mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
1c68d01eea
Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
704 lines
18 KiB
C
704 lines
18 KiB
C
/*
|
|
* Copyright 2009-2012 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <hwconfig.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/fsl_dtsec.h>
|
|
#include <asm/fsl_tgec.h>
|
|
#include <asm/fsl_memac.h>
|
|
|
|
#include "fm.h"
|
|
|
|
static struct eth_device *devlist[NUM_FM_PORTS];
|
|
static int num_controllers;
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
|
|
|
|
#define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \
|
|
TBIANA_FULL_DUPLEX)
|
|
|
|
#define TBIANA_SGMII_ACK 0x4001
|
|
|
|
#define TBICR_SETTINGS (TBICR_ANEG_ENABLE | TBICR_RESTART_ANEG | \
|
|
TBICR_FULL_DUPLEX | TBICR_SPEED1_SET)
|
|
|
|
/* Configure the TBI for SGMII operation */
|
|
static void dtsec_configure_serdes(struct fm_eth *priv)
|
|
{
|
|
#ifdef CONFIG_SYS_FMAN_V3
|
|
u32 value;
|
|
struct mii_dev bus;
|
|
bus.priv = priv->mac->phyregs;
|
|
|
|
/* SGMII IF mode + AN enable */
|
|
value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
|
|
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
|
|
|
|
/* Dev ability according to SGMII specification */
|
|
value = PHY_SGMII_DEV_ABILITY_SGMII;
|
|
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
|
|
|
|
/* Adjust link timer for SGMII -
|
|
1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
|
|
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
|
|
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
|
|
|
|
/* Restart AN */
|
|
value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
|
|
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
|
|
#else
|
|
struct dtsec *regs = priv->mac->base;
|
|
struct tsec_mii_mng *phyregs = priv->mac->phyregs;
|
|
|
|
/*
|
|
* Access TBI PHY registers at given TSEC register offset as
|
|
* opposed to the register offset used for external PHY accesses
|
|
*/
|
|
tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0, TBI_TBICON,
|
|
TBICON_CLK_SELECT);
|
|
tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0, TBI_ANA,
|
|
TBIANA_SGMII_ACK);
|
|
tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0,
|
|
TBI_CR, TBICR_SETTINGS);
|
|
#endif
|
|
}
|
|
|
|
static void dtsec_init_phy(struct eth_device *dev)
|
|
{
|
|
struct fm_eth *fm_eth = dev->priv;
|
|
#ifndef CONFIG_SYS_FMAN_V3
|
|
struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
|
|
|
|
/* Assign a Physical address to the TBI */
|
|
out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE);
|
|
#endif
|
|
|
|
if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
|
|
dtsec_configure_serdes(fm_eth);
|
|
}
|
|
|
|
static int tgec_is_fibre(struct eth_device *dev)
|
|
{
|
|
struct fm_eth *fm = dev->priv;
|
|
char phyopt[20];
|
|
|
|
