u-boot/include/configs/kontron_sl28.h
Michael Walle 7bc683afda board: sl28: rename include guard macro
Avoid name clashes with an include file on board level.

Signed-off-by: Michael Walle <michael@walle.cc>
2022-06-20 15:52:45 +08:00

83 lines
2.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef __SL28_CONFIG_H
#define __SL28_CONFIG_H
#include <asm/arch/stream_id_lsch3.h>
#include <asm/arch/config.h>
#include <asm/arch/soc.h>
/* we don't use hwconfig but this has to be defined.. */
#define HWCONFIG_BUFFER_SIZE 256
/* we don't have secure memory unless we have a BL31 */
#ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
#undef CONFIG_SYS_MEM_RESERVE_SECURE
#endif
/* DDR */
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL
#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
/* early stack pointer */
/* SMP */
#define CPU_RELEASE_ADDR secondary_boot_addr
/* generic timer */
/* early heap for SPL DM */
#define CONFIG_MALLOC_F_ADDR CONFIG_SYS_FSL_OCRAM_BASE
/* serial port */
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4)
/* SPL */
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
/* GUID for capsule updatable firmware image */
#define KONTRON_SL28_FIT_IMAGE_GUID \
EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
/* environment */
/* see include/configs/ti_armv7_common.h */
#define ENV_MEM_LAYOUT_SETTINGS \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
"fdt_addr_r=0x88000000\0" \
"bootm_size=0x10000000\0" \
"pxefile_addr_r=0x80100000\0" \
"scriptaddr=0x80000000\0" \
"ramdisk_addr_r=0x88080000\0"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(NVME, nvme, 0) \
func(USB, usb, 0) \
func(SCSI, scsi, 0) \
func(DHCP, dhcp, 0) \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
"env_addr=0x203e0004\0" \
"envload=env import -d -b ${env_addr}\0" \
"install_rcw=source 20200000\0" \
"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
"dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
"u-boot-env raw 0x3e0000 0x20000\0" \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif /* __SL28_CONFIG_H */