u-boot/drivers/i2c/mxc_i2c.c
Stefano Babic 8627111543 IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
As exception among the i.MX processors, the i.MX31 has headers
without general names (mx31-regs.h, mx31.h instead of imx-regs.h and
clock.h). This requires several nasty #ifdef in the drivers to
include the correct header. The patch cleans up the driver and
renames the header files as for the other i.MX processors.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27 19:38:05 +02:00

285 lines
6.3 KiB
C

/*
* i2c driver for Freescale mx31
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#if defined(CONFIG_HARD_I2C)
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#define IADR 0x00
#define IFDR 0x04
#define I2CR 0x08
#define I2SR 0x0c
#define I2DR 0x10
#define I2CR_IEN (1 << 7)
#define I2CR_IIEN (1 << 6)
#define I2CR_MSTA (1 << 5)
#define I2CR_MTX (1 << 4)
#define I2CR_TX_NO_AK (1 << 3)
#define I2CR_RSTA (1 << 2)
#define I2SR_ICF (1 << 7)
#define I2SR_IBB (1 << 5)
#define I2SR_IIF (1 << 1)
#define I2SR_RX_NO_AK (1 << 0)
#if defined(CONFIG_SYS_I2C_MX31_PORT1)
#define I2C_BASE 0x43f80000
#define I2C_CLK_OFFSET 26
#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
#define I2C_BASE 0x43f98000
#define I2C_CLK_OFFSET 28
#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
#define I2C_BASE 0x43f84000
#define I2C_CLK_OFFSET 30
#elif defined(CONFIG_SYS_I2C_MX53_PORT1)
#define I2C_BASE I2C1_BASE_ADDR
#elif defined(CONFIG_SYS_I2C_MX53_PORT2)
#define I2C_BASE I2C2_BASE_ADDR
#elif defined(CONFIG_SYS_I2C_MX35_PORT1)
#define I2C_BASE I2C_BASE_ADDR
#else
#error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver"
#endif
#define I2C_MAX_TIMEOUT 10000
#define I2C_MAX_RETRIES 3
static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
static inline void i2c_reset(void)
{
writew(0, I2C_BASE + I2CR); /* Reset module */
writew(0, I2C_BASE + I2SR);
writew(I2CR_IEN, I2C_BASE + I2CR);
}
void i2c_init(int speed, int unused)
{
int freq;
int i;
#if defined(CONFIG_MX31)
struct clock_control_regs *sc_regs =
(struct clock_control_regs *)CCM_BASE;
freq = mx31_get_ipg_clk();
/* start the required I2C clock */
writel(readl(&sc_regs->cgr0) | (3 << I2C_CLK_OFFSET),
&sc_regs->cgr0);
#else
freq = mxc_get_clock(MXC_IPG_PERCLK);
#endif
for (i = 0; i < 0x1f; i++)
if (freq / div[i] <= speed)
break;
debug("%s: speed: %d\n", __func__, speed);
writew(i, I2C_BASE + IFDR);
i2c_reset();
}
static int wait_idle(void)
{
int timeout = I2C_MAX_TIMEOUT;
while ((readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout) {
writew(0, I2C_BASE + I2SR);
udelay(1);
}
return timeout ? timeout : (!(readw(I2C_BASE + I2SR) & I2SR_IBB));
}
static int wait_busy(void)
{
int timeout = I2C_MAX_TIMEOUT;
while (!(readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout)
udelay(1);
writew(0, I2C_BASE + I2SR); /* clear interrupt */
return timeout;
}
static int wait_complete(void)
{
int timeout = I2C_MAX_TIMEOUT;
while ((!(readw(I2C_BASE + I2SR) & I2SR_ICF)) && (--timeout)) {
writew(0, I2C_BASE + I2SR);
udelay(1);
}
udelay(200);
writew(0, I2C_BASE + I2SR); /* clear interrupt */
return timeout;
}
static int tx_byte(u8 byte)
{
writew(byte, I2C_BASE + I2DR);
if (!wait_complete() || readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
return -1;
return 0;
}
static int rx_byte(int last)
{
if (!wait_complete())
return -1;
if (last)
writew(I2CR_IEN, I2C_BASE + I2CR);
return readw(I2C_BASE + I2DR);
}
int i2c_probe(uchar chip)
{
int ret;
writew(0, I2C_BASE + I2CR); /* Reset module */
writew(I2CR_IEN, I2C_BASE + I2CR);
writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
ret = tx_byte(chip << 1);
writew(I2CR_IEN | I2CR_MTX, I2C_BASE + I2CR);
return ret;
}
static int i2c_addr(uchar chip, uint addr, int alen)
{
int i, retry = 0;
for (retry = 0; retry < 3; retry++) {
if (wait_idle())
break;
i2c_reset();
for (i = 0; i < I2C_MAX_TIMEOUT; i++)
udelay(1);
}
if (retry >= I2C_MAX_RETRIES) {
debug("%s:bus is busy(%x)\n",
__func__, readw(I2C_BASE + I2SR));
return -1;
}
writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
if (!wait_busy()) {
debug("%s:trigger start fail(%x)\n",
__func__, readw(I2C_BASE + I2SR));
return -1;
}
if (tx_byte(chip << 1) || (readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) {
debug("%s:chip address cycle fail(%x)\n",
__func__, readw(I2C_BASE + I2SR));
return -1;
}
while (alen--)
if (tx_byte((addr >> (alen * 8)) & 0xff) ||
(readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) {
debug("%s:device address cycle fail(%x)\n",
__func__, readw(I2C_BASE + I2SR));
return -1;
}
return 0;
}
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int timeout = I2C_MAX_TIMEOUT;
int ret;
debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
__func__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen)) {
printf("i2c_addr failed\n");
return -1;
}
writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA, I2C_BASE + I2CR);
if (tx_byte(chip << 1 | 1))
return -1;
writew(I2CR_IEN | I2CR_MSTA |
((len == 1) ? I2CR_TX_NO_AK : 0),
I2C_BASE + I2CR);
ret = readw(I2C_BASE + I2DR);
while (len--) {
ret = rx_byte(len == 0);
if (ret < 0)
return -1;
*buf++ = ret;
if (len <= 1)
writew(I2CR_IEN | I2CR_MSTA |
I2CR_TX_NO_AK,
I2C_BASE + I2CR);
}
writew(I2CR_IEN, I2C_BASE + I2CR);
while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
}
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int timeout = I2C_MAX_TIMEOUT;
debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
__func__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen))
return -1;
while (len--)
if (tx_byte(*buf++))
return -1;
writew(I2CR_IEN, I2C_BASE + I2CR);
while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
}
#endif /* CONFIG_HARD_I2C */