u-boot/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
Adam Ford 5054560e0c imx: imx8mm-beacon: Enable FlexSPI in U-Boot
In order to use the FlexSPI interface in U-Boot, configure
the alias to make spi0 point to flexspi.

With that enabled, sf probe detects the QSPI part as:
SF: Detected n25q256ax1 with page size 256 Bytes, erase size 4 KiB, total 32 MiB

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-11 14:40:02 +02:00

130 lines
1.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2020 Compass Electronics Group, LLC
*/
#include "imx8mm-u-boot.dtsi"
/ {
aliases {
spi0 = &flexspi;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
bootph-pre-ram;
};
};
&aips4 {
bootph-pre-ram;
};
&reg_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
};
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
&gpio1 {
bootph-pre-ram;
};
&gpio2 {
bootph-pre-ram;
};
&gpio3 {
bootph-pre-ram;
};
&gpio4 {
bootph-pre-ram;
};
&gpio5 {
bootph-pre-ram;
};
&pca6416_0 {
compatible = "ti,tca6416";
};
&pca6416_1 {
compatible = "ti,tca6416";
};
&pinctrl_i2c1 {
bootph-pre-ram;
};
&pinctrl_pmic {
bootph-pre-ram;
};
&pinctrl_uart2 {
bootph-pre-ram;
};
&pinctrl_usdhc2_gpio {
bootph-pre-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
};
&pinctrl_usdhc3 {
bootph-pre-ram;
};
&pinctrl_wdog {
bootph-pre-ram;
};
&reg_usbotg1 {
};
&uart2 {
bootph-pre-ram;
};
&usbmisc1 {
bootph-pre-ram;
};
&usbotg1 {
bootph-pre-ram;
};
&usbphynop1 {
bootph-pre-ram;
};
&usdhc2 {
bootph-pre-ram;
};
&usdhc3 {
bootph-pre-ram;
};
&i2c1 {
bootph-pre-ram;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
bootph-pre-ram;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
bootph-pre-ram;
};
&wdog1 {
bootph-pre-ram;
};