sprintf(phyopt, "fsl_fm%d_xaui_phy", fm->fm_index + 1);
|
|
|
|
return hwconfig_arg_cmp(phyopt, "xfi");
|
|
}
|
|
#endif
|
|
|
|
static u16 muram_readw(u16 *addr)
|
|
{
|
|
u32 base = (u32)addr & ~0x3;
|
|
u32 val32 = *(u32 *)base;
|
|
int byte_pos;
|
|
u16 ret;
|
|
|
|
byte_pos = (u32)addr & 0x3;
|
|
if (byte_pos)
|
|
ret = (u16)(val32 & 0x0000ffff);
|
|
else
|
|
ret = (u16)((val32 & 0xffff0000) >> 16);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void muram_writew(u16 *addr, u16 val)
|
|
{
|
|
u32 base = (u32)addr & ~0x3;
|
|
u32 org32 = *(u32 *)base;
|
|
u32 val32;
|
|
int byte_pos;
|
|
|
|
byte_pos = (u32)addr & 0x3;
|
|
if (byte_pos)
|
|
val32 = (org32 & 0xffff0000) | val;
|
|
else
|
|
val32 = (org32 & 0x0000ffff) | ((u32)val << 16);
|
|
|
|
*(u32 *)base = val32;
|
|
}
|
|
|
|
static void bmi_rx_port_disable(struct fm_bmi_rx_port *rx_port)
|
|
{
|
|
int timeout = 1000000;
|
|
|
|
clrbits_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_EN);
|
|
|
|
/* wait until the rx port is not busy */
|
|
while ((in_be32(&rx_port->fmbm_rst) & FMBM_RST_BSY) && timeout--)
|
|
;
|
|
}
|
|
|
|
static void bmi_rx_port_init(struct fm_bmi_rx_port *rx_port)
|
|
{
|
|
/* set BMI to independent mode, Rx port disable */
|
|
out_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_IM);
|
|
/* clear FOF in IM case */
|
|
out_be32(&rx_port->fmbm_rim, 0);
|
|
/* Rx frame next engine -RISC */
|
|
out_be32(&rx_port->fmbm_rfne, NIA_ENG_RISC | NIA_RISC_AC_IM_RX);
|
|
/* Rx command attribute - no order, MR[3] = 1 */
|
|
clrbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_ORDER | FMBM_RFCA_MR_MASK);
|
|
setbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_MR(4));
|
|
/* enable Rx statistic counters */
|
|
out_be32(&rx_port->fmbm_rstc, FMBM_RSTC_EN);
|
|
/* disable Rx performance counters */
|
|
out_be32(&rx_port->fmbm_rpc, 0);
|
|
}
|
|
|
|
static void bmi_tx_port_disable(struct fm_bmi_tx_port *tx_port)
|
|
{
|
|
int timeout = 1000000;
|
|
|
|
clrbits_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_EN);
|
|
|
|
/* wait until the tx port is not busy */
|
|
while ((in_be32(&tx_port->fmbm_tst) & FMBM_TST_BSY) && timeout--)
|
|
;
|
|
}
|
|
|
|
static void bmi_tx_port_init(struct fm_bmi_tx_port *tx_port)
|
|
{
|
|
/* set BMI to independent mode, Tx port disable */
|
|
out_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_IM);
|
|
/* Tx frame next engine -RISC */
|
|
out_be32(&tx_port->fmbm_tfne, NIA_ENG_RISC | NIA_RISC_AC_IM_TX);
|
|
out_be32(&tx_port->fmbm_tfene, NIA_ENG_RISC | NIA_RISC_AC_IM_TX);
|
|
/* Tx command attribute - no order, MR[3] = 1 */
|
|
clrbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_ORDER | FMBM_TFCA_MR_MASK);
|
|
setbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_MR(4));
|
|
/* enable Tx statistic counters */
|
|
out_be32(&tx_port->fmbm_tstc, FMBM_TSTC_EN);
|
|
