mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-20 18:23:08 +00:00
7e5f460ec4
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
427 lines
10 KiB
C
427 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Bluewater Systems Snapper 9260/9G20 modules
|
|
*
|
|
* (C) Copyright 2011 Bluewater Systems
|
|
* Author: Andre Renaud <andre@bluewatersys.com>
|
|
* Author: Ryan Mallon <ryan@bluewatersys.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <atmel_lcd.h>
|
|
#include <atmel_lcdc.h>
|
|
#include <atmel_mci.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <init.h>
|
|
#include <lcd.h>
|
|
#include <net.h>
|
|
#ifndef CONFIG_DM_ETH
|
|
#include <netdev.h>
|
|
#endif
|
|
#include <asm/global_data.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/arch/at91sam9g45_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_emac.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/at91_rtc.h>
|
|
#include <asm/arch/at91_sck.h>
|
|
#include <asm/arch/atmel_serial.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <linux/delay.h>
|
|
|
|
#ifdef CONFIG_GURNARD_SPLASH
|
|
#include "splash_logo.h"
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* IO Expander pins */
|
|
#define IO_EXP_ETH_RESET (0 << 1)
|
|
#define IO_EXP_ETH_POWER (1 << 1)
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void gurnard_macb_hw_init(void)
|
|
{
|
|
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_EMAC);
|
|
|
|
/*
|
|
* Enable pull-up on:
|
|
* RXDV (PA12) => MODE0 - PHY also has pull-up
|
|
* ERX0 (PA13) => MODE1 - PHY also has pull-up
|
|
* ERX1 (PA15) => MODE2 - PHY also has pull-up
|
|
*/
|
|
writel(pin_to_mask(AT91_PIN_PA15) |
|
|
pin_to_mask(AT91_PIN_PA12) |
|
|
pin_to_mask(AT91_PIN_PA13),
|
|
&pioa->puer);
|
|
|
|
at91_phy_reset();
|
|
|
|
at91_macb_hw_init();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
static int gurnard_nand_hw_init(void)
|
|
{
|
|
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
|
ulong flags;
|
|
int ret;
|
|
|
|
/* Enable CS3 as NAND/SmartMedia */
|
|
setbits_le32(&matrix->ebicsa, AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
|
|
AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
|
|
&smc->cs[3].setup);
|
|
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
|
|
AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
|
|
&smc->cs[3].pulse);
|
|
writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
|
|
&smc->cs[3].cycle);
|
|
#ifdef CONFIG_SYS_NAND_DBW_16
|
|
flags = AT91_SMC_MODE_DBW_16;
|
|
#else
|
|
flags = AT91_SMC_MODE_DBW_8;
|
|
#endif
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
|
AT91_SMC_MODE_EXNW_DISABLE |
|
|
flags |
|
|
AT91_SMC_MODE_TDF_CYCLE(3),
|
|
&smc->cs[3].mode);
|
|
|
|
ret = gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand_rdy");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
|
|
|
|
/* Enable NandFlash */
|
|
ret = gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand_ce");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GURNARD_SPLASH
|
|
static void lcd_splash(int width, int height)
|
|
{
|
|
u16 colour;
|
|
int x, y;
|
|
u16 *base_addr = (u16 *)gd->video_bottom;
|
|
|
|
memset(base_addr, 0xff, width * height * 2);
|
|
/*
|
|
* Blit the logo to the center of the screen
|
|
*/
|
|
for (y = 0; y < BMP_LOGO_HEIGHT; y++) {
|
|
for (x = 0; x < BMP_LOGO_WIDTH; x++) {
|
|
int posx, posy;
|
|
colour = bmp_logo_palette[bmp_logo_bitmap[
|
|
y * BMP_LOGO_WIDTH + x]];
|
|
posx = x + (width - BMP_LOGO_WIDTH) / 2;
|
|
posy = y;
|
|
base_addr[posy * width + posx] = colour;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_VIDEO
|
|
static void at91sam9g45_lcd_hw_init(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
|
|
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
|
|
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
|
|
at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
|
|
|
|
at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
|
|
at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
|
|
at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
|
|
at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
|
|
at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
|
|
at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
|
|
at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
|
|
at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
|
|
at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
|
|
at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
|
|
at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
|
|
at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
|
|
at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
|
|
at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */
|
|
at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
|
|
at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
|
|
at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
|
|
at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
|
|
at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
|
|
at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
|
|
at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
|
|
at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */
|
|
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
|
|
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_LCDC);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GURNARD_FPGA
|
|
/**
|
|
* Initialise the memory bus settings so that we can talk to the
|
|
* memory mapped FPGA
|
|
*/
|
|
static int fpga_hw_init(void)
|
|
{
|
|
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
|
int i;
|
|
|
|
setbits_le32(&matrix->ebicsa, AT91_MATRIX_EBI_CS1A_SDRAMC);
|
|
|
|
at91_set_a_periph(2, 4, 0); /* EBIA21 */
|
|
at91_set_a_periph(2, 5, 0); /* EBIA22 */
|
|
at91_set_a_periph(2, 6, 0); /* EBIA23 */
|
|
at91_set_a_periph(2, 7, 0); /* EBIA24 */
|
|
at91_set_a_periph(2, 12, 0); /* EBIA25 */
|
|
for (i = 15; i <= 31; i++) /* EBINWAIT & EBID16 - 31 */
|
|
at91_set_a_periph(2, i, 0);
|
|
|
|
/* configure SMC cs0 for FPGA access timing */
|
|
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(2) |
|
|
AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(2),
|
|
&smc->cs[0].setup);
|
|
writel(AT91_SMC_PULSE_NWE(5) | AT91_SMC_PULSE_NCS_WR(4) |
|
|
AT91_SMC_PULSE_NRD(6) | AT91_SMC_PULSE_NCS_RD(4),
|
|
&smc->cs[0].pulse);
|
|
writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6),
|
|
&smc->cs[0].cycle);
|
|
writel(AT91_SMC_MODE_BAT |
|
|
AT91_SMC_MODE_EXNW_DISABLE |
|
|
AT91_SMC_MODE_DBW_32 |
|
|
AT91_SMC_MODE_TDF |
|
|
AT91_SMC_MODE_TDF_CYCLE(2),
|
|
&smc->cs[0].mode);
|
|
|
|
/* Do a write to within EBI_CS1 to enable the SDCK */
|
|
writel(0, ATMEL_BASE_CS1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
|
|
#define USB0_ENABLE_PIN AT91_PIN_PB22
|
|
#define USB1_ENABLE_PIN AT91_PIN_PB23
|
|
|
|
void gurnard_usb_init(void)
|
|
{
|
|
at91_set_gpio_output(USB0_ENABLE_PIN, 1);
|
|
at91_set_gpio_value(USB0_ENABLE_PIN, 0);
|
|
at91_set_gpio_output(USB1_ENABLE_PIN, 1);
|
|
at91_set_gpio_value(USB1_ENABLE_PIN, 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
int cpu_mmc_init(struct bd_info *bis)
|
|
{
|
|
return atmel_mci_init((void *)ATMEL_BASE_MCI0);
|
|
}
|
|
#endif
|
|
|
|
static void gurnard_enable_console(int enable)
|
|
{
|
|
at91_set_gpio_output(AT91_PIN_PB14, 1);
|
|
at91_set_gpio_value(AT91_PIN_PB14, enable ? 0 : 1);
|
|
}
|
|
|
|
void at91sam9g45_slowclock_init(void)
|
|
{
|
|
/*
|
|
* On AT91SAM9G45 revC CPUs, the slow clock can be based on an
|
|
* internal impreciseRC oscillator or an external 32kHz oscillator.
|
|
* Switch to the latter.
|
|
*/
|
|
unsigned i, tmp;
|
|
ulong *reg = (ulong *)ATMEL_BASE_SCKCR;
|
|
|
|
tmp = readl(reg);
|
|
if ((tmp & AT91SAM9G45_SCKCR_OSCSEL) == AT91SAM9G45_SCKCR_OSCSEL_RC) {
|
|
timer_init();
|
|
tmp |= AT91SAM9G45_SCKCR_OSC32EN;
|
|
writel(tmp, reg);
|
|
for (i = 0; i < 1200; i++)
|
|
udelay(1000);
|
|
tmp |= AT91SAM9G45_SCKCR_OSCSEL_32;
|
|
writel(tmp, reg);
|
|
udelay(200);
|
|
tmp &= ~AT91SAM9G45_SCKCR_RCEN;
|
|
writel(tmp, reg);
|
|
}
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
at91_seriald_hw_init();
|
|
gurnard_enable_console(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
const char *rev_str;
|
|
#ifdef CONFIG_CMD_NAND
|
|
int ret;
|
|
#endif
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_PIOA);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOB);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOC);
|
|
at91_periph_clk_enable(ATMEL_ID_PIODE);
|
|
|
|
at91sam9g45_slowclock_init();
|
|
|
|
/*
|
|
* Clear the RTC IDR to disable all IRQs. Avoid issues when Linux
|
|
* boots with spurious IRQs.
|
|
*/
|
|
writel(0xffffffff, AT91_RTC_IDR);
|
|
|
|
/* Make sure that the reset signal is attached properly */
|
|
setbits_le32(AT91_ASM_RSTC_MR, AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN);
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_SNAPPER_9260;
|
|
|
|
/* Address of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
ret = gurnard_nand_hw_init();
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
at91_spi0_hw_init(1 << 4);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
gurnard_macb_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_GURNARD_FPGA
|
|
fpga_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
gurnard_usb_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
at91_set_A_periph(AT91_PIN_PA12, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA8, 1);
|
|
at91_set_gpio_value(AT91_PIN_PA8, 0);
|
|
at91_mci_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_VIDEO
|
|
at91sam9g45_lcd_hw_init();
|
|
at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
|
|
|
|
/* Select the second timing index for board rev 2 */
|
|
rev_str = env_get("board_rev");
|
|
if (rev_str && !strncmp(rev_str, "2", 1)) {
|
|
struct udevice *dev;
|
|
|
|
uclass_find_first_device(UCLASS_VIDEO, &dev);
|
|
if (dev) {
|
|
struct atmel_lcd_plat *plat = dev_get_plat(dev);
|
|
|
|
plat->timing_index = 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u_int8_t env_enetaddr[8];
|
|
char *env_str;
|
|
char *end;
|
|
int i;
|
|
|
|
/*
|
|
* Set MAC address so we do not need to init Ethernet before Linux
|
|
* boot
|
|
*/
|
|
env_str = env_get("ethaddr");
|
|
if (env_str) {
|
|
struct at91_emac *emac = (struct at91_emac *)ATMEL_BASE_EMAC;
|
|
/* Parse MAC address */
|
|
for (i = 0; i < 6; i++) {
|
|
env_enetaddr[i] = env_str ?
|
|
hextoul(env_str, &end) : 0;
|
|
if (env_str)
|
|
env_str = (*end) ? end+1 : end;
|
|
}
|
|
|
|
/* Set hardware address */
|
|
writel(env_enetaddr[0] | env_enetaddr[1] << 8 |
|
|
env_enetaddr[2] << 16 | env_enetaddr[3] << 24,
|
|
&emac->sa2l);
|
|
writel((env_enetaddr[4] | env_enetaddr[5] << 8), &emac->sa2h);
|
|
|
|
printf("MAC: %s\n", env_get("ethaddr"));
|
|
} else {
|
|
/* Not set in environment */
|
|
printf("MAC: not set\n");
|
|
}
|
|
#ifdef CONFIG_GURNARD_SPLASH
|
|
lcd_splash(480, 272);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
int board_eth_init(struct bd_info *bis)
|
|
{
|
|
return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0);
|
|
}
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
void reset_phy(void)
|
|
{
|
|
}
|
|
|
|
static struct atmel_serial_plat at91sam9260_serial_plat = {
|
|
.base_addr = ATMEL_BASE_DBGU,
|
|
};
|
|
|
|
U_BOOT_DRVINFO(at91sam9260_serial) = {
|
|
.name = "serial_atmel",
|
|
.plat = &at91sam9260_serial_plat,
|
|
};
|