mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 15:23:07 +00:00
0f9258228e
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
289 lines
7.2 KiB
C
289 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dwmmc.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/dwmmc.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm-generic/errno.h>
|
|
|
|
#define DWMMC_MAX_CH_NUM 4
|
|
#define DWMMC_MAX_FREQ 52000000
|
|
#define DWMMC_MIN_FREQ 400000
|
|
#define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001
|
|
#define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001
|
|
|
|
/* Exynos implmentation specific drver private data */
|
|
struct dwmci_exynos_priv_data {
|
|
u32 sdr_timing;
|
|
};
|
|
|
|
/*
|
|
* Function used as callback function to initialise the
|
|
* CLKSEL register for every mmc channel.
|
|
*/
|
|
static void exynos_dwmci_clksel(struct dwmci_host *host)
|
|
{
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing);
|
|
}
|
|
|
|
unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
|
|
{
|
|
unsigned long sclk;
|
|
int8_t clk_div;
|
|
|
|
/*
|
|
* Since SDCLKIN is divided inside controller by the DIVRATIO
|
|
* value set in the CLKSEL register, we need to use the same output
|
|
* clock value to calculate the CLKDIV value.
|
|
* as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
|
|
*/
|
|
clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
|
|
& DWMCI_DIVRATIO_MASK) + 1;
|
|
sclk = get_mmc_clk(host->dev_index);
|
|
|
|
/*
|
|
* Assume to know divider value.
|
|
* When clock unit is broken, need to set "host->div"
|
|
*/
|
|
return sclk / clk_div / (host->div + 1);
|
|
}
|
|
|
|
static void exynos_dwmci_board_init(struct dwmci_host *host)
|
|
{
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
|
|
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
|
|
dwmci_writel(host, EMMCP_SEND0, 0);
|
|
dwmci_writel(host, EMMCP_CTRL0,
|
|
MPSCTRL_SECURE_READ_BIT |
|
|
MPSCTRL_SECURE_WRITE_BIT |
|
|
MPSCTRL_NON_SECURE_READ_BIT |
|
|
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
|
|
}
|
|
|
|
/* Set to timing value at initial time */
|
|
if (priv->sdr_timing)
|
|
exynos_dwmci_clksel(host);
|
|
}
|
|
|
|
static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
|
|
{
|
|
unsigned int div;
|
|
unsigned long freq, sclk;
|
|
struct dwmci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (host->bus_hz)
|
|
freq = host->bus_hz;
|
|
else
|
|
freq = DWMMC_MAX_FREQ;
|
|
|
|
/* request mmc clock vlaue of 52MHz. */
|
|
sclk = get_mmc_clk(index);
|
|
div = DIV_ROUND_UP(sclk, freq);
|
|
/* set the clock divisor for mmc */
|
|
set_mmc_clk(index, div);
|
|
|
|
host->name = "EXYNOS DWMMC";
|
|
#ifdef CONFIG_EXYNOS5420
|
|
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
|
|
#endif
|
|
host->board_init = exynos_dwmci_board_init;
|
|
|
|
if (!priv->sdr_timing) {
|
|
if (index == 0)
|
|
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
|
|
else if (index == 2)
|
|
priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
|
|
}
|
|
|
|
host->caps = MMC_MODE_DDR_52MHz;
|
|
host->clksel = exynos_dwmci_clksel;
|
|
host->dev_index = index;
|
|
host->get_mmc_clk = exynos_dwmci_get_clk;
|
|
/* Add the mmc channel to be registered with mmc core */
|
|
if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
|
|
printf("DWMMC%d registration failed\n", index);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function adds the mmc channel to be registered with mmc core.
|
|
* index - mmc channel number.
|
|
* regbase - register base address of mmc channel specified in 'index'.
|
|
* bus_width - operating bus width of mmc channel specified in 'index'.
|
|
* clksel - value to be written into CLKSEL register in case of FDT.
|
|
* NULL in case od non-FDT.
