u-boot/arch/nds32/lib/board.c
Joe Hershberger d2eaec6006 net: Remove the bd* parameter from net stack functions
This value is not used by the network stack and is available in the
global data, so stop passing it around.  For the one legacy function
that still expects it (init op on old Ethernet drivers) pass in the
global pointer version directly to avoid changing that interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
2015-04-18 11:11:11 -06:00

398 lines
9.7 KiB
C

/*
* (C) Copyright 2002-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
#include <serial.h>
#include <nand.h>
#include <onenand_uboot.h>
#include <mmc.h>
#include <asm/sections.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
#endif
ulong monitor_flash_len;
/*
* Init Utilities
*/
#if !defined(CONFIG_BAUDRATE)
#define CONFIG_BAUDRATE 38400
#endif
static int init_baudrate(void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
return 0;
}
/*
* WARNING: this code looks "cleaner" than the PowerPC version, but
* has the disadvantage that you either get nothing, or everything.
* On PowerPC, you might see "DRAM: " before the system hangs - which
* gives a simple yet clear indication which part of the
* initialization if failing.
*/
static int display_dram_config(void)
{
int i;
#ifdef DEBUG
puts("RAM Configuration:\n");
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
print_size(gd->bd->bi_dram[i].size, "\n");
}
#else
ulong size = 0;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
size += gd->bd->bi_dram[i].size;
puts("DRAM: ");
print_size(size, "\n");
#endif
return 0;
}
#ifndef CONFIG_SYS_NO_FLASH
static void display_flash_config(ulong size)
{
puts("Flash: ");
print_size(size, "\n");
}
#endif /* CONFIG_SYS_NO_FLASH */
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
#include <pci.h>
static int nds32_pci_init(void)
{
pci_init();
return 0;
}
#endif /* CONFIG_CMD_PCI || CONFIG_PCI */
#if defined(CONFIG_PMU) || defined(CONFIG_PCU)
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
static int pmu_init(void)
{
#if defined(CONFIG_FTPMU010_POWER)
#ifdef __NDS32_N1213_43U1H__ /* AG101: internal definition in toolchain */
ftpmu010_sdram_clk_disable(CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS);
ftpmu010_mfpsr_select_dev(FTPMU010_MFPSR_AC97CLKSEL);
ftpmu010_sdramhtc_set(CONFIG_SYS_FTPMU010_SDRAMHTC);
#endif /* __NDS32_N1213_43U1H__ */
#endif
return 0;
}
#endif
#endif
/*
* Breathe some life into the board...
*
* Initialize a serial port as console, and carry out some hardware
* tests.
*
* The first part of initialization is running from Flash memory;
* its main purpose is to initialize the RAM so that we
* can relocate the monitor code to RAM.
*/
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
* requirements are just _too_ different. To get rid of the resulting
* mess of board dependent #ifdef'ed code we now make the whole
* initialization sequence configurable to the user.
*
* The requirements for any new initalization function is simple: it
* receives a pointer to the "global data" structure as it's only
* argument, and returns an integer return code, where 0 means
* "continue" and != 0 means "fatal error, hang the system".
*/
typedef int (init_fnc_t)(void);
void __dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
void dram_init_banksize(void)
__attribute__((weak, alias("__dram_init_banksize")));
init_fnc_t *init_sequence[] = {
#if defined(CONFIG_ARCH_CPU_INIT)
arch_cpu_init, /* basic arch cpu dependent setup */
#endif
#if defined(CONFIG_PMU) || defined(CONFIG_PCU)
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
pmu_init,
#endif
#endif
board_init, /* basic board dependent setup */
#if defined(CONFIG_USE_IRQ)
interrupt_init, /* set up exceptions */
#endif
timer_init, /* initialize timer */
env_init, /* initialize environment */
init_baudrate, /* initialze baudrate settings */
serial_init, /* serial communications setup */
console_init_f, /* stage 1 init of console */
#if defined(CONFIG_DISPLAY_BOARDINFO)
checkboard, /* display board info */
#endif
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
dram_init, /* configure available RAM banks */
display_dram_config,
NULL,
};
void board_init_f(ulong bootflag)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
gd_t *id;
ulong addr, addr_sp;
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
gd->mon_len = (unsigned int)(&__bss_end) - (unsigned int)(&_start);
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0)
hang();
}
debug("monitor len: %08lX\n", gd->mon_len);
/*
* Ram is setup, size stored in gd !!
