u-boot/board/sunxi/board.c
Hans de Goede 55410089cb sunxi: video: Add support for LCD panels which need to be configured via i2c
This commits adds support for configuring a a bitbang i2c controller, which
is used on some boards to configure the LCD panel (via i2c).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-20 08:11:57 +01:00

277 lines
7 KiB
C

/*
* (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
* (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
*
* (C) Copyright 2007-2011
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* Some board init for the Allwinner A10-evb board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mmc.h>
#ifdef CONFIG_AXP152_POWER
#include <axp152.h>
#endif
#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
#endif
#ifdef CONFIG_AXP221_POWER
#include <axp221.h>
#endif
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/display.h>
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/usbc.h>
#include <asm/io.h>
#include <linux/usb/musb.h>
#include <net.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
int soft_i2c_gpio_sda;
int soft_i2c_gpio_scl;
#endif
DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
int board_init(void)
{
int id_pfr1;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
debug("id_pfr1: 0x%08x\n", id_pfr1);
/* Generic Timer Extension available? */
if ((id_pfr1 >> 16) & 0xf) {
debug("Setting CNTFRQ\n");
/* CNTFRQ == 24 MHz */
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
}
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
return 0;
}
#ifdef CONFIG_GENERIC_MMC
static void mmc_pinmux_setup(int sdc)
{
unsigned int pin;
switch (sdc) {
case 0:
/* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */
for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
break;
case 1:
/* CMD-PG3, CLK-PG4, D0~D3-PG5-8 */
for (pin = SUNXI_GPG(3); pin <= SUNXI_GPG(8); pin++) {
sunxi_gpio_set_cfgpin(pin, SUN5I_GPG3_SDC1);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
break;
case 2:
/* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
break;
case 3:
/* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */
for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3);
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
break;
default:
printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc);
break;
}
}
int board_mmc_init(bd_t *bis)
{
__maybe_unused struct mmc *mmc0, *mmc1;
__maybe_unused char buf[512];
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
mmc0 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
if (!mmc0)
return -1;
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
mmc1 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
if (!mmc1)
return -1;
#endif
#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
/*
* Both mmc0 and mmc2 are bootable, figure out where we're booting
* from. Try mmc0 first, just like the brom does.
*/
if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
buf[12] = 0;
if (strcmp(&buf[4], "eGON.BT0") == 0)
return 0;
}
/* no bootable card in mmc0, so we must be booting from mmc2, swap */
mmc0->block_dev.dev = 1;
mmc1->block_dev.dev = 0;
#endif
return 0;
}
#endif
void i2c_init_board(void)
{
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
clock_twi_onoff(0, 1);
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
#endif
}
#ifdef CONFIG_SPL_BUILD
void sunxi_board_init(void)
{
int power_failed = 0;
unsigned long ramsize;
#ifdef CONFIG_AXP152_POWER
power_failed = axp152_init();
power_failed |= axp152_set_dcdc2(1400);
power_failed |= axp152_set_dcdc3(1500);
power_failed |= axp152_set_dcdc4(1250);
power_failed |= axp152_set_ldo2(3000);
#endif
#ifdef CONFIG_AXP209_POWER
power_failed |= axp209_init();
power_failed |= axp209_set_dcdc2(1400);
power_failed |= axp209_set_dcdc3(1250);
power_failed |= axp209_set_ldo2(3000);
power_failed |= axp209_set_ldo3(2800);
power_failed |= axp209_set_ldo4(2800);
#endif
#ifdef CONFIG_AXP221_POWER
power_failed = axp221_init();
power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
power_failed |= axp221_set_dcdc2(1200); /* A31:VDD-GPU, A23:VDD-SYS */
power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
#ifdef CONFIG_MACH_SUN6I
power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
#else
power_failed |= axp221_set_dcdc4(0); /* A23:unused */
#endif
power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */
power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
#endif
printf("DRAM:");
ramsize = sunxi_dram_init();
printf(" %lu MiB\n", ramsize >> 20);
if (!ramsize)
hang();
/*
* Only clock up the CPU to full speed if we are reasonably
* assured it's being powered with suitable core voltage
*/
if (!power_failed)
clock_set_pll1(CONFIG_CLK_FULL_SPEED);
else
printf("Failed to set core voltage! Can't set CPU frequency\n");
}
#endif
#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 6,
.ram_bits = 11,
};
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_MUSB_HOST)
.mode = MUSB_HOST,
#else
.mode = MUSB_PERIPHERAL,
#endif
.config = &musb_config,
.power = 250,
.platform_ops = &sunxi_musb_ops,
};
#endif
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
unsigned int sid[4];
if (!getenv("ethaddr") && sunxi_get_sid(sid) == 0 &&
sid[0] != 0 && sid[3] != 0) {
uint8_t mac_addr[6];
mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
mac_addr[1] = (sid[0] >> 0) & 0xff;
mac_addr[2] = (sid[3] >> 24) & 0xff;
mac_addr[3] = (sid[3] >> 16) & 0xff;
mac_addr[4] = (sid[3] >> 8) & 0xff;
mac_addr[5] = (sid[3] >> 0) & 0xff;
eth_setenv_enetaddr("ethaddr", mac_addr);
}
#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
#endif
return 0;
}
#endif
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
return sunxi_simplefb_setup(blob);
#endif
}
#endif /* CONFIG_OF_BOARD_SETUP */