u-boot/board/freescale/m54455evb/m54455evb.c
Simon Glass 52c411805c board_f: Drop board_type parameter from initdram()
It looks like only cm5200 and tqm8xx use this feature, so we don't really
need it in generic code. Drop it and have the users access gd->board_type
directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:58:44 -04:00

213 lines
5.2 KiB
C

/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("Board: ");
puts("Freescale M54455 EVB\n");
return 0;
};
phys_size_t initdram(void)
{
u32 dramsize;
#ifdef CONFIG_CF_SBF
/*
* Serial Boot: The dram is already initialized in start.S
* only require to return DRAM size
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
#else
sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
for (i = 0x13; i < 0x20; i++) {
if (dramsize == (1 << i))
break;
}
i--;
out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
out_be32(&sdram->sdcs1, CONFIG_SYS_SDRAM_BASE1 | i);
out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD | 0x408);
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x300);
udelay(500);
/* Issue PALL */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x200);
out_be32(&sdram->sdcr,
(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
#endif
return (dramsize << 1);
};
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("DRAM test not implemented!\n");
return (0);
}
#if defined(CONFIG_CMD_IDE)
#include <ata.h>
int ide_preinit(void)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
u32 tmp;
tmp = (in_8(&gpio->par_fec) & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
setbits_8(&gpio->par_fec, tmp);
tmp = ((in_be16(&gpio->par_feci2c) & 0xf0ff) |
(GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW));
setbits_be16(&gpio->par_feci2c, tmp);
setbits_be16(&gpio->par_ata,
GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 |
GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
GPIO_PAR_ATA_IORDY_IORDY);
setbits_be16(&gpio->par_pci,
GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
return (0);
}
void ide_set_reset(int idereset)
{
atac_t *ata = (atac_t *) MMAP_ATA;
long period;
/* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
int piotms[5][9] = {
{70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
{50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */
{30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */
{30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */
{25, 70, 20, 10, 20, 5, 10, 0, 35}
}; /* PIO 4 */
if (idereset) {
/* control reset */
out_8(&ata->cr, 0);
udelay(10000);
} else {
#define CALC_TIMING(t) (t + period - 1) / period
period = 1000000000 / gd->bus_clk; /* period in ns */
/*ata->ton = CALC_TIMING (180); */
out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
/* IORDY enable */
out_8(&ata->cr, 0x40);
udelay(200000);
/* IORDY enable */
setbits_8(&ata->cr, 0x01);
}
}
#endif
#if defined(CONFIG_PCI)
/*
* Initialize PCI devices, report devices found.
*/
static struct pci_controller hose;
extern void pci_mcf5445x_init(struct pci_controller *hose);
void pci_init_board(void)
{
pci_mcf5445x_init(&hose);
}
#endif /* CONFIG_PCI */
#if defined(CONFIG_FLASH_CFI_LEGACY)
#include <flash.h>
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
int sect[] = CONFIG_SYS_ATMEL_SECT;
int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
int i, j, k;
if (base != CONFIG_SYS_ATMEL_BASE)
return 0;
info->flash_id = 0x01000000;
info->portwidth = 1;
info->chipwidth = 1;
info->buffer_size = 1;
info->erase_blk_tout = 16384;
info->write_tout = 2;
info->buffer_write_tout = 5;
info->vendor = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */
info->cmd_reset = 0x00F0;
info->interface = FLASH_CFI_X8;
info->legacy_unlock = 0;
info->manufacturer_id = (u16) ATM_MANUFACT;
info->device_id = ATM_ID_LV040;
info->device_id2 = 0;
info->ext_addr = 0;
info->cfi_version = 0x3133;
info->cfi_offset = 0x0000;
info->addr_unlock1 = 0x00000555;
info->addr_unlock2 = 0x000002AA;
info->name = "CFI conformant";
info->size = 0;
info->sector_count = CONFIG_SYS_ATMEL_TOTALSECT;
info->start[0] = base;
for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
info->size += sect[i] * sectsz[i];
for (j = 0; j < sect[i]; j++, k++) {
info->start[k + 1] = info->start[k] + sectsz[i];
info->protect[k] = 0;
}
}
return 1;
}
#endif /* CONFIG_SYS_FLASH_CFI */