|
|
*/
|
|
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
|
|
{
|
|
struct dwmci_host *host = NULL;
|
|
struct dwmci_exynos_priv_data *priv;
|
|
|
|
host = malloc(sizeof(struct dwmci_host));
|
|
if (!host) {
|
|
error("dwmci_host malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
|
|
if (!priv) {
|
|
error("dwmci_exynos_priv_data malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
host->ioaddr = (void *)regbase;
|
|
host->buswidth = bus_width;
|
|
|
|
if (clksel)
|
|
priv->sdr_timing = clksel;
|
|
|
|
host->priv = priv;
|
|
|
|
return exynos_dwmci_core_init(host, index);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
|
|
|
|
static int do_dwmci_init(struct dwmci_host *host)
|
|
{
|
|
int index, flag, err;
|
|
|
|
index = host->dev_index;
|
|
|
|
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
|
|
err = exynos_pinmux_config(host->dev_id, flag);
|
|
if (err) {
|
|
printf("DWMMC%d not configure\n", index);
|
|
return err;
|
|
}
|
|
|
|
return exynos_dwmci_core_init(host, index);
|
|
}
|
|
|
|
static int exynos_dwmci_get_config(const void *blob, int node,
|
|
struct dwmci_host *host)
|
|
{
|
|
int err = 0;
|
|
u32 base, timing[3];
|
|
struct dwmci_exynos_priv_data *priv;
|
|
|
|
priv = malloc(sizeof(struct dwmci_exynos_priv_data));
|
|
if (!priv) {
|
|
error("dwmci_exynos_priv_data malloc fail!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Extract device id for each mmc channel */
|
|
host->dev_id = pinmux_decode_periph_id(blob, node);
|
|
|
|
host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
|
|
if (host->dev_index == host->dev_id)
|
|
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
|
|
|
|
/* Get the bus width from the device node */
|
|
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
|
|
if (host->buswidth <= 0) {
|
|
printf("DWMMC%d: Can't get bus-width\n", host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the base address from the device node */
|
|
base = fdtdec_get_addr(blob, node, "reg");
|
|
if (!base) {
|
|
printf("DWMMC%d: Can't get base address\n", host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
host->ioaddr = (void *)base;
|
|
|
|
/* Extract the timing info from the node */
|
|
err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
|
|
if (err) {
|
|
printf("DWMMC%d: Can't get sdr-timings for devider\n",
|
|
host->dev_index);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
|
|
DWMCI_SET_DRV_CLK(timing[1]) |
|
|
DWMCI_SET_DIV_RATIO(timing[2]));
|
|
|
|
/* sdr_timing didn't assigned anything, use the default value */
|
|
if (!priv->sdr_timing) {
|
|
if (host->dev_index == 0)
|
|
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
|
|
else if (host->dev_index == 2)
|
|
priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
|
|
}
|
|
|
|
host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
|
|
host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
|
|
host->div = fdtdec_get_int(blob, node, "div", 0);
|
|
|
|
host->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dwmci_process_node(const void *blob,
|
|
int node_list[], int count)
|
|
{
|
|
struct dwmci_host *host;
|
|
int i, node, err;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
node = node_list[i];
|
|
if (node <= 0)
|
|
continue;
|
|
host = &dwmci_host[i];
|
|
err = exynos_dwmci_get_config(blob, node, host);
|
|
if (err) {
|
|
printf("%s: failed to decode dev %d\n", __func__, i);
|
|
return err;
|
|
}
|
|
|
|
do_dwmci_init(host);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int exynos_dwmmc_init(const void *blob)
|
|
{
|
|
int compat_id;
|
|
int node_list[DWMMC_MAX_CH_NUM];
|
|
int boot_dev_node;
|
|
int err = 0, count;
|
|
|
|
compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
|
|
|
|
count = fdtdec_find_aliases_for_id(blob, "mmc",
|
|
compat_id, node_list, DWMMC_MAX_CH_NUM);
|
|
|
|
/* For DWMMC always set boot device as mmc 0 */
|
|
if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) {
|
|
boot_dev_node = node_list[2];
|
|
node_list[2] = node_list[0];
|
|
node_list[0] = boot_dev_node;
|
|
}
|
|
|
|
err = exynos_dwmci_process_node(blob, node_list, count);
|
|
|
|
return err;
|
|
}
|
|
#endif
|