u-boot/tools/rkcommon.h
Heiko Stübner cfbcdade76 rockchip: mkimage: Allow encoding of loader code in spl images
Rockchip SoCs allow the spl code to be rc4-encoded, not only the
image header, but only newer SoCs allow this encoding to be disabled.

The rk3188 is not part of those and requires its boot code to be
rc4-encoded with the regular key. So add the ability to do this
encoding via a setting on a per-soc basis when building spl images.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00

80 lines
2.3 KiB
C

/*
* (C) Copyright 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _RKCOMMON_H
#define _RKCOMMON_H
enum {
RK_BLK_SIZE = 512,
RK_INIT_OFFSET = 4,
RK_MAX_BOOT_SIZE = 512 << 10,
RK_SPL_HDR_START = RK_INIT_OFFSET * RK_BLK_SIZE,
RK_SPL_HDR_SIZE = 4,
RK_SPL_START = RK_SPL_HDR_START + RK_SPL_HDR_SIZE,
RK_IMAGE_HEADER_LEN = RK_SPL_START,
};
/**
* rkcommon_check_params() - check params
*
* @return 0 if OK, -1 if ERROR.
*/
int rkcommon_check_params(struct image_tool_params *params);
/**
* rkcommon_get_spl_hdr() - get 4-bytes spl hdr for a Rockchip boot image
*
* Rockchip's bootrom requires the spl loader to start with a 4-bytes
* header. The content of this header depends on the chip type.
*/
const char *rkcommon_get_spl_hdr(struct image_tool_params *params);
/**
* rkcommon_get_spl_size() - get spl size for a Rockchip boot image
*
* Different chip may have different sram size. And if we want to jump
* back to the bootrom after spl, we may need to reserve some sram space
* for the bootrom.
* The spl loader size should be sram size minus reserved size(if needed)
*/
int rkcommon_get_spl_size(struct image_tool_params *params);
/**
* rkcommon_set_header() - set up the header for a Rockchip boot image
*
* This sets up a 2KB header which can be interpreted by the Rockchip boot ROM.
*
* @buf: Pointer to header place (must be at least 2KB in size)
* @file_size: Size of the file we want the boot ROM to load, in bytes
* @return 0 if OK, -ENOSPC if too large
*/
int rkcommon_set_header(void *buf, uint file_size,
struct image_tool_params *params);
/**
* rkcommon_need_rc4_spl() - check if rc4 encoded spl is required
*
* Some socs cannot disable the rc4-encryption of the spl binary.
* rc4 encryption is disabled normally except on socs that cannot
* handle unencrypted binaries.
* @return true or false depending on rc4 being required.
*/
bool rkcommon_need_rc4_spl(struct image_tool_params *params);
/**
* rkcommon_rc4_encode_spl() - encode the spl binary
*
* Encrypts the SPL binary using the generic rc4 key as required
* by some socs.
*
* @buf: Pointer to the SPL data (header and SPL binary)
* @offset: offset inside buf to start at
* @size: number of bytes to encode
*/
void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size);
#endif