mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
456 lines
9.2 KiB
C
456 lines
9.2 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
|
|
#include <mpc5xxx.h>
|
|
#include <i2c.h>
|
|
|
|
#if !defined(CONFIG_I2C_MULTI_BUS)
|
|
#if (CONFIG_SYS_I2C_MODULE == 2)
|
|
#define I2C_BASE MPC5XXX_I2C2
|
|
#elif (CONFIG_SYS_I2C_MODULE == 1)
|
|
#define I2C_BASE MPC5XXX_I2C1
|
|
#else
|
|
#error CONFIG_SYS_I2C_MODULE is not properly configured
|
|
#endif
|
|
#else
|
|
static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
|
|
CONFIG_SYS_SPD_BUS_NUM;
|
|
static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED,
|
|
CONFIG_SYS_I2C_SPEED};
|
|
|
|
static const unsigned long i2c_dev[2] = {
|
|
MPC5XXX_I2C1,
|
|
MPC5XXX_I2C2,
|
|
};
|
|
|
|
#define I2C_BASE ((struct mpc5xxx_i2c *)i2c_dev[i2c_bus_num])
|
|
#endif
|
|
|
|
#define I2C_TIMEOUT 6667
|
|
#define I2C_RETRIES 3
|
|
|
|
struct mpc5xxx_i2c_tap {
|
|
int scl2tap;
|
|
int tap2tap;
|
|
};
|
|
|
|
static int mpc_reg_in (volatile u32 *reg);
|
|
static void mpc_reg_out (volatile u32 *reg, int val, int mask);
|
|
static int wait_for_bb (void);
|
|
static int wait_for_pin (int *status);
|
|
static int do_address (uchar chip, char rdwr_flag);
|
|
static int send_bytes (uchar chip, char *buf, int len);
|
|
static int receive_bytes (uchar chip, char *buf, int len);
|
|
static int mpc_get_fdr (int);
|
|
|
|
static int mpc_reg_in(volatile u32 *reg)
|
|
{
|
|
int ret = *reg >> 24;
|
|
__asm__ __volatile__ ("eieio");
|
|
return ret;
|
|
}
|
|
|
|
static void mpc_reg_out(volatile u32 *reg, int val, int mask)
|
|
{
|
|
int tmp;
|
|
|
|
if (!mask) {
|
|
*reg = val << 24;
|
|
} else {
|
|
tmp = mpc_reg_in(reg);
|
|
*reg = ((tmp & ~mask) | (val & mask)) << 24;
|
|
}
|
|
__asm__ __volatile__ ("eieio");
|
|
|
|
return;
|
|
}
|
|
|
|
static int wait_for_bb(void)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int timeout = I2C_TIMEOUT;
|
|
int status;
|
|
|
|
status = mpc_reg_in(®s->msr);
|
|
|
|
while (timeout-- && (status & I2C_BB)) {
|
|
mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
|
|
(void)mpc_reg_in(®s->mdr);
|
|
mpc_reg_out(®s->mcr, 0, I2C_STA);
|
|
mpc_reg_out(®s->mcr, 0, 0);
|
|
mpc_reg_out(®s->mcr, I2C_EN, 0);
|
|
udelay(15);
|
|
status = mpc_reg_in(®s->msr);
|
|
}
|
|
|
|
return (status & I2C_BB);
|
|
}
|
|
|
|
static int wait_for_pin(int *status)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int timeout = I2C_TIMEOUT;
|
|
|
|
*status = mpc_reg_in(®s->msr);
|
|
|
|
while (timeout-- && !(*status & I2C_IF)) {
|
|
udelay(15);
|
|
*status = mpc_reg_in(®s->msr);
|
|
}
|
|
|
|
if (!(*status & I2C_IF)) {
|
|
return -1;
|
|
}
|
|
|
|
mpc_reg_out(®s->msr, 0, I2C_IF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_address(uchar chip, char rdwr_flag)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int status;
|
|
|
|
chip <<= 1;
|
|
|
|
if (rdwr_flag) {
|
|
chip |= 1;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_TX, I2C_TX);
|
|
mpc_reg_out(®s->mdr, chip, 0);
|
|
|
|
if (wait_for_pin(&status)) {
|
|
return -2;
|
|
}
|
|
|
|
if (status & I2C_RXAK) {
|
|
return -3;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int send_bytes(uchar chip, char *buf, int len)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int wrcount;
|
|
int status;
|
|
|
|
for (wrcount = 0; wrcount < len; ++wrcount) {
|
|
|
|
mpc_reg_out(®s->mdr, buf[wrcount], 0);
|
