Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 18:10:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/bsc9132qds/bsc9132qds.c
Jaiprakash Singh 39b0bbbb23 driver/ifc: Add 64KB page support 
IFC has two register pages.Till IFC version 1.4 each
register page is 4KB each.But IFC ver 2.0 register page
size is 64KB each.IFC regiters structure is break into
two viz FCM and RUNTIME.FCM(Flash control machine) registers
are defined in PAGE0 and controls IFC generic functionality.
RUNTIME registers are defined in PAGE1 and controls NAND and
GPCM funcinality.

FCM and RUNTIME structures defination is common for IFC
version 1.4 and 2.0.

Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 16:46:50 -07:00

429 lines
9.3 KiB
C
Raw Blame History

/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/io.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <mmc.h>
#include <netdev.h>
#include <fsl_ifc.h>
#include <hwconfig.h>
#include <i2c.h>
#include <fsl_ddr_sdram.h>
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
#include <flash.h>
#ifdef CONFIG_PCI
#include <pci.h>
#include <asm/fsl_pci.h>
#endif
#include "../common/qixis.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
return 0;
}
void board_config_serdes_mux(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 pordevsr = in_be32(&gur->pordevsr);
u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
switch (srds_cfg) {
/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
case 1:
case 2:
case 3:
case 4:
case 5:
case 22:
case 23:
case 24:
case 25:
case 26:
QIXIS_WRITE_I2C(brdcfg[4], 0x03);
break;
/* PEX(1) PEX(2) SGMII1 CPRI 1 */
case 6:
case 7:
case 8:
case 9:
case 10:
case 27:
case 28:
case 29:
case 30:
case 31:
QIXIS_WRITE_I2C(brdcfg[4], 0x01);
break;
/* PEX(1) PEX(2) SGMII1 SGMII2 */
case 11:
case 32:
QIXIS_WRITE_I2C(brdcfg[4], 0x00);
break;
/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
case 12:
case 13:
case 14:
case 15:
case 16:
case 33:
case 34:
case 35:
case 36:
case 37:
QIXIS_WRITE_I2C(brdcfg[4], 0x07);
break;
/* PEX(1) SGMII2 SGMII1 CPRI 1 */
case 17:
case 18:
case 19:
case 20:
case 21:
case 38:
case 39:
case 40:
case 41:
case 42:
QIXIS_WRITE_I2C(brdcfg[4], 0x05);
break;
/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
case 43:
case 44:
case 45:
case 46:
case 47:
QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
break;
default:
break;
}
}
/* Configure DSP DDR controller */
void dsp_ddr_configure(void)
{
/*
*There are separate DDR-controllers for DSP and PowerPC side DDR.
*copy the ddr controller settings from PowerPC side DDR controller
*to the DSP DDR controller as connected DDR memories are similar.
*/
struct ccsr_ddr __iomem *pa_ddr =
(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
struct ccsr_ddr temp_ddr;
struct ccsr_ddr __iomem *dsp_ddr =
(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
}
int board_early_init_r(void)
{
#ifndef CONFIG_SYS_NO_FLASH
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_64M, 1);
set_tlb(1, flashbase + 0x4000000,
CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
#endif
board_config_serdes_mux();
dsp_ddr_configure();
return 0;
}
#ifdef CONFIG_PCI
void pci_init_board(void)
{
fsl_pcie_init_board(0);
}
#endif /* ifdef CONFIG_PCI */
int checkboard(void)
{
struct cpu_type *cpu;
u8 sw;
cpu = gd->arch.cpu;
printf("Board: %sQDS\n", cpu->name);
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
printf("IFC chip select:");
switch (sw) {
case 0:
printf("NOR\n");
break;
case 2:
printf("Promjet\n");
break;
case 4:
printf("NAND\n");
break;
default:
printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
break;
}
return 0;
}
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
num++;
#endif
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
#ifdef CONFIG_PCI
pci_eth_init(bis);
#endif
return 0;
}
#endif
#define USBMUX_SEL_MASK 0xc0
#define USBMUX_SEL_UART2 0xc0
#define USBMUX_SEL_USB 0x40
#define SPIMUX_SEL_UART3 0x80
