u-boot/arch/powerpc/cpu
Timur Tabi 4905443f1c powerpc/85xx: Add P5040 processor support
Add support for the Freescale P5040 SOC, which is similar to the P5020.
Features of the P5040 are:

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
        support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
    congestion management (QMAN)
    Hardware buffer management for buffer allocation and
    de-allocation (BMAN)
    Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:13 -05:00
..
74xx_7xx unify version_string 2011-07-28 17:22:53 +02:00
mpc5xx serial: Use default_serial_puts() in drivers 2012-10-17 07:55:50 -07:00
mpc5xxx usb: lowlevel interface change to support multiple controllers 2012-10-15 11:54:00 -07:00
mpc8xx serial: mpc8xx: Move serial registration from serial_initialize() 2012-10-15 11:53:49 -07:00
mpc8xxx powerpc/85xx: Add P5040 processor support 2012-10-22 14:31:13 -05:00
mpc83xx MPC83xx, MPC85xx: compile stub cache function 2012-07-21 23:37:48 +02:00
mpc85xx powerpc/85xx: Add P5040 processor support 2012-10-22 14:31:13 -05:00
mpc86xx arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning 2011-12-02 00:16:46 +01:00
mpc512x serial: Remove CONFIG_SERIAL_MULTI from serial drivers 2012-10-15 11:53:58 -07:00
mpc824x mpc82xx: Remove BMW board port 2012-10-17 07:55:50 -07:00
mpc8220 serial: Use default_serial_puts() in drivers 2012-10-17 07:55:50 -07:00
mpc8260 serial: Use default_serial_puts() in drivers 2012-10-17 07:55:50 -07:00
ppc4xx usb: lowlevel interface change to support multiple controllers 2012-10-15 11:54:00 -07:00