u-boot/drivers/i2c/tegra_i2c.c
Stephen Warren b4ee081e5a ARM: tegra: fix Tegra186 I2C clock name
The Tegra I2C binding dictates that the clock name for the Tegra I2C clock
be "div-clk" not "i2c". Fix the Tegra186 DT and I2C driver to honor this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 13:47:49 -07:00

582 lines
14 KiB
C

/*
* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
* Copyright (c) 2010-2011 NVIDIA Corporation
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
#ifdef CONFIG_TEGRA186
#include <clk.h>
#include <reset.h>
#else
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/arch-tegra/clk_rst.h>
#endif
#include <asm/arch/gpio.h>
#include <asm/arch-tegra/tegra_i2c.h>
/*
* FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that
* should not be present. These are needed because newer Tegra SoCs support
* only the standard clock/reset APIs, whereas older Tegra SoCs support only
* a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be
* fixed to implement the standard APIs, and all drivers converted to solely
* use the new standard APIs, with no ifdefs.
*/
DECLARE_GLOBAL_DATA_PTR;
enum i2c_type {
TYPE_114,
TYPE_STD,
TYPE_DVC,
};
/* Information about i2c controller */
struct i2c_bus {
int id;
#ifdef CONFIG_TEGRA186
struct reset_ctl reset_ctl;
struct clk clk;
#else
enum periph_id periph_id;
#endif
int speed;
int pinmux_config;
struct i2c_control *control;
struct i2c_ctlr *regs;
enum i2c_type type;
int inited; /* bus is inited */
};
static void set_packet_mode(struct i2c_bus *i2c_bus)
{
u32 config;
config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
if (i2c_bus->type == TYPE_DVC) {
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
writel(config, &dvc->cnfg);
} else {
writel(config, &i2c_bus->regs->cnfg);
/*
* program I2C_SL_CNFG.NEWSL to ENABLE. This fixes probe
* issues, i.e., some slaves may be wrongly detected.
*/
setbits_le32(&i2c_bus->regs->sl_cnfg, I2C_SL_CNFG_NEWSL_MASK);
}
}
static void i2c_reset_controller(struct i2c_bus *i2c_bus)
{
/* Reset I2C controller. */
#ifdef CONFIG_TEGRA186
reset_assert(&i2c_bus->reset_ctl);
udelay(1);
reset_deassert(&i2c_bus->reset_ctl);
udelay(1);
#else
reset_periph(i2c_bus->periph_id, 1);
#endif
/* re-program config register to packet mode */
set_packet_mode(i2c_bus);
}
#ifdef CONFIG_TEGRA186
static int i2c_init_clock(struct i2c_bus *i2c_bus, unsigned rate)
{
int ret;
ret = reset_assert(&i2c_bus->reset_ctl);
if (ret)
return ret;
ret = clk_enable(&i2c_bus->clk);
if (ret)
return ret;
ret = clk_set_rate(&i2c_bus->clk, rate);
if (IS_ERR_VALUE(ret))
return ret;
ret = reset_deassert(&i2c_bus->reset_ctl);
if (ret)
return ret;
return 0;
}
#endif
static void i2c_init_controller(struct i2c_bus *i2c_bus)
{
if (!i2c_bus->speed)
return;
debug("%s: speed=%d\n", __func__, i2c_bus->speed);
/*
* Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
* here, in section 23.3.1, but in fact we seem to need a factor of
* 16 to get the right frequency.
*/
#ifdef CONFIG_TEGRA186
i2c_init_clock(i2c_bus, i2c_bus->speed * 2 * 8);
#else
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
i2c_bus->speed * 2 * 8);
#endif
if (i2c_bus->type == TYPE_114) {
/*
* T114 I2C went to a single clock source for standard/fast and
* HS clock speeds. The new clock rate setting calculation is:
* SCL = CLK_SOURCE.I2C /
* (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) *
* I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1).
*
* NOTE: We do this here, after the initial clock/pll start,
* because if we read the clk_div reg before the controller
* is running, we hang, and we need it for the new calc.
