u-boot/arch/arm/dts/vf-colibri.dtsi
Marcel Ziswiler 75b942df87 colibri_vf: fix ethernet by adding explicit phy node
The implicit fallback mechanism for searching the whole MDIO bus for at
least one PHY has been gone with the following commit b882005a18
("drivers/net/fec: phy_init: remove redundant logic"). This lead to the
Ethernet driver erroring out as follows:

Net:   Could not get PHY for FEC0: addr -19
eth-1: fec@400d1000
Colibri VFxx # dhcp
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
No ethernet found.
Could not get PHY for FEC0: addr -19
Colibri VFxx #

This commit adds an explicit PHY node which makes it work again.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00

243 lines
6.2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2014-2019 Toradex AG
*/
/dts-v1/;
#include "vf.dtsi"
#include "vf610-pinfunc.h"
/ {
chosen {
stdout-path = &uart0;
};
aliases {
usb0 = &ehci0; /* required for ums */
};
reg_usbh_vbus: regulator-usbh-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_reg>;
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN */
};
};
&dspi1 {
bus-num = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
spi_cmd: sspi@0 {
reg = <0>;
spi-max-frequency = <50000000>;
};
};
&ehci0 {
dr_mode = "otg";
fsl,cdet-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&ehci1 {
dr_mode = "host";
status = "okay";
vbus-supply = <&reg_usbh_vbus>;
};
&esdhc1 {
bus-width = <4>;
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
status = "okay";
};
/* Ethernet */
&fec1 {
phy-mode = "rmii";
phy-handle = <&ethphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
max-speed = <100>;
reg = <1>;
};
};
};
&i2c0 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
/* M41T0M6 real time clock on carrier board */
rtc: m41t0m6@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ddr>;
pinctrl_ddr: ddrgrp {
fsl,pins = <
VF610_PAD_DDR_A15__DDR_A_15 0x180
VF610_PAD_DDR_A14__DDR_A_14 0x180
VF610_PAD_DDR_A13__DDR_A_13 0x180
VF610_PAD_DDR_A12__DDR_A_12 0x180
VF610_PAD_DDR_A11__DDR_A_11 0x180
VF610_PAD_DDR_A10__DDR_A_10 0x180
VF610_PAD_DDR_A9__DDR_A_9 0x180
VF610_PAD_DDR_A8__DDR_A_8 0x180
VF610_PAD_DDR_A7__DDR_A_7 0x180
VF610_PAD_DDR_A6__DDR_A_6 0x180
VF610_PAD_DDR_A5__DDR_A_5 0x180
VF610_PAD_DDR_A4__DDR_A_4 0x180
VF610_PAD_DDR_A3__DDR_A_3 0x180
VF610_PAD_DDR_A2__DDR_A_2 0x180
VF610_PAD_DDR_A1__DDR_A_1 0x180
VF610_PAD_DDR_A0__DDR_A_0 0x180
VF610_PAD_DDR_BA2__DDR_BA_2 0x180
VF610_PAD_DDR_BA1__DDR_BA_1 0x180
VF610_PAD_DDR_BA0__DDR_BA_0 0x180
VF610_PAD_DDR_CAS__DDR_CAS_B 0x180
VF610_PAD_DDR_CKE__DDR_CKE_0 0x180
VF610_PAD_DDR_CLK__DDR_CLK_0 0x180
VF610_PAD_DDR_CS__DDR_CS_B_0 0x180
VF610_PAD_DDR_D15__DDR_D_15 0x10180
VF610_PAD_DDR_D14__DDR_D_14 0x10180
VF610_PAD_DDR_D13__DDR_D_13 0x10180
VF610_PAD_DDR_D12__DDR_D_12 0x10180
VF610_PAD_DDR_D11__DDR_D_11 0x10180
VF610_PAD_DDR_D10__DDR_D_10 0x10180
VF610_PAD_DDR_D9__DDR_D_9 0x10180
VF610_PAD_DDR_D8__DDR_D_8 0x10180
VF610_PAD_DDR_D7__DDR_D_7 0x10180
VF610_PAD_DDR_D6__DDR_D_6 0x10180
VF610_PAD_DDR_D5__DDR_D_5 0x10180
VF610_PAD_DDR_D4__DDR_D_4 0x10180
VF610_PAD_DDR_D3__DDR_D_3 0x10180
VF610_PAD_DDR_D2__DDR_D_2 0x10180
VF610_PAD_DDR_D1__DDR_D_1 0x10180
VF610_PAD_DDR_D0__DDR_D_0 0x10180
VF610_PAD_DDR_DQM1__DDR_DQM_1 0x10180
VF610_PAD_DDR_DQM0__DDR_DQM_0 0x10180
VF610_PAD_DDR_DQS1__DDR_DQS_1 0x10180
VF610_PAD_DDR_DQS0__DDR_DQS_0 0x10180
VF610_PAD_DDR_RAS__DDR_RAS_B 0x180
VF610_PAD_DDR_WE__DDR_WE_B 0x180
VF610_PAD_DDR_ODT1__DDR_ODT_0 0x180
VF610_PAD_DDR_ODT0__DDR_ODT_1 0x180
VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x180
VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x180
VF610_PAD_DDR_RESETB 0x180
>;
};
pinctrl_dspi1: dspi1grp {
fsl,pins = <
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
VF610_PAD_PTD6__DSPI1_SIN 0x33e1
VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
VF610_PAD_PTD8__DSPI1_SCK 0x33e2
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB20__GPIO_42 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKOUT 0x30df
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30df
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30df
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30df
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30df
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30df
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30df
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30df
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30df
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
VF610_PAD_PTD23__NF_IO7 0x28df
VF610_PAD_PTD22__NF_IO6 0x28df
VF610_PAD_PTD21__NF_IO5 0x28df
VF610_PAD_PTD20__NF_IO4 0x28df
VF610_PAD_PTD19__NF_IO3 0x28df
VF610_PAD_PTD18__NF_IO2 0x28df
VF610_PAD_PTD17__NF_IO1 0x28df
VF610_PAD_PTD16__NF_IO0 0x28df
VF610_PAD_PTB24__NF_WE_B 0x28c2
VF610_PAD_PTB25__NF_CE0_B 0x28c2
VF610_PAD_PTB27__NF_RE_B 0x28c2
VF610_PAD_PTC26__NF_RB_B 0x283d
VF610_PAD_PTC27__NF_ALE 0x28c2
VF610_PAD_PTC28__NF_CLE 0x28c2
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x11af
VF610_PAD_PTB11__UART0_RX 0x11af
VF610_PAD_PTB12__UART0_RTS 0x11af
VF610_PAD_PTB13__UART0_CTS 0x11af
>;
};
pinctrl_usbh1_reg: gpio_usb_vbus {
fsl,pins = <
VF610_PAD_PTD4__GPIO_83 0x22ed
>;
};
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "okay";
};