mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
a760b02031
This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
364 lines
8.7 KiB
C
364 lines
8.7 KiB
C
/*
|
|
* Copyright (C) 2005 Sandburst Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include "ppc440gx_i2c.h"
|
|
#include "sb_common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
long int fixed_sdram (void);
|
|
|
|
/*************************************************************************
|
|
* metrobox_get_master
|
|
*
|
|
* PRI_N - active low signal. If the GPIO pin is low we are the master
|
|
*
|
|
************************************************************************/
|
|
int sbcommon_get_master(void)
|
|
{
|
|
ppc440_gpio_regs_t *gpio_regs;
|
|
|
|
gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
|
|
|
|
if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
|
|
return 0;
|
|
}
|
|
else {
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/*************************************************************************
|
|
* metrobox_secondary_present
|
|
*
|
|
* Figure out if secondary/slave board is present
|
|
*
|
|
************************************************************************/
|
|
int sbcommon_secondary_present(void)
|
|
{
|
|
ppc440_gpio_regs_t *gpio_regs;
|
|
|
|
gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
|
|
|
|
if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
/*************************************************************************
|
|
* sbcommon_get_serial_number
|
|
*
|
|
* Retrieve the board serial number via the mac address in eeprom
|
|
*
|
|
************************************************************************/
|
|
unsigned short sbcommon_get_serial_number(void)
|
|
{
|
|
unsigned char buff[0x100];
|
|
unsigned short sernum;
|
|
|
|
/* Get the board serial number from eeprom */
|
|
/* Initialize I2C */
|
|
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
/* Read 256 bytes in EEPROM */
|
|
i2c_read (0x50, 0, 1, buff, 0x100);
|
|
|
|
memcpy(&sernum, &buff[0xF4], 2);
|
|
sernum /= 32;
|
|
|
|
return (sernum);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* sbcommon_fans
|
|
*
|
|
* Spin up fans 2 & 3 to get some air moving. OS will take care
|
|
* of the rest. This is mostly a precaution...
|
|
*
|
|
* Assumes i2c bus 1 is ready.
|
|
*
|
|
************************************************************************/
|
|
void sbcommon_fans(void)
|
|
{
|
|
/*
|
|
* Attempt to turn on 2 of the fans...
|
|
* Need to go through the bridge
|
|
*/
|
|
puts ("FANS: ");
|
|
|
|
/* select fan4 through the bridge */
|
|
i2c_reg_write1(0x73, /* addr */
|
|
0x00, /* reg */
|
|
0x08); /* val = bus 4 */
|
|
|
|
/* Turn on FAN 4 */
|
|
i2c_reg_write1(0x2e,
|
|
1,
|
|
0x80);
|
|
|
|
i2c_reg_write1(0x2e,
|
|
0,
|
|
0x19);
|
|
|
|
/* Deselect bus 4 on the bridge */
|
|
i2c_reg_write1(0x73,
|
|
0x00,
|
|
0x00);
|
|
|
|
/* select fan3 through the bridge */
|
|
i2c_reg_write1(0x73, /* addr */
|
|
0x00, /* reg */
|
|
0x04); /* val = bus 3 */
|
|
|
|
/* Turn on FAN 3 */
|
|
i2c_reg_write1(0x2e,
|
|
1,
|
|
0x80);
|
|
|
|
i2c_reg_write1(0x2e,
|
|
0,
|
|
0x19);
|
|
|
|
/* Deselect bus 3 on the bridge */
|
|
i2c_reg_write1(0x73,
|
|
0x00,
|
|
0x00);
|
|
|
|
/* select fan2 through the bridge */
|
|
i2c_reg_write1(0x73, /* addr */
|
|
0x00, /* reg */
|
|
0x02); /* val = bus 4 */
|
|
|
|
/* Turn on FAN 2 */
|
|
i2c_reg_write1(0x2e,
|
|
1,
|
|
0x80);
|
|
|
|
i2c_reg_write1(0x2e,
|
|
0,
|
|
0x19);
|
|
|
|
/* Deselect bus 2 on the bridge */
|
|
i2c_reg_write1(0x73,
|
|
0x00,
|
|
0x00);
|
|
|
|
/* select fan1 through the bridge */
|
|
i2c_reg_write1(0x73, /* addr */
|
|
0x00, /* reg */
|
|
0x01); /* val = bus 0 */
|
|
|
|
/* Turn on FAN 1 */
|
|
i2c_reg_write1(0x2e,
|
|
1,
|
