u-boot/drivers/usb/host/ehci-exynos.c
Troy Kisky 127efc4fe8 usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.
This paramter will later be used to initialize OTG ports in
host or device mode.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-10-20 23:46:27 +02:00

189 lines
4.3 KiB
C

/*
* SAMSUNG EXYNOS USB HOST EHCI Controller
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Vivek Gautam <gautam.vivek@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <asm-generic/errno.h>
#include <linux/compat.h>
#include "ehci.h"
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
/**
* Contains pointers to register base addresses
* for the usb controller.
*/
struct exynos_ehci {
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
struct fdt_gpio_state vbus_gpio;
};
static struct exynos_ehci exynos;
#ifdef CONFIG_OF_CONTROL
static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
{
fdt_addr_t addr;
unsigned int node;
int depth;
node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
if (node <= 0) {
debug("EHCI: Can't get device node for ehci\n");
return -ENODEV;
}
/*
* Get the base address for EHCI controller from the device node
*/
addr = fdtdec_get_addr(blob, node, "reg");
if (addr == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register address\n");
return -ENXIO;
}
exynos->hcd = (struct ehci_hccr *)addr;
/* Vbus gpio */
fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
depth = 0;
node = fdtdec_next_compatible_subnode(blob, node,
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
if (node <= 0) {
debug("EHCI: Can't get device node for usb-phy controller\n");
return -ENODEV;
}
/*
* Get the base address for usbphy from the device node
*/
exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
"reg");
if (exynos->usb == NULL) {
debug("Can't get the usbphy register address\n");
return -ENXIO;
}
return 0;
}
#endif
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
setbits_le32(&usb->usbphyctrl0,
/* Setting up the ref freq */
(CLK_24MHZ << 16) |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(10);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits_le32(&usb->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 |
EHCICTRL_ENAINCR16);
}
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
/*
* EHCI-initialization
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct exynos_ehci *ctx = &exynos;
#ifdef CONFIG_OF_CONTROL
if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
debug("Unable to parse device tree for ehci-exynos\n");
return -ENODEV;
}
#else
ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
#endif
#ifdef CONFIG_OF_CONTROL
/* setup the Vbus gpio here */
if (!fdtdec_setup_gpio(&ctx->vbus_gpio))
gpio_direction_output(ctx->vbus_gpio.gpio, 1);
#endif
setup_usb_phy(ctx->usb);
*hccr = ctx->hcd;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the EHCI host controller.
*/
int ehci_hcd_stop(int index)
{
struct exynos_ehci *ctx = &exynos;
reset_usb_phy(ctx->usb);
return 0;
}