*/
int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16;
unsigned rate = CLK_MULT_STD_FAST_MODE *
(clk_div_stdfst_mode + 1) * i2c_bus->speed * 2;
debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
clk_div_stdfst_mode);
#ifdef CONFIG_TEGRA186
i2c_init_clock(i2c_bus, rate);
#else
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
rate);
#endif
}
/* Reset I2C controller. */
i2c_reset_controller(i2c_bus);
/* Configure I2C controller. */
if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
}
#ifndef CONFIG_TEGRA186
funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config);
#endif
}
static void send_packet_headers(
struct i2c_bus *i2c_bus,
struct i2c_trans_info *trans,
u32 packet_id,
bool end_with_repeated_start)
{
u32 data;
/* prepare header1: Header size = 0 Protocol = I2C, pktType = 0 */
data = PROTOCOL_TYPE_I2C << PKT_HDR1_PROTOCOL_SHIFT;
data |= packet_id << PKT_HDR1_PKT_ID_SHIFT;
data |= i2c_bus->id << PKT_HDR1_CTLR_ID_SHIFT;
writel(data, &i2c_bus->control->tx_fifo);
debug("pkt header 1 sent (0x%x)\n", data);
/* prepare header2 */
data = (trans->num_bytes - 1) << PKT_HDR2_PAYLOAD_SIZE_SHIFT;
writel(data, &i2c_bus->control->tx_fifo);
debug("pkt header 2 sent (0x%x)\n", data);
/* prepare IO specific header: configure the slave address */
data = trans->address << PKT_HDR3_SLAVE_ADDR_SHIFT;
/* Enable Read if it is not a write transaction */
if (!(trans->flags & I2C_IS_WRITE))
data |= PKT_HDR3_READ_MODE_MASK;
if (end_with_repeated_start)
data |= PKT_HDR3_REPEAT_START_MASK;
/* Write I2C specific header */
writel(data, &i2c_bus->control->tx_fifo);
debug("pkt header 3 sent (0x%x)\n", data);
}
static int wait_for_tx_fifo_empty(struct i2c_control *control)
{
u32 count;
int timeout_us = I2C_TIMEOUT_USEC;
while (timeout_us >= 0) {
count = (readl(&control->fifo_status) & TX_FIFO_EMPTY_CNT_MASK)
>> TX_FIFO_EMPTY_CNT_SHIFT;
if (count == I2C_FIFO_DEPTH)
return 1;
udelay(10);
timeout_us -= 10;
}
return 0;
}
static int wait_for_rx_fifo_notempty(struct i2c_control *control)
{
u32 count;
int timeout_us = I2C_TIMEOUT_USEC;
while (timeout_us >= 0) {
count = (readl(&control->fifo_status) & TX_FIFO_FULL_CNT_MASK)
>> TX_FIFO_FULL_CNT_SHIFT;
if (count)
return 1;
udelay(10);
timeout_us -= 10;
}
return 0;
}
static int wait_for_transfer_complete(struct i2c_control *control)
{
int int_status;
int timeout_us = I2C_TIMEOUT_USEC;
while (timeout_us >= 0) {
int_status = readl(&control->int_status);
if (int_status & I2C_INT_NO_ACK_MASK)
return -int_status;
if (int_status & I2C_INT_ARBITRATION_LOST_MASK)
return -int_status;
if (int_status & I2C_INT_XFER_COMPLETE_MASK)
return 0;
udelay(10);
timeout_us -= 10;
}
return -1;
}
static int send_recv_packets(struct i2c_bus *i2c_bus,
struct i2c_trans_info *trans)
{
struct i2c_control *control = i2c_bus->control;
u32 int_status;
u32 words;
u8 *dptr;
u32 local;
uchar last_bytes;
int error = 0;
int is_write = trans->flags & I2C_IS_WRITE;
/* clear status from previous transaction, XFER_COMPLETE, NOACK, etc. */
int_status = readl(&control->int_status);
writel(int_status, &control->int_status);
send_packet_headers(i2c_bus, trans, 1,
trans->flags & I2C_USE_REPEATED_START);
words = DIV_ROUND_UP(trans->num_bytes, 4);
last_bytes = trans->num_bytes & 3;
dptr = trans->buf;
while (words) {
u32 *wptr = (u32 *)dptr;
if (is_write) {
/* deal with word alignment */
if ((words == 1) && last_bytes) {
local = 0;
memcpy(&local, dptr, last_bytes);
} else if ((unsigned long)dptr & 3) {
memcpy(&local, dptr, sizeof(u32));
} else {
local = *wptr;
}
writel(local, &control->tx_fifo);
debug("pkt data sent (0x%x)\n", local);
if (!wait_for_tx_fifo_empty(control)) {
error = -1;
goto exit;
}
} else {
if (!wait_for_rx_fifo_notempty(control)) {
error = -1;
goto exit;
}
/*
* for the last word, we read into our local buffer,
* in case that caller did not provide enough buffer.
