mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-10-20 21:14:49 +00:00
52c411805c
It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
452 lines
11 KiB
C
452 lines
11 KiB
C
/*
|
|
* (C) Copyright 2005-2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2006
|
|
* DAVE Srl <www.dave-tech.it>
|
|
*
|
|
* (C) Copyright 2002-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include "sdram.h"
|
|
#include "ecc.h"
|
|
|
|
#ifdef CONFIG_SDRAM_BANK0
|
|
|
|
#ifndef CONFIG_440
|
|
|
|
#ifndef CONFIG_SYS_SDRAM_TABLE
|
|
sdram_conf_t mb0cf[] = {
|
|
{(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
|
|
{(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
|
|
{(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
|
|
{(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
|
|
{(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
|
|
};
|
|
#else
|
|
sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
|
|
#endif
|
|
|
|
#define N_MB0CF (ARRAY_SIZE(mb0cf))
|
|
|
|
#ifdef CONFIG_SYS_SDRAM_CASL
|
|
static ulong ns2clks(ulong ns)
|
|
{
|
|
ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
|
|
|
|
return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
|
|
}
|
|
#endif /* CONFIG_SYS_SDRAM_CASL */
|
|
|
|
static ulong compute_sdtr1(ulong speed)
|
|
{
|
|
#ifdef CONFIG_SYS_SDRAM_CASL
|
|
ulong tmp;
|
|
ulong sdtr1 = 0;
|
|
|
|
/* CASL */
|
|
if (CONFIG_SYS_SDRAM_CASL < 2)
|
|
sdtr1 |= (1 << SDRAM0_TR_CASL);
|
|
else
|
|
if (CONFIG_SYS_SDRAM_CASL > 4)
|
|
sdtr1 |= (3 << SDRAM0_TR_CASL);
|
|
else
|
|
sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
|
|
|
|
/* PTA */
|
|
tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
|
|
if ((tmp >= 2) && (tmp <= 4))
|
|
sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
|
|
else
|
|
sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
|
|
|
|
/* CTP */
|
|
tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
|
|
if ((tmp >= 2) && (tmp <= 4))
|
|
sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
|
|
else
|
|
sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
|
|
|
|
/* LDF */
|
|
tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
|
|
if ((tmp >= 2) && (tmp <= 4))
|
|
sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
|
|
else
|
|
sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
|
|
|
|
/* RFTA */
|
|
tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
|
|
if ((tmp >= 4) && (tmp <= 10))
|
|
sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
|
|
else
|
|
sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
|
|
|
|
/* RCD */
|
|
tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
|
|
if ((tmp >= 2) && (tmp <= 4))
|
|
sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
|
|
else
|
|
sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
|
|
|
|
return sdtr1;
|
|
#else /* CONFIG_SYS_SDRAM_CASL */
|
|
/*
|
|
* If no values are configured in the board config file
|
|
* use the default values, which seem to be ok for most
|
|
* boards.
|
|
*
|
|
* REMARK:
|
|
* For new board ports we strongly recommend to define the
|
|
* correct values for the used SDRAM chips in your board
|
|
* config file (see PPChameleonEVB.h)
|
|
*/
|
|
if (speed > 100000000) {
|
|
/*
|
|
* 133 MHz SDRAM
|
|
*/
|
|
return 0x01074015;
|
|
} else {
|
|
/*
|
|
* default: 100 MHz SDRAM
|
|
*/
|
|
return 0x0086400d;
|
|
}
|
|
#endif /* CONFIG_SYS_SDRAM_CASL */
|
|
}
|
|
|
|
/* refresh is expressed in ms */
|
|
static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
|
|
{
|
|
#ifdef CONFIG_SYS_SDRAM_CASL
|
|
ulong tmp;
|
|
|
|
tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
|
|
tmp /= 1000000;
|
|
|
|
return ((tmp & 0x00003FF8) << 16);
|
|
#else /* CONFIG_SYS_SDRAM_CASL */
|
|
if (speed > 100000000) {
|
|
/*
|
|
* 133 MHz SDRAM
|
|
*/
|
|
return 0x07f00000;
|
|
} else {
|
|
/*
|
|
* default: 100 MHz SDRAM
|
|
*/
|
|
return 0x05f00000;
|
|
}
|
|
#endif /* CONFIG_SYS_SDRAM_CASL */
|
|
}
|
|
|
|
/*
|
|
* Autodetect onboard SDRAM on 405 platforms
|
|
*/
|
|
phys_size_t initdram(void)
|
|
{
|
|
ulong speed;
|
|
ulong sdtr1;
|
|
int i;
|
|
|
|
/*
|
|
* Determine SDRAM speed
|
|
*/
|
|
speed = get_bus_freq(0); /* parameter not used on ppc4xx */
|
|
|
|
/*
|
|
* sdtr1 (register SDRAM0_TR) must take into account timings listed
|
|
* in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
|
|
* account actual SDRAM size. So we can set up sdtr1 according to what
|
|
* is specified in board configuration file while rtr dependds on SDRAM
|
|
* size we are assuming before detection.
