u-boot/include/configs/gazerbeam.h
Tom Rini 54f80dd290 Convert CONFIG_HOSTNAME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_GATEWAYIP
   CONFIG_HOSTNAME
   CONFIG_IPADDR
   CONFIG_NETMASK
   CONFIG_ROOTPATH
   CONFIG_SERVERIP
   CONFIG_UBOOTPATH

To do this, we introduce a CONFIG_USE_ form of each of the above and
change include/env_default.h to test for that to be set before setting a
value. Further, we don't want to stringify the IP address related values
as they are now properly strings via Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

72 lines
1.7 KiB
C

/*
* (C) Copyright 2015
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* DDR Setup
*/
#define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */
/* TODO: Check: Can this be unified with CFG_SYS_SDRAM_BASE? */
#define CFG_SYS_DDR_SDRAM_BASE CFG_SYS_SDRAM_BASE
/*
* Memory test
* TODO: Migrate!
*/
/*
* The reserved memory
*/
/*
* Initial RAM Base Address Setup
*/
#define CFG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
/*
* FLASH on the Local Bus
*/
#define CFG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */
#define CFG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*
* Miscellaneous configurable options
*/
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
/*
* Environment Configuration
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
"u-boot=u-boot.bin\0" \
"kernel_addr=1000000\0" \
"fdt_addr=C00000\0" \
"fdtfile=hrcon.dtb\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
" +${filesize};cp.b ${fileaddr} " \
__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
#endif /* __CONFIG_H */