u-boot/arch/powerpc/cpu/mpc8xx/Kconfig
Christophe Leroy 53193a4f07 powerpc, 8xx: Add support for MCR3000 board from CSSI
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000
and CMPC885 which are respectively based on MPC866 and MPC885 processors.

This patch adds support for the first board.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08 15:56:06 -04:00

175 lines
3.1 KiB
Text

menu "mpc8xx CPU"
depends on 8xx
config SYS_CPU
default "mpc8xx"
choice
prompt "Target select"
optional
config TARGET_MCR3000
bool "Support MCR3000 board from CSSI"
endchoice
choice
prompt "CPU select"
default MPC866
config MPC866
bool "MPC866"
config MPC885
bool "MPC885"
endchoice
config 8xx_GCLK_FREQ
int "CPU GCLK Frequency"
comment "Specific commands"
config CMD_IMMAP
bool "Enable various commands to dump IMMR information"
help
This enables various commands such as:
siuinfo - print System Interface Unit (SIU) registers
memcinfo - print Memory Controller registers
comment "Configuration Registers"
config SYS_SIUMCR
hex "SIUMCR register"
help
SIU Module Configuration (11-6)
config SYS_SYPCR
hex "SYPCR register"
help
System Protection Control (11-9)
config SYS_TBSCR
hex "TBSCR register"
help
Time Base Status and Control (11-26)
config SYS_PISCR
hex "PISCR register"
help
Periodic Interrupt Status and Control (11-31)
config SYS_PLPRCR_BOOL
bool "Customise PLPRCR"
config SYS_PLPRCR
hex "PLPRCR register"
depends on SYS_PLPRCR_BOOL
help
PLL, Low-Power, and Reset Control Register (15-30)
config SYS_SCCR
hex "SCCR register"
help
System Clock and reset Control Register (15-27)
config SYS_SCCR_MASK
hex "MASK for setting SCCR register"
config SYS_DER
hex "DER register"
help
Debug Event Register (37-47)
comment "Memory mapping"
config SYS_BR0_PRELIM
hex "Preliminary value for BR0"
config SYS_OR0_PRELIM
hex "Preliminary value for OR0"
config SYS_BR1_PRELIM_BOOL
bool "Define Bank 1"
config SYS_BR1_PRELIM
hex "Preliminary value for BR1"
depends on SYS_BR1_PRELIM_BOOL
config SYS_OR1_PRELIM
hex "Preliminary value for OR1"
depends on SYS_BR1_PRELIM_BOOL
config SYS_BR2_PRELIM_BOOL
bool "Define Bank 2"
config SYS_BR2_PRELIM
hex "Preliminary value for BR2"
depends on SYS_BR2_PRELIM_BOOL
config SYS_OR2_PRELIM
hex "Preliminary value for OR2"
depends on SYS_BR2_PRELIM_BOOL
config SYS_BR3_PRELIM_BOOL
bool "Define Bank 3"
config SYS_BR3_PRELIM
hex "Preliminary value for BR3"
depends on SYS_BR3_PRELIM_BOOL
config SYS_OR3_PRELIM
hex "Preliminary value for OR3"
depends on SYS_BR3_PRELIM_BOOL
config SYS_BR4_PRELIM_BOOL
bool "Define Bank 4"
config SYS_BR4_PRELIM
hex "Preliminary value for BR4"
depends on SYS_BR4_PRELIM_BOOL
config SYS_OR4_PRELIM
hex "Preliminary value for OR4"
depends on SYS_BR4_PRELIM_BOOL
config SYS_BR5_PRELIM_BOOL
bool "Define Bank 5"
config SYS_BR5_PRELIM
hex "Preliminary value for BR5"
depends on SYS_BR5_PRELIM_BOOL
config SYS_OR5_PRELIM
hex "Preliminary value for OR5"
depends on SYS_BR5_PRELIM_BOOL
config SYS_BR6_PRELIM_BOOL
bool "Define Bank 6"
config SYS_BR6_PRELIM
hex "Preliminary value for BR6"
depends on SYS_BR6_PRELIM_BOOL
config SYS_OR6_PRELIM
hex "Preliminary value for OR6"
depends on SYS_BR6_PRELIM_BOOL
config SYS_BR7_PRELIM_BOOL
bool "Define Bank 7"
config SYS_BR7_PRELIM
hex "Preliminary value for BR7"
depends on SYS_BR7_PRELIM_BOOL
config SYS_OR7_PRELIM
hex "Preliminary value for OR7"
depends on SYS_BR7_PRELIM_BOOL
config SYS_IMMR
hex "Value for IMMR"
source "board/cssi/MCR3000/Kconfig"
endmenu