u-boot/include/configs/dns325.h
Chris Packham e85f490a47 configs: remove CONFIG_SYS_MVFS
This was being used by some Marvell boards to enable some file system
related features (many of which have already been moved to Kconfig).
Make the future migration of the final 2 or 3 config options easier by
expanding #define CONFIG_SYS_MVFS into the options that it enables and
remove CONFIG_SYS_MVFS.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29 10:37:52 +02:00

129 lines
3.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011
* Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H
/*
* Machine number definition
*/
#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Commands configuration
*/
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_NR_DRAM_BANKS 1
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/* Remove or override few declarations from mv-common.h */
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif
/*
* SATA Driver configuration
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
/*
* RTC driver configuration
*/
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif
/*
* Enable GPI0 support
*/
#define CONFIG_KIRKWOOD_GPIO
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
#endif
#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
#define CONFIG_ENV_ADDR 0xe0000
#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"loadaddr=0x800000\0" \
"autoload=no\0" \
"console=ttyS0,115200\0" \
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
"optargs=\0" \
"bootenv=uEnv.txt\0" \
"importbootenv=echo Importing environment ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
"setbootargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
"root=${bootenvroot} " \
"rootfstype=${bootenvrootfstype}\0" \
"subbootcmd=run setbootargs; " \
"if run bootenvloadimage; then " \
"bootm ${loadaddr};" \
"fi;\0" \
"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
"nandrootfstype=ubifs\0" \
"nandloadimage=nand read ${loadaddr} kernel\0" \
"setnandbootenv=echo Booting from nand ...; " \
"setenv bootenvroot ${nandroot}; " \
"setenv bootenvrootfstype ${nandrootfstype}; " \
"setenv bootenvloadimage ${nandloadimage}\0"
#define CONFIG_BOOTCOMMAND \
"if test -n ${bootenv} && usb start; then " \
"if run loadbootenv; then " \
"echo Loaded environment ${bootenv} from usb;" \
"run importbootenv;" \
"fi;" \
"if test -n ${bootenvcmd}; then " \
"echo Running bootenvcmd ...;" \
"run bootenvcmd;" \
"fi;" \
"fi;" \
"run setnandbootenv subbootcmd;"
#endif /* _CONFIG_DNS325_H */