u-boot/board/sbc8548/sbc8548.c
Paul Gortmaker e2b363ff53 sbc8548: Fix up local bus init to be frequency aware
The code here was copied from the mpc8548cds support, and it
wasn't using the CONFIG_SYS_LBC_LCRR define, and was just
unconditionally setting the LCRR_EADC bit.  Snooping with a
hardware debugger also showed we had LCRR_DBYP set, since we were
setting it based on a read of an uninitialized lcrr read via
clkdiv.  Borrow from the code in the tqm85xx.c support to add
LBC frequency aware masking of these bits.

This change will correct reliability issues associated with trying
to use the 128MB of LBC 100MHz SDRAM on this board.  Thanks to
Keith Savage for assistance in diagnosing the root cause of this.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-11 13:59:17 -06:00

328 lines
7.6 KiB
C

/*
* Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
*
* Copyright 2007 Embedded Specialties, Inc.
*
* Copyright 2004, 2007 Freescale Semiconductor.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <spd_sdram.h>
#include <netdev.h>
#include <tsec.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
void local_bus_init(void);
int board_early_init_f (void)
{
return 0;
}
int checkboard (void)
{
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;
printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
in_8(rev) >> 4);
/*
* Initialize local bus.
*/
local_bus_init ();
out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */
out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */
return 0;
}
/*
* Initialize Local Bus
*/
void
local_bus_init(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
lbc_mhz = sysinfo.freqLocalBus / 1000000;
clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
out_be32(&gur->lbiuiplldcr1, 0x00078080);
if (clkdiv == 16) {
out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
} else if (clkdiv == 8) {
out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
} else if (clkdiv == 4) {
out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
}
/*
* Local Bus Clock > 83.3 MHz. According to timing
* specifications set LCRR[EADC] to 2 delay cycles.
*/
if (lbc_mhz > 83) {
lcrr &= ~LCRR_EADC;
lcrr |= LCRR_EADC_2;
}
/*
* According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
* disable PLL bypass for Local Bus Clock > 83 MHz.
*/
if (lbc_mhz >= 66)
lcrr &= (~LCRR_DBYP); /* DLL Enabled */
else
lcrr |= LCRR_DBYP; /* DLL Bypass */
out_be32(&lbc->lcrr, lcrr);
asm("sync;isync;msync");
/*
* According to MPC8548ERMAD Rev.1.3 read back LCRR
* and terminate with isync
*/
lcrr = in_be32(&lbc->lcrr);
asm ("isync;");
/* let DLL stabilize */
udelay(500);
out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
}
/*
* Initialize SDRAM memory on the Local Bus.
*/
void lbc_sdram_init(void)
{
#if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
uint idx;
const unsigned long size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint *sdram_addr2 = (uint *)(CONFIG_SYS_LBC_SDRAM_BASE + size/2);
puts(" SDRAM: ");
print_size(size, "\n");
/*
* Setup SDRAM Base and Option Registers
*/
set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
asm("msync");
out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT);
out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
asm("msync");
/*
* Issue PRECHARGE ALL command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_PCHALL);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
/*
* Issue 8 AUTO REFRESH commands.
*/
for (idx = 0; idx < 8; idx++) {
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_ARFRSH);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
}
/*
* Issue 8 MODE-set command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_MRW);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(100);
/*
* Issue RFEN command.
*/
out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_RFEN);
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
*sdram_addr2 = 0xff;
ppcDcbf((unsigned long) sdram_addr2);
udelay(200); /* Overkill. Must wait > 200 bus cycles */
#endif /* enable SDRAM init */
}
#if defined(CONFIG_SYS_DRAM_TEST)
int
testdram(void)
{
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing DRAM from 0x%08x to 0x%08x\n",
CONFIG_SYS_MEMTEST_START,
CONFIG_SYS_MEMTEST_END);
printf("DRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test passed.\n");
return 0;
}
#endif
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI1 */
#ifdef CONFIG_PCI
void
pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int first_free_busno = 0;
#ifdef CONFIG_PCI1
struct fsl_pci_info pci_info;
u32 devdisr = in_be32(&gur->devdisr);
u32 pordevsr = in_be32(&gur->pordevsr);
u32 porpllsr = in_be32(&gur->porpllsr);
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33000000) ? "33" :
(pci_speed == 66000000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_arb ? "arbiter" : "external-arbiter");
SET_STD_PCI_INFO(pci_info, 1);
set_next_law(pci_info.mem_phys,
law_size_bits(pci_info.mem_size), pci_info.law);
set_next_law(pci_info.io_phys,
law_size_bits(pci_info.io_size), pci_info.law);
first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
printf("PCI: disabled\n");
}
puts("\n");
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */
fsl_pcie_init_board(first_free_busno);
}
#endif
int board_eth_init(bd_t *bis)
{
tsec_standard_init(bis);
pci_eth_init(bis);
return 0; /* otherwise cpu_eth_init gets run */
}
int last_stage_init(void)
{
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FSL_PCI_INIT
FT_FSL_PCI_SETUP;
#endif
}
#endif