/* disable Tx performance counters */
|
|
out_be32(&tx_port->fmbm_tpc, 0);
|
|
}
|
|
|
|
static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
|
|
{
|
|
struct fm_port_global_pram *pram;
|
|
u32 pram_page_offset;
|
|
void *rx_bd_ring_base;
|
|
void *rx_buf_pool;
|
|
struct fm_port_bd *rxbd;
|
|
struct fm_port_qd *rxqd;
|
|
struct fm_bmi_rx_port *bmi_rx_port = fm_eth->rx_port;
|
|
int i;
|
|
|
|
/* alloc global parameter ram at MURAM */
|
|
pram = (struct fm_port_global_pram *)fm_muram_alloc(fm_eth->fm_index,
|
|
FM_PRAM_SIZE, FM_PRAM_ALIGN);
|
|
fm_eth->rx_pram = pram;
|
|
|
|
/* parameter page offset to MURAM */
|
|
pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
|
|
|
|
/* enable global mode- snooping data buffers and BDs */
|
|
pram->mode = PRAM_MODE_GLOBAL;
|
|
|
|
/* init the Rx queue descriptor pionter */
|
|
pram->rxqd_ptr = pram_page_offset + 0x20;
|
|
|
|
/* set the max receive buffer length, power of 2 */
|
|
muram_writew(&pram->mrblr, MAX_RXBUF_LOG2);
|
|
|
|
/* alloc Rx buffer descriptors from main memory */
|
|
rx_bd_ring_base = malloc(sizeof(struct fm_port_bd)
|
|
* RX_BD_RING_SIZE);
|
|
if (!rx_bd_ring_base)
|
|
return 0;
|
|
memset(rx_bd_ring_base, 0, sizeof(struct fm_port_bd)
|
|
* RX_BD_RING_SIZE);
|
|
|
|
/* alloc Rx buffer from main memory */
|
|
rx_buf_pool = malloc(MAX_RXBUF_LEN * RX_BD_RING_SIZE);
|
|
if (!rx_buf_pool)
|
|
return 0;
|
|
memset(rx_buf_pool, 0, MAX_RXBUF_LEN * RX_BD_RING_SIZE);
|
|
|
|
/* save them to fm_eth */
|
|
fm_eth->rx_bd_ring = rx_bd_ring_base;
|
|
fm_eth->cur_rxbd = rx_bd_ring_base;
|
|
fm_eth->rx_buf = rx_buf_pool;
|
|
|
|
/* init Rx BDs ring */
|
|
rxbd = (struct fm_port_bd *)rx_bd_ring_base;
|
|
for (i = 0; i < RX_BD_RING_SIZE; i++) {
|
|
rxbd->status = RxBD_EMPTY;
|
|
rxbd->len = 0;
|
|
rxbd->buf_ptr_hi = 0;
|
|
rxbd->buf_ptr_lo = (u32)rx_buf_pool + i * MAX_RXBUF_LEN;
|
|
rxbd++;
|
|
}
|
|
|
|
/* set the Rx queue descriptor */
|
|
rxqd = &pram->rxqd;
|
|
muram_writew(&rxqd->gen, 0);
|
|
muram_writew(&rxqd->bd_ring_base_hi, 0);
|
|
rxqd->bd_ring_base_lo = (u32)rx_bd_ring_base;
|
|
muram_writew(&rxqd->bd_ring_size, sizeof(struct fm_port_bd)
|
|
* RX_BD_RING_SIZE);
|
|
muram_writew(&rxqd->offset_in, 0);
|
|
muram_writew(&rxqd->offset_out, 0);
|
|
|
|
/* set IM parameter ram pointer to Rx Frame Queue ID */
|
|
out_be32(&bmi_rx_port->fmbm_rfqid, pram_page_offset);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int fm_eth_tx_port_parameter_init(struct fm_eth *fm_eth)
|
|
{
|
|
struct fm_port_global_pram *pram;
|
|
u32 pram_page_offset;
|
|
void *tx_bd_ring_base;
|
|
struct fm_port_bd *txbd;
|
|
struct fm_port_qd *txqd;
|
|
struct fm_bmi_tx_port *bmi_tx_port = fm_eth->tx_port;
|
|
int i;
|
|
|
|
/* alloc global parameter ram at MURAM */
|
|
pram = (struct fm_port_global_pram *)fm_muram_alloc(fm_eth->fm_index,
|
|
FM_PRAM_SIZE, FM_PRAM_ALIGN);
|
|
fm_eth->tx_pram = pram;
|
|
|
|
/* parameter page offset to MURAM */
|
|
pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
|
|
|
|
/* enable global mode- snooping data buffers and BDs */
|
|
pram->mode = PRAM_MODE_GLOBAL;
|
|
|
|
/* init the Tx queue descriptor pionter */
|
|
pram->txqd_ptr = pram_page_offset + 0x40;
|
|
|
|
/* alloc Tx buffer descriptors from main memory */
|
|
tx_bd_ring_base = malloc(sizeof(struct fm_port_bd)
|
|
* TX_BD_RING_SIZE);
|
|
if (!tx_bd_ring_base)
|
|
return 0;
|
|
memset(tx_bd_ring_base, 0, sizeof(struct fm_port_bd)
|
|
* TX_BD_RING_SIZE);
|
|
/* save it to fm_eth */
|
|
fm_eth->tx_bd_ring = tx_bd_ring_base;
|
|
fm_eth->cur_txbd = tx_bd_ring_base;
|
|
|
|
/* init Tx BDs ring */
|
|
txbd = (struct fm_port_bd *)tx_bd_ring_base;
|
|
for (i = 0; i < TX_BD_RING_SIZE; i++) {
|
|
txbd->status = TxBD_LAST;
|
|
txbd->len = 0;
|
|
txbd->buf_ptr_hi = 0;
|
|
txbd->buf_ptr_lo = 0;
|
|
}
|
|
|
|
/* set the Tx queue decriptor */
|
|
txqd = &pram->txqd;
|
|
muram_writew(&txqd->bd_ring_base_hi, 0);
|
|
txqd->bd_ring_base_lo = (u32)tx_bd_ring_base;
|
|
muram_writew(&txqd->bd_ring_size, sizeof(struct fm_port_bd)
|
|
* TX_BD_RING_SIZE);
|
|
muram_writew(&txqd->offset_in, 0);
|
|
muram_writew(&txqd->offset_out, 0);
|
|
|
|
/* set IM parameter ram pointer to Tx Confirmation Frame Queue ID */
|
|
out_be32(&bmi_tx_port->fmbm_tcfqid, pram_page_offset);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int fm_eth_init(struct fm_eth *fm_eth)
|
|
{
|
|
|
|
if (!fm_eth_rx_port_parameter_init(fm_eth))
|
|
return 0;
|
|
|
|
if (!fm_eth_tx_port_parameter_init(fm_eth))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int fm_eth_startup(struct fm_eth *fm_eth)
|
|
{
|
|
struct fsl_enet_mac *mac;
|
|
mac = fm_eth->mac;
|
|
|
|
/* Rx/TxBDs, Rx/TxQDs, Rx buff and parameter ram init */
|
|
if (!fm_eth_init(fm_eth))
|
|
return 0;
|
|
/* setup the MAC controller */
|
|
mac->init_mac(mac);
|
|
|
|
/* For some reason we need to set SPEED_100 */
|
|
if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) ||
|
|
(fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) &&
|
|
mac->set_if_mode)
|
|
mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100);
|
|
|
|
/* init bmi rx port, IM mode and disable */
|
|
bmi_rx_port_init(fm_eth->rx_port);
|
|
/* init bmi tx port, IM mode and disable */
|
|
bmi_tx_port_init(fm_eth->tx_port);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void fmc_tx_port_graceful_stop_enable(struct fm_eth *fm_eth)
|
|
{
|
|
struct fm_port_global_pram *pram;
|
|
|
|
pram = fm_eth->tx_pram;
|
|
/* graceful stop transmission of frames */
|
|
pram->mode |= PRAM_MODE_GRACEFUL_STOP;
|
|
sync();
|
|
}
|
|
|
|
static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth)
|
|
{
|
|
struct fm_port_global_pram *pram;
|
|
|
|
pram = fm_eth->tx_pram;
