
gpio_request(PEX_PERST_N, "PEX_PERST_N");
|
|
gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL");
|
|
#endif /* CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT */
|
|
|
|
return 0;
|
|
}
|
|
|
|
void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
|
|
{
|
|
int index = tegra_pcie_port_index_of_port(port);
|
|
|
|
if (index == 1) { /* I210 Gigabit Ethernet Controller (On-module) */
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_PMIC,
|
|
DM_DRIVER_GET(pmic_as3722),
|
|
&dev);
|
|
if (ret) {
|
|
debug("%s: Failed to find PMIC\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* Reset I210 Gigabit Ethernet Controller */
|
|
gpio_direction_output(LAN_RESET_N, 0);
|
|
|
|
/*
|
|
* Make sure we don't get any back feeding from DEV_OFF_N resp.
|
|
* LAN_WAKE_N
|
|
*/
|
|
gpio_direction_output(LAN_DEV_OFF_N, 0);
|
|
gpio_direction_output(LAN_WAKE_N, 0);
|
|
|
|
/* Make sure LDO9 and LDO10 are initially enabled @ 0V */
|
|
ret = as3722_ldo_enable(dev, 9);
|
|
if (ret < 0) {
|
|
pr_err("failed to enable LDO9: %d\n", ret);
|
|
return;
|
|
}
|
|
ret = as3722_ldo_enable(dev, 10);
|
|
if (ret < 0) {
|
|
pr_err("failed to enable LDO10: %d\n", ret);
|
|
return;
|
|
}
|
|
ret = as3722_ldo_set_voltage(dev, 9, 0x80);
|
|
if (ret < 0) {
|
|
pr_err("failed to set LDO9 voltage: %d\n", ret);
|
|
return;
|
|
}
|
|
ret = as3722_ldo_set_voltage(dev, 10, 0x80);
|
|
if (ret < 0) {
|
|
pr_err("failed to set LDO10 voltage: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
/* Make sure controller gets enabled by disabling DEV_OFF_N */
|
|
gpio_set_value(LAN_DEV_OFF_N, 1);
|
|
|
|
/*
|
|
* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototype
|
|
* V1.0A and sample V1.0B and newer modules
|
|
*/
|
|
ret = as3722_ldo_set_voltage(dev, 9, 0xff);
|
|
if (ret < 0) {
|
|
pr_err("failed to set LDO9 voltage: %d\n", ret);
|
|
return;
|
|
}
|
|
ret = as3722_ldo_set_voltage(dev, 10, 0xff);
|
|
if (ret < 0) {
|
|
pr_err("failed to set LDO10 voltage: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Must be asserted for 100 ms after power and clocks are stable
|
|
*/
|
|
mdelay(100);
|
|
|
|
gpio_set_value(LAN_RESET_N, 1);
|
|
} else if (index == 0) { /* Apalis PCIe */
|
|
#ifdef CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT
|
|
/*
|
|
* Reset PLX PEX 8605 PCIe Switch plus PCIe devices on Apalis
|
|
* Evaluation Board
|
|
*/
|
|
gpio_direction_output(PEX_PERST_N, 0);
|
|
gpio_direction_output(RESET_MOCI_CTRL, 0);
|
|
|
|
/*
|
|
* Must be asserted for 100 ms after power and clocks are stable
|
|
*/
|
|
mdelay(100);
|
|
|
|
gpio_set_value(PEX_PERST_N, 1);
|
|
/*
|
|
* Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed
|
|
* Until 900 us After PEX_PERST# De-assertion
|
|
*/
|
|
mdelay(1);
|
|
gpio_set_value(RESET_MOCI_CTRL, 1);
|
|
#endif /* CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT */
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI_TEGRA */
|
|
|
|
/*
|
|
* Enable/start PWM CPU fan
|
|
*/
|
|
void start_cpu_fan(void)
|
|
{
|
|
gpio_request(FAN_EN, "FAN_EN");
|
|
gpio_direction_output(FAN_EN, 1);
|
|
}
|
|
|
|
/*
|
|
* Backlight off before OS handover
|
|
*/
|
|
void board_preboot_os(void)
|
|
{
|
|
gpio_request(TEGRA_GPIO(BB, 5), "BL_ON");
|
|
gpio_direction_output(TEGRA_GPIO(BB, 5), 0);
|
|
}
|