|
|
|
if (wait_for_pin(&status)) {
|
|
break;
|
|
}
|
|
|
|
if (status & I2C_RXAK) {
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
return !(wrcount == len);
|
|
}
|
|
|
|
static int receive_bytes(uchar chip, char *buf, int len)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int dummy = 1;
|
|
int rdcount = 0;
|
|
int status;
|
|
int i;
|
|
|
|
mpc_reg_out(®s->mcr, 0, I2C_TX);
|
|
|
|
for (i = 0; i < len; ++i) {
|
|
buf[rdcount] = mpc_reg_in(®s->mdr);
|
|
|
|
if (dummy) {
|
|
dummy = 0;
|
|
} else {
|
|
rdcount++;
|
|
}
|
|
|
|
|
|
if (wait_for_pin(&status)) {
|
|
return -4;
|
|
}
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_TXAK, I2C_TXAK);
|
|
buf[rdcount++] = mpc_reg_in(®s->mdr);
|
|
|
|
if (wait_for_pin(&status)) {
|
|
return -5;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, 0, I2C_TXAK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
|
|
|
|
#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
|
|
#define FDR432(x) (u8) ((x & 0x1C) >> 2)
|
|
/*
|
|
* Reset any i2c devices that may have been interrupted during a system reset.
|
|
* Normally this would be accomplished by clocking the line until SCL and SDA
|
|
* are released and then sending a start condtiion (From an Atmel datasheet).
|
|
* There is no direct access to the i2c pins so instead create start commands
|
|
* through the i2c interface. Send a start command then delay for the SDA Hold
|
|
* time, repeat this by disabling/enabling the bus a total of 9 times.
|
|
*/
|
|
static void send_reset(void)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int i;
|
|
u32 delay;
|
|
u8 fdr;
|
|
int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
|
|
struct mpc5xxx_i2c_tap scltap[] = {
|
|
{4, 1},
|
|
{4, 2},
|
|
{6, 4},
|
|
{6, 8},
|
|
{14, 16},
|
|
{30, 32},
|
|
{62, 64},
|
|
{126, 128}
|
|
};
|
|
|
|
fdr = (u8)mpc_reg_in(®s->mfdr);
|
|
|
|
delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
|
|
scltap[FDR432(fdr)].tap2tap) + 3;
|
|
|
|
for (i = 0; i < 9; i++) {
|
|
mpc_reg_out(®s->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
|
|
udelay(delay);
|
|
mpc_reg_out(®s->mcr, 0, I2C_INIT_MASK);
|
|
udelay(delay);
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
|
|
}
|
|
#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
|
|
|
|
/**************** I2C API ****************/
|
|
|
|
void i2c_init(int speed, int saddr)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
|
|
mpc_reg_out(®s->mcr, 0, 0);
|
|
mpc_reg_out(®s->madr, saddr << 1, 0);
|
|
|
|
/* Set clock
|
|
*/
|
|
mpc_reg_out(®s->mfdr, mpc_get_fdr(speed), 0);
|
|
|
|
/* Enable module
|
|
*/
|
|
mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
|
|
mpc_reg_out(®s->msr, 0, I2C_IF);
|
|
|
|
#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
|
|
send_reset();
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
static int mpc_get_fdr(int speed)
|
|
{
|
|
static int fdr = -1;
|
|
|
|
if (fdr == -1) {
|
|
ulong best_speed = 0;
|
|
ulong divider;
|
|
ulong ipb, scl;
|
|
ulong bestmatch = 0xffffffffUL;
|
|
int best_i = 0, best_j = 0, i, j;
|
|
int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
|
|
struct mpc5xxx_i2c_tap scltap[] = {
|
|
{4, 1},
|
|
{4, 2},
|
|
{6, 4},
|
|
{6, 8},
|
|
{14, 16},
|
|
{30, 32},
|
|
{62, 64},
|
|
{126, 128}
|
|
};
|
|
|
|
ipb = gd->arch.ipb_clk;
|
|
for (i = 7; i >= 0; i--) {
|
|
for (j = 7; j >= 0; j--) {
|