*/
local = readl(&control->rx_fifo);
if ((words == 1) && last_bytes)
memcpy(dptr, (char *)&local, last_bytes);
else if ((unsigned long)dptr & 3)
memcpy(dptr, &local, sizeof(u32));
else
*wptr = local;
debug("pkt data received (0x%x)\n", local);
}
words--;
dptr += sizeof(u32);
}
if (wait_for_transfer_complete(control)) {
error = -1;
goto exit;
}
return 0;
exit:
/* error, reset the controller. */
i2c_reset_controller(i2c_bus);
return error;
}
static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len, bool end_with_repeated_start)
{
int error;
struct i2c_trans_info trans_info;
trans_info.address = addr;
trans_info.buf = data;
trans_info.flags = I2C_IS_WRITE;
if (end_with_repeated_start)
trans_info.flags |= I2C_USE_REPEATED_START;
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len)
{
int error;
struct i2c_trans_info trans_info;
trans_info.address = addr | 1;
trans_info.buf = data;
trans_info.flags = 0;
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
{
struct i2c_bus *i2c_bus = dev_get_priv(dev);
i2c_bus->speed = speed;
i2c_init_controller(i2c_bus);
return 0;
}
static int tegra_i2c_probe(struct udevice *dev)
{
struct i2c_bus *i2c_bus = dev_get_priv(dev);
#ifdef CONFIG_TEGRA186
int ret;
#else
const void *blob = gd->fdt_blob;
int node = dev->of_offset;
#endif
bool is_dvc;
i2c_bus->id = dev->seq;
i2c_bus->type = dev_get_driver_data(dev);
i2c_bus->regs = (struct i2c_ctlr *)dev_get_addr(dev);
/*
* We don't have a binding for pinmux yet. Leave it out for now. So
* far no one needs anything other than the default.
*/
#ifdef CONFIG_TEGRA186
ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl);
if (ret) {
error("reset_get_by_name() failed: %d\n", ret);
return ret;
}
ret = clk_get_by_name(dev, "div-clk", &i2c_bus->clk);
if (ret) {
error("clk_get_by_name() failed: %d\n", ret);
return ret;
}
#else
i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
i2c_bus->periph_id = clock_decode_periph_id(blob, node);
/*
* We can't specify the pinmux config in the fdt, so I2C2 will not
* work on Seaboard. It normally has no devices on it anyway.
* You could add in this little hack if you need to use it.
* The correct solution is a pinmux binding in the fdt.
*
* if (i2c_bus->periph_id == PERIPH_ID_I2C2)
* i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
*/
if (i2c_bus->periph_id == -1)
return -EINVAL;
#endif
is_dvc = dev_get_driver_data(dev) == TYPE_DVC;
if (is_dvc) {
i2c_bus->control =
&((struct dvc_ctlr *)i2c_bus->regs)->control;
} else {
i2c_bus->control = &i2c_bus->regs->control;
}
i2c_init_controller(i2c_bus);
debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
#ifndef CONFIG_TEGRA186
i2c_bus->periph_id,
#else
-1,
#endif
i2c_bus->speed);
return 0;
}
/* i2c write version without the register address */
static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
int len, bool end_with_repeated_start)
{
int rc;
debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
debug("write_data: ");
/* use rc for counter */
for (rc = 0; rc < len; ++rc)
debug(" 0x%02x", buffer[rc]);
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
end_with_repeated_start);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
return rc;
}
/* i2c read version without the register address */
static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
int len)
{
int rc;
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
}
debug("i2c_read_data: ");
/* reuse rc for counter*/
for (rc = 0; rc < len; ++rc)
debug(" 0x%02x", buffer[rc]);
debug("\n");
return 0;
}
/* Probe to see if a chip is present. */
static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
uint chip_flags)
{
struct i2c_bus *i2c_bus = dev_get_priv(bus);
int rc;
u8 reg;
/* Shift 7-bit address over for lower-level i2c functions */
rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, &reg, sizeof(reg),
false);
return rc;
}
static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
int nmsgs)
{
struct i2c_bus *i2c_bus = dev_get_priv(bus);
int ret;
debug("i2c_xfer: %d messages\n", nmsgs);
for (; nmsgs > 0; nmsgs--, msg++) {
bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
if (msg->flags & I2C_M_RD) {
ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
msg->len);
} else {
ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
msg->len, next_is_read);
}
if (ret) {
debug("i2c_write: error sending\n");
return -EREMOTEIO;
}
}
return 0;
}
int tegra_i2c_get_dvc_bus(struct udevice **busp)
{
struct udevice *bus;
for (uclass_first_device(UCLASS_I2C, &bus);
bus;
uclass_next_device(&bus)) {
if (dev_get_driver_data(bus) == TYPE_DVC) {
*busp = bus;
return 0;
}
}
return -ENODEV;
}
static const struct dm_i2c_ops tegra_i2c_ops = {
.xfer = tegra_i2c_xfer,
.probe_chip = tegra_i2c_probe_chip,
.set_bus_speed = tegra_i2c_set_bus_speed,
};
static const struct udevice_id tegra_i2c_ids[] = {
{ .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
{ .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
{ .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
{ }
};
U_BOOT_DRIVER(i2c_tegra) = {
.name = "i2c_tegra",
.id = UCLASS_I2C,
.of_match = tegra_i2c_ids,
.probe = tegra_i2c_probe,
.priv_auto_alloc_size = sizeof(struct i2c_bus),
.ops = &tegra_i2c_ops,
};