*/
debug("ramsize: %08lX\n", gd->ram_size);
addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
/* round down to next 4 kB limit */
addr &= ~(4096 - 1);
debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
gd->fb_base = CONFIG_FB_ADDR;
#else
/* reserve memory for LCD display (always full pages) */
addr = lcd_setmem(addr);
gd->fb_base = addr;
#endif /* CONFIG_FB_ADDR */
#endif /* CONFIG_LCD */
/*
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
*/
addr -= gd->mon_len;
addr &= ~(4096 - 1);
debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
/*
* reserve memory for malloc() arena
*/
addr_sp = addr - TOTAL_MALLOC_LEN;
debug("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
/*
* (permanently) allocate a Board Info struct
* and a permanent copy of the "global" data
*/
addr_sp -= GENERATED_BD_INFO_SIZE;
bd = (bd_t *) addr_sp;
gd->bd = bd;
memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
debug("Reserving %zu Bytes for Board Info at: %08lx\n",
GENERATED_BD_INFO_SIZE, addr_sp);
addr_sp -= GENERATED_GBL_DATA_SIZE;
id = (gd_t *) addr_sp;
debug("Reserving %zu Bytes for Global Data at: %08lx\n",
GENERATED_GBL_DATA_SIZE, addr_sp);
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
#endif
/* leave 3 words for abort-stack */
addr_sp -= 12;
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
debug("New Stack Pointer is: %08lx\n", addr_sp);
/* Ram isn't board specific, so move it to board code ... */
dram_init_banksize();
display_dram_config(); /* and display it */
gd->relocaddr = addr;
gd->start_addr_sp = addr_sp;
gd->reloc_off = addr - _TEXT_BASE;
debug("relocation Offset is: %08lx\n", gd->reloc_off);
memcpy(id, (void *)gd, GENERATED_GBL_DATA_SIZE);
relocate_code(addr_sp, id, addr);
/* NOTREACHED - relocate_code() does not return */
}
/*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
* data can be written, BSS has been cleared, the stack size in not
* that critical any more, etc.
*/
void board_init_r(gd_t *id, ulong dest_addr)
{
bd_t *bd;
ulong malloc_start;
gd = id;
bd = gd->bd;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
monitor_flash_len = (ulong)&_end - (ulong)&_start;
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
serial_initialize();
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
/* The Malloc area is immediately below the monitor copy in DRAM */
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN);
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
gd->bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
gd->bd->bi_flashsize = flash_init();
gd->bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + gd->bd->bi_flashsize;
if (gd->bd->bi_flashsize)
display_flash_config(gd->bd->bi_flashsize);
#endif /* CONFIG_SYS_NO_FLASH */
#if defined(CONFIG_CMD_NAND)
puts("NAND: ");
nand_init(); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_IDE)
puts("IDE: ");
ide_init();
#endif
#ifdef CONFIG_GENERIC_MMC
puts("MMC: ");
mmc_initialize(gd->bd);
#endif
#if defined(CONFIG_SYS_I2C_ADAPTERS)
i2c_reloc_fixup();
#endif
/* initialize environment */
env_relocate();
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
puts("PCI: ");
nds32_pci_init();
#endif
stdio_init(); /* get the devices list going. */
jumptable_init();
#if defined(CONFIG_API)
/* Initialize API */
api_init();
#endif
console_init_r(); /* fully init console as a device */
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
arch_misc_init();
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r();
#endif
#if defined(CONFIG_USE_IRQ)
/* set up exceptions */
interrupt_init();
/* enable exceptions */
enable_interrupts();
#endif
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif
#if defined(CONFIG_CMD_NET)
puts("Net: ");
eth_initialize();
#if defined(CONFIG_RESET_PHY_R)
debug("Reset Ethernet PHY\n");
reset_phy();
#endif
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;)
main_loop();
/* NOTREACHED - no way out of command loop except booting */
}