|
scl = 2 * (scltap[j].scl2tap +
|
|
(SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
|
|
if (ipb <= speed*scl) {
|
|
if ((speed*scl - ipb) < bestmatch) {
|
|
bestmatch = speed*scl - ipb;
|
|
best_i = i;
|
|
best_j = j;
|
|
best_speed = ipb/scl;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
|
|
if (gd->flags & GD_FLG_RELOC) {
|
|
fdr = divider;
|
|
} else {
|
|
printf("%ld kHz, ", best_speed / 1000);
|
|
return divider;
|
|
}
|
|
}
|
|
|
|
return fdr;
|
|
}
|
|
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int i;
|
|
|
|
for (i = 0; i < I2C_RETRIES; i++) {
|
|
mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
|
|
|
|
if (! do_address(chip, 0)) {
|
|
mpc_reg_out(®s->mcr, 0, I2C_STA);
|
|
udelay(500);
|
|
break;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, 0, I2C_STA);
|
|
udelay(500);
|
|
}
|
|
|
|
return (i == I2C_RETRIES);
|
|
}
|
|
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
char xaddr[4];
|
|
struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int ret = -1;
|
|
|
|
xaddr[0] = (addr >> 24) & 0xFF;
|
|
xaddr[1] = (addr >> 16) & 0xFF;
|
|
xaddr[2] = (addr >> 8) & 0xFF;
|
|
xaddr[3] = addr & 0xFF;
|
|
|
|
if (wait_for_bb()) {
|
|
printf("i2c_read: bus is busy\n");
|
|
goto Done;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
|
|
if (do_address(chip, 0)) {
|
|
printf("i2c_read: failed to address chip\n");
|
|
goto Done;
|
|
}
|
|
|
|
if (send_bytes(chip, &xaddr[4-alen], alen)) {
|
|
printf("i2c_read: send_bytes failed\n");
|
|
goto Done;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_RSTA, I2C_RSTA);
|
|
if (do_address(chip, 1)) {
|
|
printf("i2c_read: failed to address chip\n");
|
|
goto Done;
|
|
}
|
|
|
|
if (receive_bytes(chip, (char *)buf, len)) {
|
|
printf("i2c_read: receive_bytes failed\n");
|
|
goto Done;
|
|
}
|
|
|
|
ret = 0;
|
|
Done:
|
|
mpc_reg_out(®s->mcr, 0, I2C_STA);
|
|
return ret;
|
|
}
|
|
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
char xaddr[4];
|
|
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
|
|
int ret = -1;
|
|
|
|
xaddr[0] = (addr >> 24) & 0xFF;
|
|
xaddr[1] = (addr >> 16) & 0xFF;
|
|
xaddr[2] = (addr >> 8) & 0xFF;
|
|
xaddr[3] = addr & 0xFF;
|
|
|
|
if (wait_for_bb()) {
|
|
printf("i2c_write: bus is busy\n");
|
|
goto Done;
|
|
}
|
|
|
|
mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
|
|
if (do_address(chip, 0)) {
|
|
printf("i2c_write: failed to address chip\n");
|
|
goto Done;
|
|
}
|
|
|
|
if (send_bytes(chip, &xaddr[4-alen], alen)) {
|
|
printf("i2c_write: send_bytes failed\n");
|
|
goto Done;
|
|
}
|
|
|
|
if (send_bytes(chip, (char *)buf, len)) {
|
|
printf("i2c_write: send_bytes failed\n");
|
|
goto Done;
|
|
}
|
|
|
|
ret = 0;
|
|
Done:
|
|
mpc_reg_out(®s->mcr, 0, I2C_STA);
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_I2C_MULTI_BUS)
|
|
int i2c_set_bus_num(unsigned int bus)
|
|
{
|
|
if (bus > 1)
|
|
return -1;
|
|
|
|
i2c_bus_num = bus;
|
|
i2c_init(i2c_bus_speed[bus], CONFIG_SYS_I2C_SLAVE);
|
|
return 0;
|
|
}
|
|
|
|
int i2c_set_bus_speed(unsigned int speed)
|
|
{
|
|
i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
|
|
return 0;
|
|
}
|
|
|
|
unsigned int i2c_get_bus_num(void)
|
|
{
|
|
return i2c_bus_num;
|
|
}
|
|
|
|
unsigned int i2c_get_bus_speed(void)
|
|
{
|
|
return i2c_bus_speed[i2c_bus_num];
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* CONFIG_HARD_I2C */
|