mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
161 lines
5.3 KiB
C
161 lines
5.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* linux/include/linux/mtd/bbm.h
|
|
*
|
|
* NAND family Bad Block Management (BBM) header file
|
|
* - Bad Block Table (BBT) implementation
|
|
*
|
|
* Copyright © 2005 Samsung Electronics
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* Copyright © 2000-2005
|
|
* Thomas Gleixner <tglx@linuxtronix.de>
|
|
*
|
|
*/
|
|
#ifndef __LINUX_MTD_BBM_H
|
|
#define __LINUX_MTD_BBM_H
|
|
|
|
/* The maximum number of NAND chips in an array */
|
|
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#endif
|
|
|
|
/**
|
|
* struct nand_bbt_descr - bad block table descriptor
|
|
* @options: options for this descriptor
|
|
* @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
|
|
* when bbt is searched, then we store the found bbts pages here.
|
|
* Its an array and supports up to 8 chips now
|
|
* @offs: offset of the pattern in the oob area of the page
|
|
* @veroffs: offset of the bbt version counter in the oob are of the page
|
|
* @version: version read from the bbt page during scan
|
|
* @len: length of the pattern, if 0 no pattern check is performed
|
|
* @maxblocks: maximum number of blocks to search for a bbt. This number of
|
|
* blocks is reserved at the end of the device where the tables are
|
|
* written.
|
|
* @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
|
|
* bad) block in the stored bbt
|
|
* @pattern: pattern to identify bad block table or factory marked good /
|
|
* bad blocks, can be NULL, if len = 0
|
|
*
|
|
* Descriptor for the bad block table marker and the descriptor for the
|
|
* pattern which identifies good and bad blocks. The assumption is made
|
|
* that the pattern and the version count are always located in the oob area
|
|
* of the first block.
|
|
*/
|
|
struct nand_bbt_descr {
|
|
int options;
|
|
int pages[CONFIG_SYS_NAND_MAX_CHIPS];
|
|
int offs;
|
|
int veroffs;
|
|
uint8_t version[CONFIG_SYS_NAND_MAX_CHIPS];
|
|
int len;
|
|
int maxblocks;
|
|
int reserved_block_code;
|
|
uint8_t *pattern;
|
|
};
|
|
|
|
/* Options for the bad block table descriptors */
|
|
|
|
/* The number of bits used per block in the bbt on the device */
|
|
#define NAND_BBT_NRBITS_MSK 0x0000000F
|
|
#define NAND_BBT_1BIT 0x00000001
|
|
#define NAND_BBT_2BIT 0x00000002
|
|
#define NAND_BBT_4BIT 0x00000004
|
|
#define NAND_BBT_8BIT 0x00000008
|
|
/* The bad block table is in the last good block of the device */
|
|
#define NAND_BBT_LASTBLOCK 0x00000010
|
|
/* The bbt is at the given page, else we must scan for the bbt */
|
|
#define NAND_BBT_ABSPAGE 0x00000020
|
|
/* bbt is stored per chip on multichip devices */
|
|
#define NAND_BBT_PERCHIP 0x00000080
|
|
/* bbt has a version counter at offset veroffs */
|
|
#define NAND_BBT_VERSION 0x00000100
|
|
/* Create a bbt if none exists */
|
|
#define NAND_BBT_CREATE 0x00000200
|
|
/*
|
|
* Create an empty BBT with no vendor information. Vendor's information may be
|
|
* unavailable, for example, if the NAND controller has a different data and OOB
|
|
* layout or if this information is already purged. Must be used in conjunction
|
|
* with NAND_BBT_CREATE.
|
|
*/
|
|
#define NAND_BBT_CREATE_EMPTY 0x00000400
|
|
/* Write bbt if neccecary */
|
|
#define NAND_BBT_WRITE 0x00002000
|
|
/* Read and write back block contents when writing bbt */
|
|
#define NAND_BBT_SAVECONTENT 0x00004000
|
|
/* Search good / bad pattern on the first and the second page */
|
|
#define NAND_BBT_SCAN2NDPAGE 0x00008000
|
|
/* Search good / bad pattern on the last page of the eraseblock */
|
|
#define NAND_BBT_SCANLASTPAGE 0x00010000
|
|
/*
|
|
* Use a flash based bad block table. By default, OOB identifier is saved in
|
|
* OOB area. This option is passed to the default bad block table function.
|
|
*/
|
|
#define NAND_BBT_USE_FLASH 0x00020000
|
|
/*
|
|
* Do not store flash based bad block table marker in the OOB area; store it
|
|
* in-band.
|
|
*/
|
|
#define NAND_BBT_NO_OOB 0x00040000
|
|
/*
|
|
* Do not write new bad block markers to OOB; useful, e.g., when ECC covers
|
|
* entire spare area. Must be used with NAND_BBT_USE_FLASH.
|
|
*/
|
|
#define NAND_BBT_NO_OOB_BBM 0x00080000
|
|
|
|
/*
|
|
* Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
|
|
* was allocated dynamicaly and must be freed in nand_release(). Has no meaning
|
|
* in nand_chip.bbt_options.
|
|
*/
|
|
#define NAND_BBT_DYNAMICSTRUCT 0x80000000
|
|
|
|
/* The maximum number of blocks to scan for a bbt */
|
|
#define NAND_BBT_SCAN_MAXBLOCKS 4
|
|
|
|
/*
|
|
* Constants for oob configuration
|
|
*/
|
|
#define NAND_SMALL_BADBLOCK_POS 5
|
|
#define NAND_LARGE_BADBLOCK_POS 0
|
|
#define ONENAND_BADBLOCK_POS 0
|
|
|
|
/*
|
|
* Bad block scanning errors
|
|
*/
|
|
#define ONENAND_BBT_READ_ERROR 1
|
|
#define ONENAND_BBT_READ_ECC_ERROR 2
|
|
#define ONENAND_BBT_READ_FATAL_ERROR 4
|
|
|
|
/**
|
|
* struct bbm_info - [GENERIC] Bad Block Table data structure
|
|
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
|
|
* @badblockpos: [INTERN] position of the bad block marker in the oob area
|
|
* @options: options for this descriptor
|
|
* @bbt: [INTERN] bad block table pointer
|
|
* @isbad_bbt: function to determine if a block is bad
|
|
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for
|
|
* initial bad block scan
|
|
* @priv: [OPTIONAL] pointer to private bbm date
|
|
*/
|
|
struct bbm_info {
|
|
int bbt_erase_shift;
|
|
int badblockpos;
|
|
int options;
|
|
|
|
uint8_t *bbt;
|
|
|
|
int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
|
|
|
|
/* TODO Add more NAND specific fileds */
|
|
struct nand_bbt_descr *badblock_pattern;
|
|
|
|
void *priv;
|
|
};
|
|
|
|
/* OneNAND BBT interface */
|
|
extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
|
|
extern int onenand_default_bbt(struct mtd_info *mtd);
|
|
|
|
#endif /* __LINUX_MTD_BBM_H */
|