#define GPS_MUX_SEL_GPS 0x40
#define TSEC_1588_CLKIN_MASK 0x03
#define CON_XCVR_REF_CLK 0x00
int misc_init_r(void)
{
u8 val;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 porbmsr = in_be32(&gur->porbmsr);
u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
/*Configure 1588 clock-in source from RF Card*/
val = QIXIS_READ_I2C(brdcfg[5]);
QIXIS_WRITE_I2C(brdcfg[5],
(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
if (hwconfig("uart2") && hwconfig("usb1")) {
printf("UART2 and USB cannot work together on the board\n");
printf("Remove one from hwconfig and reset\n");
} else {
if (hwconfig("uart2")) {
val = QIXIS_READ_I2C(brdcfg[5]);
QIXIS_WRITE_I2C(brdcfg[5],
(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
clrbits_be32(&gur->pmuxcr3,
MPC85xx_PMUXCR3_USB_SEL_MASK);
setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
} else {
/* By default USB should be selected.
* Programming FPGA to select USB. */
val = QIXIS_READ_I2C(brdcfg[5]);
QIXIS_WRITE_I2C(brdcfg[5],
(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
}
}
if (hwconfig("sim")) {
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
romloc == PORBMSR_ROMLOC_NOR ||
romloc == PORBMSR_ROMLOC_SPI) {
val = QIXIS_READ_I2C(brdcfg[3]);
QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
clrbits_be32(&gur->pmuxcr,
MPC85xx_PMUXCR0_SIM_SEL_MASK);
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
}
}
if (hwconfig("uart3")) {
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
romloc == PORBMSR_ROMLOC_NOR ||
romloc == PORBMSR_ROMLOC_SDHC) {
/* UART3 and SPI1 (Flashes) are muxed together */
val = QIXIS_READ_I2C(brdcfg[3]);
QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
clrbits_be32(&gur->pmuxcr3,
MPC85xx_PMUXCR3_UART3_SEL_MASK);
setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
/* MUX to select UART3 connection to J24 header
* or to GPS */
val = QIXIS_READ_I2C(brdcfg[6]);
if (hwconfig("gps"))
QIXIS_WRITE_I2C(brdcfg[6],
(val | GPS_MUX_SEL_GPS));
else
QIXIS_WRITE_I2C(brdcfg[6],
(val & ~(GPS_MUX_SEL_GPS)));
}
}
return 0;
}
void fdt_del_node_compat(void *blob, const char *compatible)
{
int err;
int off = fdt_node_offset_by_compatible(blob, -1, compatible);
if (off < 0) {
printf("WARNING: could not find compatible node %s: %s.\n",
compatible, fdt_strerror(off));
return;
}
err = fdt_del_node(blob, off);
if (err < 0) {
printf("WARNING: could not remove %s: %s.\n",
compatible, fdt_strerror(err));
}
}
#if defined(CONFIG_OF_BOARD_SETUP)
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
struct node_info nodes[] = {
{ "cfi-flash", MTD_DEV_TYPE_NOR, },
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
};
#endif
int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
#if defined(CONFIG_PCI)
FT_FSL_PCI_SETUP;
#endif
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 porbmsr = in_be32(&gur->porbmsr);
u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
if (!(hwconfig("uart2") && hwconfig("usb1"))) {
/* If uart2 is there in hwconfig remove usb node from
* device tree */
if (hwconfig("uart2")) {
/* remove dts usb node */
fdt_del_node_compat(blob, "fsl-usb2-dr");
} else {
fdt_fixup_dr_usb(blob, bd);
fdt_del_node_and_alias(blob, "serial2");
}
}
if (hwconfig("uart3")) {
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
romloc == PORBMSR_ROMLOC_NOR ||
romloc == PORBMSR_ROMLOC_SDHC)
/* Delete SPI node from the device tree */
fdt_del_node_and_alias(blob, "spi1");
} else
fdt_del_node_and_alias(blob, "serial3");
if (hwconfig("sim")) {
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
romloc == PORBMSR_ROMLOC_NOR ||
romloc == PORBMSR_ROMLOC_SPI) {
/* remove dts sdhc node */
fdt_del_node_compat(blob, "fsl,esdhc");
} else if (romloc == PORBMSR_ROMLOC_SDHC) {
/* remove dts sim node */
fdt_del_node_compat(blob, "fsl,sim-v1.0");
printf("SIM & SDHC can't work together on the board");
printf("\nRemove sim from hwconfig and reset\n");
}
}
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink