mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
989ab87e15
The old MMR defines are being scrubbed, so convert the driver to use the new standard helper macros. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
449 lines
11 KiB
C
449 lines
11 KiB
C
/*
|
|
* video.c - run splash screen on lcd
|
|
*
|
|
* Copyright (c) 2007-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <stdarg.h>
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <malloc.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach-common/bits/dma.h>
|
|
#include <spi.h>
|
|
#include <linux/types.h>
|
|
#include <stdio_dev.h>
|
|
|
|
#include <asm/mach-common/bits/ppi.h>
|
|
#include <asm/mach-common/bits/timer.h>
|
|
|
|
#define LCD_X_RES 320 /* Horizontal Resolution */
|
|
#define LCD_Y_RES 240 /* Vertical Resolution */
|
|
#define DMA_BUS_SIZE 16
|
|
|
|
#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 /* lq035q1 */
|
|
|
|
#if !defined(CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI) && \
|
|
!defined(CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI)
|
|
# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
|
|
#endif
|
|
|
|
/* Interface 16/18-bit TFT over an 8-bit wide PPI using a
|
|
* small Programmable Logic Device (CPLD)
|
|
* http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
|
|
*/
|
|
|
|
#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
|
|
#include <asm/bfin_logo_rgb565_230x230.h>
|
|
#define LCD_BPP 16 /* Bit Per Pixel */
|
|
#define CLOCKS_PPIX 2 /* Clocks per pixel */
|
|
#define CPLD_DELAY 3 /* RGB565 pipeline delay */
|
|
#endif
|
|
|
|
#ifdef CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
|
|
#include <asm/bfin_logo_230x230.h>
|
|
#define LCD_BPP 24 /* Bit Per Pixel */
|
|
#define CLOCKS_PPIX 3 /* Clocks per pixel */
|
|
#define CPLD_DELAY 5 /* RGB888 pipeline delay */
|
|
#endif
|
|
|
|
/*
|
|
* HS and VS timing parameters (all in number of PPI clk ticks)
|
|
*/
|
|
|
|
#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */
|
|
#define H_PERIOD (336 * CLOCKS_PPIX) /* HS period */
|
|
#define H_PULSE (2 * CLOCKS_PPIX) /* HS pulse width */
|
|
#define H_START (7 * CLOCKS_PPIX + CPLD_DELAY) /* first valid pixel */
|
|
|
|
#define U_LINE 4 /* Blanking Lines */
|
|
|
|
#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
|
|
#define V_PULSE (2 * CLOCKS_PPIX) /* VS pulse width (1-5 H_PERIODs) */
|
|
#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
|
|
|
|
#define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8))
|
|
|
|
/*
|
|
* LCD Modes
|
|
*/
|
|
#define LQ035_RL (0 << 8) /* Right -> Left Scan */
|
|
#define LQ035_LR (1 << 8) /* Left -> Right Scan */
|
|
#define LQ035_TB (1 << 9) /* Top -> Botton Scan */
|
|
#define LQ035_BT (0 << 9) /* Botton -> Top Scan */
|
|
#define LQ035_BGR (1 << 11) /* Use BGR format */
|
|
#define LQ035_RGB (0 << 11) /* Use RGB format */
|
|
#define LQ035_NORM (1 << 13) /* Reversal */
|
|
#define LQ035_REV (0 << 13) /* Reversal */
|
|
|
|
#define LQ035_INDEX 0x74
|
|
#define LQ035_DATA 0x76
|
|
|
|
#define LQ035_DRIVER_OUTPUT_CTL 0x1
|
|
#define LQ035_SHUT_CTL 0x11
|
|
|
|
#define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV)
|
|
#define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK)
|
|
|
|
#define LQ035_SHUT (1 << 0) /* Shutdown */
|
|
#define LQ035_ON (0 << 0) /* Shutdown */
|
|
|
|
#ifndef CONFIG_LQ035Q1_LCD_MODE
|
|
#define CONFIG_LQ035Q1_LCD_MODE (LQ035_NORM | LQ035_RL | LQ035_TB | LQ035_BGR)
|
|
#endif
|
|
|
|
#else /* t350mcqb */
|
|
#include <asm/bfin_logo_230x230.h>
|
|
|
|
#define LCD_BPP 24 /* Bit Per Pixel */
|
|
#define CLOCKS_PPIX 3 /* Clocks per pixel */
|
|
|
|
/* HS and VS timing parameters (all in number of PPI clk ticks) */
|
|
#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */
|
|
#define H_PERIOD (408 * CLOCKS_PPIX) /* HS period */
|
|
#define H_PULSE 90 /* HS pulse width */
|
|
#define H_START 204 /* first valid pixel */
|
|
|
|
#define U_LINE 1 /* Blanking Lines */
|
|
|
|
#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
|
|
#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
|
|
#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
|
|
|
|
#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
|
|
#endif
|
|
|
|
#define LCD_PIXEL_SIZE (LCD_BPP / 8)
|
|
#define DMA_SIZE16 2
|
|
|
|
#define PPI_TX_MODE 0x2
|
|
#define PPI_XFER_TYPE_11 0xC
|
|
#define PPI_PORT_CFG_01 0x10
|
|
#define PPI_PACK_EN 0x80
|
|
#define PPI_POLS_1 0x8000
|
|
|
|
#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
|
|
static struct spi_slave *slave;
|
|
static int lq035q1_control(unsigned char reg, unsigned short value)
|
|
{
|
|
int ret;
|
|
u8 regs[3] = {LQ035_INDEX, 0, 0};
|
|
u8 data[3] = {LQ035_DATA, 0, 0};
|
|
u8 dummy[3];
|
|
|
|
regs[2] = reg;
|
|
data[1] = value >> 8;
|
|
data[2] = value & 0xFF;
|
|
|
|
if (!slave) {
|
|
/* FIXME: Verify the max SCK rate */
|
|
slave = spi_setup_slave(CONFIG_LQ035Q1_SPI_BUS,
|
|
CONFIG_LQ035Q1_SPI_CS, 20000000,
|
|
SPI_MODE_3);
|
|
if (!slave)
|
|
return -1;
|
|
}
|
|
|
|
if (spi_claim_bus(slave))
|
|
return -1;
|
|
|
|
ret = spi_xfer(slave, 24, regs, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
ret |= spi_xfer(slave, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
|
|
spi_release_bus(slave);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/* enable and disable PPI functions */
|
|
void EnablePPI(void)
|
|
{
|
|
bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
|
|
}
|
|
|
|
void DisablePPI(void)
|
|
{
|
|
bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
|
|
}
|
|
|
|
void Init_Ports(void)
|
|
{
|
|
const unsigned short pins[] = {
|
|
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
|
|
P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_FS2, 0,
|
|
};
|
|
peripheral_request_list(pins, "lcd");
|
|
}
|
|
|
|
void Init_PPI(void)
|
|
{
|
|
|
|
bfin_write_PPI_DELAY(H_START);
|
|
bfin_write_PPI_COUNT(H_ACTPIX - 1);
|
|
bfin_write_PPI_FRAME(V_LINES);
|
|
|
|
/* PPI control, to be replaced with definitions */
|
|
bfin_write_PPI_CONTROL(
|
|
PPI_TX_MODE | /* output mode , PORT_DIR */
|
|
PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
|
|
PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
|
|
PPI_PACK_EN | /* packing enabled PACK_EN */
|
|
PPI_POLS_1 /* faling edge syncs POLS */
|
|
);
|
|
}
|
|
|
|
void Init_DMA(void *dst)
|
|
{
|
|
bfin_write_DMA0_START_ADDR(dst);
|
|
|
|
/* X count */
|
|
bfin_write_DMA0_X_COUNT(H_ACTPIX / 2);
|
|
bfin_write_DMA0_X_MODIFY(DMA_BUS_SIZE / 8);
|
|
|
|
/* Y count */
|
|
bfin_write_DMA0_Y_COUNT(V_LINES);
|
|
bfin_write_DMA0_Y_MODIFY(DMA_BUS_SIZE / 8);
|
|
|
|
/* DMA Config */
|
|
bfin_write_DMA0_CONFIG(
|
|
WDSIZE_16 | /* 16 bit DMA */
|
|
DMA2D | /* 2D DMA */
|
|
FLOW_AUTO /* autobuffer mode */
|
|
);
|
|
}
|
|
|
|
void EnableDMA(void)
|
|
{
|
|
bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() | DMAEN);
|
|
}
|
|
|
|
void DisableDMA(void)
|
|
{
|
|
bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN);
|
|
}
|
|
|
|
/* Init TIMER0 as Frame Sync 1 generator */
|
|
void InitTIMER0(void)
|
|
{
|
|
bfin_write_TIMER_DISABLE(TIMDIS0); /* disable Timer */
|
|
SSYNC();
|
|
bfin_write_TIMER_STATUS(TIMIL0 | TOVF_ERR0 | TRUN0); /* clear status */
|
|
SSYNC();
|
|
|
|
bfin_write_TIMER0_PERIOD(H_PERIOD);
|
|
SSYNC();
|
|
bfin_write_TIMER0_WIDTH(H_PULSE);
|
|
SSYNC();
|
|
|
|
bfin_write_TIMER0_CONFIG(
|
|
PWM_OUT |
|
|
PERIOD_CNT |
|
|
TIN_SEL |
|
|
CLK_SEL |
|
|
EMU_RUN
|
|
);
|
|
SSYNC();
|
|
}
|
|
|
|
void EnableTIMER0(void)
|
|
{
|
|
bfin_write_TIMER_ENABLE(TIMEN0);
|
|
SSYNC();
|
|
}
|
|
|
|
void DisableTIMER0(void)
|
|
{
|
|
bfin_write_TIMER_DISABLE(TIMDIS0);
|
|
SSYNC();
|
|
}
|
|
|
|
|
|
void InitTIMER1(void)
|
|
{
|
|
bfin_write_TIMER_DISABLE(TIMDIS1); /* disable Timer */
|
|
SSYNC();
|
|
bfin_write_TIMER_STATUS(TIMIL1 | TOVF_ERR1 | TRUN1); /* clear status */
|
|
SSYNC();
|
|
|
|
bfin_write_TIMER1_PERIOD(V_PERIOD);
|
|
SSYNC();
|
|
bfin_write_TIMER1_WIDTH(V_PULSE);
|
|
SSYNC();
|
|
|
|
bfin_write_TIMER1_CONFIG(
|
|
PWM_OUT |
|
|
PERIOD_CNT |
|
|
TIN_SEL |
|
|
CLK_SEL |
|
|
EMU_RUN
|
|
);
|
|
SSYNC();
|
|
}
|
|
|
|
void EnableTIMER1(void)
|
|
{
|
|
bfin_write_TIMER_ENABLE(TIMEN1);
|
|
SSYNC();
|
|
}
|
|
|
|
void DisableTIMER1(void)
|
|
{
|
|
bfin_write_TIMER_DISABLE(TIMDIS1);
|
|
SSYNC();
|
|
}
|
|
|
|
void EnableTIMER12(void)
|
|
{
|
|
bfin_write_TIMER_ENABLE(TIMEN1 | TIMEN0);
|
|
SSYNC();
|
|
}
|
|
|
|
int video_init(void *dst)
|
|
{
|
|
|
|
#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
|
|
lq035q1_control(LQ035_SHUT_CTL, LQ035_ON);
|
|
lq035q1_control(LQ035_DRIVER_OUTPUT_CTL, (CONFIG_LQ035Q1_LCD_MODE &
|
|
LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT);
|
|
#endif
|
|
Init_Ports();
|
|
Init_DMA(dst);
|
|
EnableDMA();
|
|
InitTIMER0();
|
|
InitTIMER1();
|
|
Init_PPI();
|
|
EnablePPI();
|
|
|
|
#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
|
|
EnableTIMER12();
|
|
#else
|
|
/* Frame sync 2 (VS) needs to start at least one PPI clk earlier */
|
|
EnableTIMER1();
|
|
/* Add Some Delay ... */
|
|
SSYNC();
|
|
SSYNC();
|
|
SSYNC();
|
|
SSYNC();
|
|
|
|
/* now start frame sync 1 */
|
|
EnableTIMER0();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
|
|
{
|
|
if (dcache_status())
|
|
blackfin_dcache_flush_range(logo->data, logo->data + logo->size);
|
|
|
|
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
|
|
|
|
/* Setup destination start address */
|
|
bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
|
|
+ (y * LCD_X_RES * LCD_PIXEL_SIZE));
|
|
/* Setup destination xcount */
|
|
bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
|
|
/* Setup destination xmodify */
|
|
bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
|
|
|
|
/* Setup destination ycount */
|
|
bfin_write_MDMA_D0_Y_COUNT(logo->height);
|
|
/* Setup destination ymodify */
|
|
bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE + DMA_SIZE16);
|
|
|
|
|
|
/* Setup Source start address */
|
|
bfin_write_MDMA_S0_START_ADDR(logo->data);
|
|
/* Setup Source xcount */
|
|
bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
|
|
/* Setup Source xmodify */
|
|
bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
|
|
|
|
/* Setup Source ycount */
|
|
bfin_write_MDMA_S0_Y_COUNT(logo->height);
|
|
/* Setup Source ymodify */
|
|
bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
|
|
|
|
|
|
/* Enable source DMA */
|
|
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
|
|
SSYNC();
|
|
bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
|
|
|
|
while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN);
|
|
|
|
bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
|
|
bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
|
|
|
|
}
|
|
|
|
void video_stop(void)
|
|
{
|
|
DisablePPI();
|
|
DisableDMA();
|
|
DisableTIMER0();
|
|
DisableTIMER1();
|
|
#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1
|
|
lq035q1_control(LQ035_SHUT_CTL, LQ035_SHUT);
|
|
#endif
|
|
}
|
|
|
|
void video_putc(const char c)
|
|
{
|
|
}
|
|
|
|
void video_puts(const char *s)
|
|
{
|
|
}
|
|
|
|
int drv_video_init(void)
|
|
{
|
|
int error, devices = 1;
|
|
struct stdio_dev videodev;
|
|
|
|
u8 *dst;
|
|
u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
|
|
|
|
dst = malloc(fbmem_size);
|
|
|
|
if (dst == NULL) {
|
|
printf("Failed to alloc FB memory\n");
|
|
return -1;
|
|
}
|
|
|
|
#ifdef EASYLOGO_ENABLE_GZIP
|
|
unsigned char *data = EASYLOGO_DECOMP_BUFFER;
|
|
unsigned long src_len = EASYLOGO_ENABLE_GZIP;
|
|
if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
|
|
puts("Failed to decompress logo\n");
|
|
free(dst);
|
|
return -1;
|
|
}
|
|
bfin_logo.data = data;
|
|
#endif
|
|
|
|
memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0], fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
|
|
|
|
dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
|
|
(LCD_X_RES - bfin_logo.width) / 2,
|
|
(LCD_Y_RES - bfin_logo.height) / 2);
|
|
|
|
video_init(dst); /* Video initialization */
|
|
|
|
memset(&videodev, 0, sizeof(videodev));
|
|
|
|
strcpy(videodev.name, "video");
|
|
videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
|
|
videodev.flags = DEV_FLAGS_SYSTEM; /* No Output */
|
|
videodev.putc = video_putc; /* 'putc' function */
|
|
videodev.puts = video_puts; /* 'puts' function */
|
|
|
|
error = stdio_register(&videodev);
|
|
|
|
return (error == 0) ? devices : error;
|
|
}
|