u-boot/board/freescale/ls1043aqds
Madalin Bucur 564637a360 board/freescale: add the DM_ETH changes for the PPC DPAA platforms
Add the required changes for compiling with DM_ETH on the PPC
DPAA platforms.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03 12:14:28 +05:30
..
ddr.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
ddr.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
eth.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
Kconfig board: Kconfig: Re-Arrangement of PPA firmware and header addresses 2018-06-08 16:43:19 -07:00
ls1043aqds.c board/freescale: add the DM_ETH changes for the PPC DPAA platforms 2020-06-03 12:14:28 +05:30
ls1043aqds_pbi.cfg armv8/ls1043aqds: add LS1043AQDS board support 2015-11-30 09:11:10 -08:00
ls1043aqds_qixis.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1043aqds_rcw_nand.cfg armv8/ls1043aqds/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
ls1043aqds_rcw_sd_ifc.cfg armv8/ls1043aqds/rcw: change core frequency to 1600MHz 2015-12-17 08:52:18 +08:00
ls1043aqds_rcw_sd_qspi.cfg armv8/ls1043aqds: add QSPI support in SD boot 2016-01-27 08:28:55 -08:00
MAINTAINERS Add TFA boot flow for some Layerscape platforms 2018-12-10 17:19:59 -05:00
Makefile armv8: ls1043ardb: SPL size reduction 2017-04-17 09:03:30 -07:00
README armv8: fsl-layerscape: Organize SoC overview at common location 2016-06-03 14:12:50 -07:00

Overview
--------
The LS1043A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043AQDS provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment.

LS1043A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
SoC overview.

 LS1043AQDS board Overview
 -----------------------
 - SERDES Connections, 4 lanes supporting:
      - PCI Express - 3.0
      - SGMII, SGMII 2.5
      - QSGMII
      - SATA 3.0
      - XFI
 - DDR Controller
     - 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s
 -IFC/Local Bus
    - One in-socket 128 MB NOR flash 16-bit data bus
    - One 512 MB NAND flash with ECC support
    - PromJet Port
    - FPGA connection
 - USB 3.0
    - Three high speed USB 3.0 ports
    - First USB 3.0 port configured as Host with Type-A connector
    - The other two USB 3.0 ports configured as OTG with micro-AB connector
 - SDHC port connects directly to an adapter card slot, featuring:
    - Optional clock feedback paths, and optional high-speed voltage translation assistance
    - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
    - eMMC memory devices
 - DSPI: Onboard support for three SPI flash memory devices
 - 4 I2C controllers
 - One SATA onboard connectors
 - UART
   - Two 4-pin serial ports at up to 115.2 Kbit/s
   - Two DB9 D-Type connectors supporting one Serial port each
 - ARM JTAG support

Memory map from core's view
----------------------------
Start Address	End Address	Description		Size
0x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
0x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
0x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
0x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
0x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
0x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
0x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
0x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
0x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB

Booting Options
---------------
a) Promjet Boot
b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot