mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
b8790ebeec
The DT spec demands a unit-address of a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Fix all occurences in the FIT image example files where this was not observed, to not give bad examples to the reader. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
96 lines
2 KiB
Text
96 lines
2 KiB
Text
/dts-v1/;
|
|
|
|
/*
|
|
* (Bogus) example FIT image description file demonstrating the usage
|
|
* of multiple images loaded by the SPL.
|
|
* Several binaries will be loaded at their respective load addresses.
|
|
*
|
|
* For booting U-Boot, "firmware" is searched first. If not found, "loadables"
|
|
* is used to identify images to be loaded into memory. If falcon boot is
|
|
* enabled, "kernel" is searched first. If not found, it falls back to the
|
|
* same flow as booting U-Boot. Changing image type will result skipping
|
|
* specific image.
|
|
*
|
|
* Finally the one image specifying an entry point will be entered by the SPL.
|
|
*/
|
|
|
|
/ {
|
|
description = "multiple firmware blobs and U-Boot, loaded by SPL";
|
|
#address-cells = <0x1>;
|
|
|
|
images {
|
|
|
|
uboot {
|
|
description = "U-Boot (64-bit)";
|
|
type = "standalone";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x4a000000>;
|
|
};
|
|
|
|
atf {
|
|
description = "ARM Trusted Firmware";
|
|
type = "firmware";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x18000>;
|
|
entry = <0x18000>;
|
|
};
|
|
|
|
mgmt-firmware {
|
|
description = "arisc management processor firmware";
|
|
type = "firmware";
|
|
arch = "or1k";
|
|
compression = "none";
|
|
load = <0x40000>;
|
|
};
|
|
|
|
fdt-1 {
|
|
description = "Pine64+ DT";
|
|
type = "flat_dt";
|
|
compression = "none";
|
|
load = <0x4fa00000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
fdt-2 {
|
|
description = "Pine64 DT";
|
|
type = "flat_dt";
|
|
compression = "none";
|
|
load = <0x4fa00000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
kernel {
|
|
description = "4.7-rc5 kernel";
|
|
type = "kernel";
|
|
compression = "none";
|
|
load = <0x40080000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
initrd {
|
|
description = "Debian installer initrd";
|
|
type = "ramdisk";
|
|
compression = "none";
|
|
load = <0x4fe00000>;
|
|
arch = "arm64";
|
|
};
|
|
};
|
|
|
|
configurations {
|
|
default = "config-1";
|
|
|
|
config-1 {
|
|
description = "sun50i-a64-pine64-plus";
|
|
loadables = "uboot", "atf", "kernel", "initrd";
|
|
fdt = "fdt-1";
|
|
};
|
|
|
|
config-2 {
|
|
description = "sun50i-a64-pine64";
|
|
loadables = "uboot", "atf", "mgmt-firmware";
|
|
fdt = "fdt-2";
|
|
};
|
|
};
|
|
};
|