mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
dcac25a05e
There is no need to use set_timer(). Replace with appropriate use of get_timer() Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de>
415 lines
8.5 KiB
C
415 lines
8.5 KiB
C
/*
|
|
* (C) Copyright 2005
|
|
* BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
|
|
*
|
|
* Based On
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include "cfm_flash.h"
|
|
|
|
#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
|
|
#define FLASH_BANK_SIZE 0x200000
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
printf ("AMD: ");
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case (AMD_ID_LV160B & FLASH_TYPEMASK):
|
|
printf ("AM29LV160B (16Bit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
break;
|
|
case FREESCALE_MANUFACT & FLASH_VENDMASK:
|
|
cfm_flash_print_info (info);
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
puts (" Size: ");
|
|
if ((info->size >> 20) > 0)
|
|
{
|
|
printf ("%ld MiB",info->size >> 20);
|
|
}
|
|
else
|
|
{
|
|
printf ("%ld KiB",info->size >> 10);
|
|
}
|
|
printf (" in %d Sectors\n", info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if ((i % 4) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf ("%02d: %08lX%s ", i,info->start[i],
|
|
info->protect[i] ? " P" : " ");
|
|
}
|
|
printf ("\n\n");
|
|
}
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
|
|
switch (i)
|
|
{
|
|
case 1:
|
|
flash_info[i].flash_id =
|
|
(AMD_MANUFACT & FLASH_VENDMASK) |
|
|
(AMD_ID_LV160B & FLASH_TYPEMASK);
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
|
|
flashbase = PHYS_FLASH_1;
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
if (j == 0) {
|
|
/* 1st is 16 KiB */
|
|
flash_info[i].start[j] = flashbase;
|
|
}
|
|
if ((j >= 1) && (j <= 2)) {
|
|
/* 2nd and 3rd are 8 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x4000 + 0x2000 * (j - 1);
|
|
}
|
|
if (j == 3) {
|
|
/* 4th is 32 KiB */
|
|
flash_info[i].start[j] = flashbase + 0x8000;
|
|
}
|
|
if ((j >= 4) && (j <= 34)) {
|
|
/* rest is 256 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x10000 + 0x10000 * (j - 4);
|
|
}
|
|
}
|
|
break;
|
|
case 0:
|
|
cfm_flash_init (&flash_info[i]);
|
|
break;
|
|
default:
|
|
panic ("configured to many flash banks!\n");
|
|
}
|
|
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_FLASH_BASE,
|
|
CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
#define CMD_READ_ARRAY 0x00F0
|
|
#define CMD_UNLOCK1 0x00AA
|
|
#define CMD_UNLOCK2 0x0055
|
|
#define CMD_ERASE_SETUP 0x0080
|
|
#define CMD_ERASE_CONFIRM 0x0030
|
|
#define CMD_PROGRAM 0x00A0
|
|
#define CMD_UNLOCK_BYPASS 0x0020
|
|
|
|
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
|
|
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
|
|
|
|
|
|
#define BIT_ERASE_DONE 0x0080
|
|
#define BIT_RDY_MASK 0x0080
|
|
#define BIT_PROGRAM_ERROR 0x0020
|
|
#define BIT_TIMEOUT 0x80000000 /* our flag */
|
|
|
|
#define ERR_READY -1
|
|
|
|
int amd_flash_erase_sector(flash_info_t * info, int sector)
|
|
{
|
|
int state;
|
|
ulong result;
|
|
ulong start;
|
|
|
|
volatile u16 *addr =
|
|
(volatile u16 *) (info->start[sector]);
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
*addr = CMD_ERASE_CONFIRM;
|
|
|
|
/* wait until flash is ready */
|
|
state = 0;
|
|
start = get_timer(0);
|
|
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
state = ERR_TIMOUT;
|
|
}
|
|
|
|
if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
|
|
state = ERR_READY;
|
|
}
|
|
while (!state);
|
|
if (state == ERR_READY)
|
|
state = ERR_OK;
|
|
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
|
|
return state;
|
|
}
|
|
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int iflag, cflag;