|
0x80);
|
|
|
|
i2c_reg_write1(0x2e,
|
|
0,
|
|
0x19);
|
|
|
|
/* Deselect bus 1 on the bridge */
|
|
i2c_reg_write1(0x73,
|
|
0x00,
|
|
0x00);
|
|
|
|
puts ("on\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*************************************************************************
|
|
* initdram
|
|
*
|
|
* Initialize sdram
|
|
*
|
|
************************************************************************/
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = spd_sdram ();
|
|
#else
|
|
dram_size = fixed_sdram ();
|
|
#endif
|
|
return dram_size;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* testdram
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
|
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
|
uint *p;
|
|
|
|
printf("Testing SDRAM: ");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf("OK\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
*
|
|
* Assumes: 128 MB, non-ECC, non-registered
|
|
* PLB @ 133 MHz
|
|
*
|
|
************************************************************************/
|
|
long int fixed_sdram (void)
|
|
{
|
|
uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup some default
|
|
*------------------------------------------------------------------*/
|
|
mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
|
|
mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
|
|
mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
|
|
mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup for board-specific specific mem
|
|
*------------------------------------------------------------------*/
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
|
mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
|
/* RA=10 RD=3 */
|
|
mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
|
|
mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
|
|
mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
|
|
udelay (400); /* Delay 200 usecs (min) */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*------------------------------------------------------------------*/
|
|
mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
|
|
for (;;) {
|
|
mfsdram (SDRAM0_MCSTS, reg);
|
|
if (reg & 0x80000000)
|
|
break;
|
|
}
|
|
|
|
return (128 * 1024 * 1024); /* 128 MB */
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
/*************************************************************************
|
|
* board_get_enetaddr
|
|
*
|
|
* Get the ethernet MAC address for the management ethernet from the
|
|
* strap EEPROM. Note that is the BASE address for the range of
|
|
* external ethernet MACs on the board. The base + 31 is the actual
|
|
* mgmt mac address.
|
|
*
|
|
************************************************************************/
|
|
|
|
void board_get_enetaddr(int macaddr_idx, uchar *enet)
|
|
{
|
|
int i;
|
|
unsigned short tmp;
|
|
unsigned char buff[0x100], *cp;
|
|
|
|
if (0 == macaddr_idx) {
|
|
|
|
/* Initialize I2C */
|
|
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
|
|
/* Read 256 bytes in EEPROM */
|
|
i2c_read (0x50, 0, 1, buff, 0x100);
|
|
|
|
cp = &buff[0xF0];
|
|
|
|
for (i = 0; i < 6; i++,cp++)
|
|
enet[i] = *cp;
|
|
|
|
memcpy(&tmp, &enet[4], 2);
|
|
tmp += 31;
|
|
memcpy(&enet[4], &tmp, 2);
|
|
|
|
} else {
|
|
enet[0] = 0x02;
|
|
enet[1] = 0x00;
|
|
enet[2] = 0x00;
|
|
enet[3] = 0x00;
|
|
enet[4] = 0x00;
|
|
if (1 == sbcommon_get_master() ) {
|
|
/* Master/Primary card */
|
|
enet[5] = 0x01;
|
|
} else {
|
|
/* Slave/Secondary card */
|
|
enet [5] = 0x02;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_POST
|
|
/*
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
* Called from board_init_f().
|
|
*/
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
|
|
return (ctrlc());
|
|
}
|
|
#endif
|