|
|
/* re-enable transmission of frames */
|
|
pram->mode &= ~PRAM_MODE_GRACEFUL_STOP;
|
|
sync();
|
|
}
|
|
|
|
static int fm_eth_open(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
struct fm_eth *fm_eth;
|
|
struct fsl_enet_mac *mac;
|
|
#ifdef CONFIG_PHYLIB
|
|
int ret;
|
|
#endif
|
|
|
|
fm_eth = (struct fm_eth *)dev->priv;
|
|
mac = fm_eth->mac;
|
|
|
|
/* setup the MAC address */
|
|
if (dev->enetaddr[0] & 0x01) {
|
|
printf("%s: MacAddress is multcast address\n", __func__);
|
|
return 1;
|
|
}
|
|
mac->set_mac_addr(mac, dev->enetaddr);
|
|
|
|
/* enable bmi Rx port */
|
|
setbits_be32(&fm_eth->rx_port->fmbm_rcfg, FMBM_RCFG_EN);
|
|
/* enable MAC rx/tx port */
|
|
mac->enable_mac(mac);
|
|
/* enable bmi Tx port */
|
|
setbits_be32(&fm_eth->tx_port->fmbm_tcfg, FMBM_TCFG_EN);
|
|
/* re-enable transmission of frame */
|
|
fmc_tx_port_graceful_stop_disable(fm_eth);
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
ret = phy_startup(fm_eth->phydev);
|
|
if (ret) {
|
|
printf("%s: Could not initialize\n", fm_eth->phydev->dev->name);
|
|
return ret;
|
|
}
|
|
#else
|
|
fm_eth->phydev->speed = SPEED_1000;
|
|
fm_eth->phydev->link = 1;
|
|
fm_eth->phydev->duplex = DUPLEX_FULL;
|
|
#endif
|
|
|
|
/* set the MAC-PHY mode */
|
|
mac->set_if_mode(mac, fm_eth->enet_if, fm_eth->phydev->speed);
|
|
|
|
if (!fm_eth->phydev->link)
|
|
printf("%s: No link.\n", fm_eth->phydev->dev->name);
|
|
|
|
return fm_eth->phydev->link ? 0 : -1;
|
|
}
|
|
|
|
static void fm_eth_halt(struct eth_device *dev)
|
|
{
|
|
struct fm_eth *fm_eth;
|
|
struct fsl_enet_mac *mac;
|
|
|
|
fm_eth = (struct fm_eth *)dev->priv;
|
|
mac = fm_eth->mac;
|
|
|
|
/* graceful stop the transmission of frames */
|
|
fmc_tx_port_graceful_stop_enable(fm_eth);
|
|
/* disable bmi Tx port */
|
|
bmi_tx_port_disable(fm_eth->tx_port);
|
|
/* disable MAC rx/tx port */
|
|
mac->disable_mac(mac);
|
|
/* disable bmi Rx port */
|
|
bmi_rx_port_disable(fm_eth->rx_port);
|
|
|
|
phy_shutdown(fm_eth->phydev);
|
|
}
|
|
|
|
static int fm_eth_send(struct eth_device *dev, void *buf, int len)
|
|
{
|
|
struct fm_eth *fm_eth;
|
|
struct fm_port_global_pram *pram;
|
|
struct fm_port_bd *txbd, *txbd_base;
|
|
u16 offset_in;
|
|
int i;
|
|
|
|
fm_eth = (struct fm_eth *)dev->priv;
|
|
pram = fm_eth->tx_pram;
|
|
txbd = fm_eth->cur_txbd;
|
|
|
|
/* find one empty TxBD */
|
|
for (i = 0; txbd->status & TxBD_READY; i++) {
|
|
udelay(100);
|
|
if (i > 0x1000) {
|
|
printf("%s: Tx buffer not ready\n", dev->name);
|
|
return 0;
|
|
}
|
|
}
|
|
/* setup TxBD */
|
|
txbd->buf_ptr_hi = 0;
|
|
txbd->buf_ptr_lo = (u32)buf;
|
|
txbd->len = len;
|
|
sync();
|
|
txbd->status = TxBD_READY | TxBD_LAST;
|
|
sync();
|
|
|
|
/* update TxQD, let RISC to send the packet */
|
|
offset_in = muram_readw(&pram->txqd.offset_in);
|
|
offset_in += sizeof(struct fm_port_bd);