|
|
*/
|
|
sdtr1 = compute_sdtr1(speed);
|
|
|
|
for (i=0; i<N_MB0CF; i++) {
|
|
/*
|
|
* Disable memory controller.
|
|
*/
|
|
mtsdram(SDRAM0_CFG, 0x00000000);
|
|
|
|
/*
|
|
* Set MB0CF for bank 0.
|
|
*/
|
|
mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
|
|
mtsdram(SDRAM0_TR, sdtr1);
|
|
mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
|
|
|
|
udelay(200);
|
|
|
|
/*
|
|
* Set memory controller options reg, MCOPT1.
|
|
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
|
|
* read/prefetch.
|
|
*/
|
|
mtsdram(SDRAM0_CFG, 0x80800000);
|
|
|
|
udelay(10000);
|
|
|
|
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
|
|
phys_size_t size = mb0cf[i].size;
|
|
|
|
/*
|
|
* OK, size detected. Enable second bank if
|
|
* defined (assumes same type as bank 0)
|
|
*/
|
|
#ifdef CONFIG_SDRAM_BANK1
|
|
mtsdram(SDRAM0_CFG, 0x00000000);
|
|
mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
|
|
mtsdram(SDRAM0_CFG, 0x80800000);
|
|
udelay(10000);
|
|
|
|
/*
|
|
* Check if 2nd bank is really available.
|
|
* If the size not equal to the size of the first
|
|
* bank, then disable the 2nd bank completely.
|
|
*/
|
|
if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
|
|
mb0cf[i].size) {
|
|
mtsdram(SDRAM0_B1CR, 0);
|
|
mtsdram(SDRAM0_CFG, 0);
|
|
} else {
|
|
/*
|
|
* We have two identical banks, so the size
|
|
* is twice the bank size
|
|
*/
|
|
size = 2 * size;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* OK, size detected -> all done
|
|
*/
|
|
return size;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* CONFIG_440 */
|
|
|
|
/*
|
|
* Define some default values. Those can be overwritten in the
|
|
* board config file.
|
|
*/
|
|
|
|
#ifndef CONFIG_SYS_SDRAM_TABLE
|
|
sdram_conf_t mb0cf[] = {
|
|
{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
|
|
{(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
|
|
{(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
|
|
};
|
|
#else
|
|
sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_SDRAM0_TR0
|
|
#define CONFIG_SYS_SDRAM0_TR0 0x41094012
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_SDRAM0_WDDCTR
|
|
#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_SDRAM0_RTR
|
|
#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_SDRAM0_CFG0
|
|
#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
|
|
#endif
|
|
|
|
#define N_MB0CF (ARRAY_SIZE(mb0cf))
|
|
|
|
#define NUM_TRIES 64
|
|
#define NUM_READS 10
|
|
|
|
static void sdram_tr1_set(int ram_address, int* tr1_value)
|
|
{
|
|
int i;
|
|
int j, k;
|
|
volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
|
|
int first_good = -1, last_bad = 0x1ff;
|
|
|
|
unsigned long test[NUM_TRIES] = {
|
|
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
|
|
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
|
|
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
|
|
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
|
|
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
|
|
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
|
|
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
|
|
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
|
|
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
|
|
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
|
|
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
|
|
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
|
|
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
|
|
|
|
/* go through all possible SDRAM0_TR1[RDCT] values */
|
|
for (i=0; i<=0x1ff; i++) {
|
|
/* set the current value for TR1 */
|
|
mtsdram(SDRAM0_TR1, (0x80800800 | i));
|
|
|
|
/* write values */
|
|
for (j=0; j<NUM_TRIES; j++) {
|
|
ram_pointer[j] = test[j];
|
|
|