|
|
int sector;
|
|
int rc;
|
|
|
|
rc = ERR_OK;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
{
|
|
rc = ERR_UNKNOWN_FLASH_TYPE;
|
|
} /* (info->flash_id == FLASH_UNKNOWN) */
|
|
|
|
if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
|
|
{
|
|
rc = ERR_INVAL;
|
|
}
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
|
|
|
|
if (info->protect[sector])
|
|
{
|
|
putc('P'); /* protected sector will not erase */
|
|
}
|
|
else
|
|
{
|
|
/* erase on unprotected sector */
|
|
puts("E\b");
|
|
switch (info->flash_id & FLASH_VENDMASK)
|
|
{
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
rc = amd_flash_erase_sector(info,sector);
|
|
break;
|
|
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
|
|
rc = cfm_flash_erase_sector(info,sector);
|
|
break;
|
|
default:
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
putc('.');
|
|
}
|
|
}
|
|
if (rc!=ERR_OK)
|
|
{
|
|
printf ("\n ");
|
|
flash_perror (rc);
|
|
}
|
|
else
|
|
{
|
|
printf (" done\n");
|
|
}
|
|
|
|
udelay (10000); /* allow flash to settle - wait 10 ms */
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
|
|
{
|
|
volatile u16 *addr;
|
|
ulong result;
|
|
int cflag, iflag;
|
|
int state;
|
|
ulong start;
|
|
|
|
/*
|
|
* Check if Flash is (sufficiently) erased
|
|
*/
|
|
addr = (volatile u16 *) dest;
|
|
|
|
result = *addr;
|
|
if ((result & data) != data)
|
|
return ERR_NOT_ERASED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_PROGRAM;
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
/* wait until flash is ready */
|
|
state = 0;
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
state = ERR_TIMOUT;
|
|
}
|
|
if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
|
|
state = ERR_READY;
|
|
|
|
} while (!state);
|
|
|
|
*addr = CMD_READ_ARRAY;
|
|
|
|
if (state == ERR_READY)
|
|
state = ERR_OK;
|
|
if ((*addr != data) && (state != ERR_TIMOUT))
|
|
state = ERR_PROG_ERROR;
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return state;
|
|
}
|
|
|
|
int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
int rc;
|
|
ulong dest;
|
|
u16 data;
|
|
|
|
rc = ERR_OK;
|
|
if (addr & 1)
|
|
{
|
|
debug ("Byte alignment not supported\n");
|
|
rc = ERR_ALIGN;
|
|
}
|
|
if (cnt & 1)
|
|
{
|
|
debug ("Byte transfer not supported\n");
|
|
rc = ERR_ALIGN;
|
|
}
|
|
|
|
dest = addr;
|
|
while ((cnt>=2) && (rc == ERR_OK))
|
|
{
|
|
data = *((volatile u16 *) src);
|
|
rc=amd_write_word (info,dest,data);
|
|
src +=2;
|
|
dest +=2;
|
|
cnt -=2;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
int rc;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK)
|
|
{
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
rc = amd_flash_write_buff(info,src,addr,cnt);
|
|
break;
|
|
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
|
|
rc = cfm_flash_write_buff(info,src,addr,cnt);
|
|
break;
|
|
default:
|
|
rc = ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
return rc;
|
|
|
|
}
|
|
int amd_flash_protect(flash_info_t * info,long sector,int prot)
|
|
{
|
|
int rc;
|
|
rc= ERR_OK;
|
|
if (prot)
|
|
{
|
|
info->protect[sector]=1;
|
|
}
|
|
else
|
|
{
|
|
info->protect[sector]=0;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FLASH_PROTECTION
|
|
|
|
int flash_real_protect(flash_info_t * info,long sector,int prot)
|
|
{
|
|
int rc;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK)
|
|
{
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
rc = amd_flash_protect(info,sector,prot);
|
|
break;
|
|
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
|
|
rc = cfm_flash_protect(info,sector,prot);
|
|
break;
|
|
default:
|
|
rc = ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
#endif
|