|
|
if (offset_in >= muram_readw(&pram->txqd.bd_ring_size))
|
|
offset_in = 0;
|
|
muram_writew(&pram->txqd.offset_in, offset_in);
|
|
sync();
|
|
|
|
/* wait for buffer to be transmitted */
|
|
for (i = 0; txbd->status & TxBD_READY; i++) {
|
|
udelay(100);
|
|
if (i > 0x10000) {
|
|
printf("%s: Tx error\n", dev->name);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* advance the TxBD */
|
|
txbd++;
|
|
txbd_base = (struct fm_port_bd *)fm_eth->tx_bd_ring;
|
|
if (txbd >= (txbd_base + TX_BD_RING_SIZE))
|
|
txbd = txbd_base;
|
|
/* update current txbd */
|
|
fm_eth->cur_txbd = (void *)txbd;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int fm_eth_recv(struct eth_device *dev)
|
|
{
|
|
struct fm_eth *fm_eth;
|
|
struct fm_port_global_pram *pram;
|
|
struct fm_port_bd *rxbd, *rxbd_base;
|
|
u16 status, len;
|
|
u8 *data;
|
|
u16 offset_out;
|
|
|
|
fm_eth = (struct fm_eth *)dev->priv;
|
|
pram = fm_eth->rx_pram;
|
|
rxbd = fm_eth->cur_rxbd;
|
|
status = rxbd->status;
|
|
|
|
while (!(status & RxBD_EMPTY)) {
|
|
if (!(status & RxBD_ERROR)) {
|
|
data = (u8 *)rxbd->buf_ptr_lo;
|
|
len = rxbd->len;
|
|
NetReceive(data, len);
|
|
} else {
|
|
printf("%s: Rx error\n", dev->name);
|
|
return 0;
|
|
}
|
|
|
|
/* clear the RxBDs */
|
|
rxbd->status = RxBD_EMPTY;
|
|
rxbd->len = 0;
|
|
sync();
|
|
|
|
/* advance RxBD */
|
|
rxbd++;
|
|
rxbd_base = (struct fm_port_bd *)fm_eth->rx_bd_ring;
|
|
if (rxbd >= (rxbd_base + RX_BD_RING_SIZE))
|
|
rxbd = rxbd_base;
|
|
/* read next status */
|
|
status = rxbd->status;
|
|
|
|
/* update RxQD */
|
|
offset_out = muram_readw(&pram->rxqd.offset_out);
|
|
offset_out += sizeof(struct fm_port_bd);
|
|
if (offset_out >= muram_readw(&pram->rxqd.bd_ring_size))
|
|
offset_out = 0;
|
|
muram_writew(&pram->rxqd.offset_out, offset_out);
|
|
sync();
|
|
}
|
|
fm_eth->cur_rxbd = (void *)rxbd;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
|
|
{
|
|
struct fsl_enet_mac *mac;
|
|
int num;
|
|
void *base, *phyregs = NULL;
|
|
|
|
num = fm_eth->num;
|
|
|
|
#ifdef CONFIG_SYS_FMAN_V3
|
|
if (fm_eth->type == FM_ETH_10G_E)
|
|
num += 8;
|
|
base = ®->memac[num].fm_memac;
|
|
phyregs = ®->memac[num].fm_memac_mdio;
|
|
#else
|
|
/* Get the mac registers base address */
|
|
if (fm_eth->type == FM_ETH_1G_E) {
|
|
base = ®->mac_1g[num].fm_dtesc;
|
|
phyregs = ®->mac_1g[num].fm_mdio.miimcfg;
|
|
} else {
|
|
base = ®->mac_10g[num].fm_10gec;
|
|
phyregs = ®->mac_10g[num].fm_10gec_mdio;
|
|
}
|
|
#endif
|
|
|
|
/* alloc mac controller */
|
|
mac = malloc(sizeof(struct fsl_enet_mac));
|
|
if (!mac)
|
|
return 0;
|
|
memset(mac, 0, sizeof(struct fsl_enet_mac));
|
|
|
|
/* save the mac to fm_eth struct */
|
|
fm_eth->mac = mac;
|
|
|
|
#ifdef CONFIG_SYS_FMAN_V3
|
|
init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
|
|
#else
|
|
if (fm_eth->type == FM_ETH_1G_E)