|
/* clear any cache at ram location */
|
|
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
|
|
}
|
|
|
|
/* read values back */
|
|
for (j=0; j<NUM_TRIES; j++) {
|
|
for (k=0; k<NUM_READS; k++) {
|
|
/* clear any cache at ram location */
|
|
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
|
|
|
|
if (ram_pointer[j] != test[j])
|
|
break;
|
|
}
|
|
|
|
/* read error */
|
|
if (k != NUM_READS)
|
|
break;
|
|
}
|
|
|
|
/* we have a SDRAM0_TR1[RDCT] that is part of the window */
|
|
if (j == NUM_TRIES) {
|
|
if (first_good == -1)
|
|
first_good = i; /* found beginning of window */
|
|
} else { /* bad read */
|
|
/* if we have not had a good read then don't care */
|
|
if (first_good != -1) {
|
|
/* first failure after a good read */
|
|
last_bad = i-1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* return the current value for TR1 */
|
|
*tr1_value = (first_good + last_bad) / 2;
|
|
}
|
|
|
|
/*
|
|
* Autodetect onboard DDR SDRAM on 440 platforms
|
|
*
|
|
* NOTE: Some of the hardcoded values are hardware dependant,
|
|
* so this should be extended for other future boards
|
|
* using this routine!
|
|
*/
|
|
phys_size_t initdram(void)
|
|
{
|
|
int i;
|
|
int tr1_bank1;
|
|
|
|
#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
|
|
defined(CONFIG_440GR) || defined(CONFIG_440SP)
|
|
/*
|
|
* Soft-reset SDRAM controller.
|
|
*/
|
|
mtsdr(SDR0_SRST, SDR0_SRST_DMC);
|
|
mtsdr(SDR0_SRST, 0x00000000);
|
|
#endif
|
|
|
|
for (i=0; i<N_MB0CF; i++) {
|
|
/*
|
|
* Disable memory controller.
|
|
*/
|
|
mtsdram(SDRAM0_CFG0, 0x00000000);
|
|
|
|
/*
|
|
* Setup some default
|
|
*/
|
|
mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
|
|
mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
|
|
mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
|
|
mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
|
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
|
|
mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
|
|
mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
|
|
mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
|
|
mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
|
|
udelay(400); /* Delay 200 usecs (min) */
|
|
|
|
/*
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*/
|
|
mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
|
|
udelay(10000);
|
|
|
|
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
|
|
phys_size_t size = mb0cf[i].size;
|
|
/*
|
|
* Optimize TR1 to current hardware environment
|
|
*/
|
|
sdram_tr1_set(0x00000000, &tr1_bank1);
|
|
mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
|
|
|
|
|
|
/*
|
|
* OK, size detected. Enable second bank if
|
|
* defined (assumes same type as bank 0)
|
|
*/
|
|
#ifdef CONFIG_SDRAM_BANK1
|
|
mtsdram(SDRAM0_CFG0, 0);
|
|
mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
|
|
mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
|
|
udelay(10000);
|
|
|
|
/*
|
|
* Check if 2nd bank is really available.
|
|
* If the size not equal to the size of the first
|
|
* bank, then disable the 2nd bank completely.
|
|
*/
|
|
if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
|
|
!= mb0cf[i].size) {
|
|
mtsdram(SDRAM0_CFG0, 0);
|
|
mtsdram(SDRAM0_B1CR, 0);
|
|
mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
|
|
udelay(10000);
|
|
} else {
|
|
/*
|
|
* We have two identical banks, so the size
|
|
* is twice the bank size
|
|
*/
|
|
size = 2 * size;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SDRAM_ECC
|
|
ecc_init(0, size);
|
|
#endif
|
|
|
|
/*
|
|
* OK, size detected -> all done
|
|
*/
|
|
return size;
|
|
}
|
|
}
|
|
|
|
return 0; /* nothing found ! */
|
|
}
|
|
|
|
#endif /* CONFIG_440 */
|
|
|
|
#endif /* CONFIG_SDRAM_BANK0 */
|