|
|
init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
|
|
else
|
|
init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int init_phy(struct eth_device *dev)
|
|
{
|
|
struct fm_eth *fm_eth = dev->priv;
|
|
struct phy_device *phydev = NULL;
|
|
u32 supported;
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
if (fm_eth->type == FM_ETH_1G_E)
|
|
dtsec_init_phy(dev);
|
|
|
|
if (fm_eth->bus) {
|
|
phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev,
|
|
fm_eth->enet_if);
|
|
}
|
|
|
|
if (!phydev) {
|
|
printf("Failed to connect\n");
|
|
return -1;
|
|
}
|
|
|
|
if (fm_eth->type == FM_ETH_1G_E) {
|
|
supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full);
|
|
} else {
|
|
supported = SUPPORTED_10000baseT_Full;
|
|
|
|
if (tgec_is_fibre(dev))
|
|
phydev->port = PORT_FIBRE;
|
|
}
|
|
|
|
phydev->supported &= supported;
|
|
phydev->advertising = phydev->supported;
|
|
|
|
fm_eth->phydev = phydev;
|
|
|
|
phy_config(phydev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)
|
|
{
|
|
struct eth_device *dev;
|
|
struct fm_eth *fm_eth;
|
|
int i, num = info->num;
|
|
|
|
/* alloc eth device */
|
|
dev = (struct eth_device *)malloc(sizeof(struct eth_device));
|
|
if (!dev)
|
|
return 0;
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
|
|
/* alloc the FMan ethernet private struct */
|
|
fm_eth = (struct fm_eth *)malloc(sizeof(struct fm_eth));
|
|
if (!fm_eth)
|
|
return 0;
|
|
memset(fm_eth, 0, sizeof(struct fm_eth));
|
|
|
|
/* save off some things we need from the info struct */
|
|
fm_eth->fm_index = info->index - 1; /* keep as 0 based for muram */
|
|
fm_eth->num = num;
|
|
fm_eth->type = info->type;
|
|
|
|
fm_eth->rx_port = (void *)®->port[info->rx_port_id - 1].fm_bmi;
|
|
fm_eth->tx_port = (void *)®->port[info->tx_port_id - 1].fm_bmi;
|
|
|
|
/* set the ethernet max receive length */
|
|
fm_eth->max_rx_len = MAX_RXBUF_LEN;
|
|
|
|
/* init global mac structure */
|
|
if (!fm_eth_init_mac(fm_eth, reg))
|
|
return 0;
|
|
|
|
/* keep same as the manual, we call FMAN1, FMAN2, DTSEC1, DTSEC2, etc */
|
|
if (fm_eth->type == FM_ETH_1G_E)
|
|
sprintf(dev->name, "FM%d@DTSEC%d", info->index, num + 1);
|
|
else
|
|
sprintf(dev->name, "FM%d@TGEC%d", info->index, num + 1);
|
|
|
|
devlist[num_controllers++] = dev;
|
|
dev->iobase = 0;
|
|
dev->priv = (void *)fm_eth;
|
|
dev->init = fm_eth_open;
|
|
dev->halt = fm_eth_halt;
|
|
dev->send = fm_eth_send;
|
|
dev->recv = fm_eth_recv;
|
|
fm_eth->dev = dev;
|
|
fm_eth->bus = info->bus;
|
|
fm_eth->phyaddr = info->phy_addr;
|
|
fm_eth->enet_if = info->enet_if;
|
|
|
|
/* startup the FM im */
|
|
if (!fm_eth_startup(fm_eth))
|
|
return 0;
|
|
|
|
if (init_phy(dev))
|
|
return 0;
|
|
|
|
/* clear the ethernet address */
|
|
for (i = 0; i < 6; i++)
|
|
dev->enetaddr[i] = 0;
|
|
eth_register(dev);
|
|
|
|
return 1;
|
|
}
|